Nederman UK & Ireland

Nederman UK & Ireland Visit us at www.nederman.com.

Nederman is an environmental technology company and a global leader in industrial air filtration dedicated to extracting, transporting and cleaning air to make industrial production more efficient, safe and sustainable. Nederman offer the widest range of products and solutions for extraction and filtration of dust and particles, welding fumes, exhaust fumes, oil mist, and combustible dust.

A clean air system is more than the equipment that's installed.Its value comes from how well it performs over time.✔️ Ef...
11/09/2026

A clean air system is more than the equipment that's installed.

Its value comes from how well it performs over time.

✔️ Effective dust and fume capture
✔️ Efficient operation
✔️ Reliable performance
✔️ Adaptability as your needs change
✔️ Service and support throughout its lifetime

That's why good engineering doesn't stop when the installation is complete.

The right design, ongoing monitoring, optimisation, service and maintenance can all help a system continue delivering value for years to come.

Good engineering should keep working for you.

💡 What does long-term value mean to you when investing in an extraction system?

Performance is something you can measure, but you can't optimise what you can't see.Your extraction system might look li...
09/09/2026

Performance is something you can measure, but you can't optimise what you can't see.

Your extraction system might look like it's working normally.

But do you know how it's actually performing?

Airflow can change.
Filters can become loaded.
Energy use can increase.
Production demands can shift.

Monitoring your system can give you greater visibility of what's happening, helping you spot changes in performance, understand energy use and identify where optimisation may be needed.

Because you can't optimise what you can't see.

📊 How much do you know about your extraction system's performance?

Does your extraction system always need to run at full capacity?Manufacturing doesn't always operate at the same level.M...
07/09/2026

Does your extraction system always need to run at full capacity?

Manufacturing doesn't always operate at the same level.

Machines start and stop. Production changes. Different extraction points are used at different times.

But traditional extraction systems can continue running at the same airflow, even when demand is lower.

Demand-controlled extraction can adjust airflow according to what's actually happening in the process.

That can help maintain effective extraction while reducing unnecessary energy use.

It's not about using less extraction. It's about using the right amount.

When an extraction system isn't performing as well as it once did, replacement isn't always the answer.Sometimes, the op...
04/09/2026

When an extraction system isn't performing as well as it once did, replacement isn't always the answer.

Sometimes, the opportunity is already there.

Existing systems can often be improved through:
Optimising airflow
Intelligent controls
Improved filtration
Performance monitoring
Service and maintenance
Targeted upgrades

The right approach depends on the system, the process and what has changed since it was installed.

At Nederman, we can help assess your existing system and determine whether optimisation, upgrading, replacement, or a combination is the right solution.

Because the best solution isn't necessarily the newest one.

It's the one that works best for your operation.

🔍 Could your existing system be doing more?

Your extraction system may still be running.But is it still performing as it should?Over time, your operation can change...
02/09/2026

Your extraction system may still be running.

But is it still performing as it should?

Over time, your operation can change:
• Production volumes increase
• Equipment is added or relocated
• Processes change
• Work areas are reconfigured
• New dust or fume sources are introduced

These changes can affect how your extraction system needs to perform.

And that doesn't automatically mean you need to replace it.

Reviewing your existing system can help identify what's working, where performance may have changed, and whether targeted improvements could bring it back in line with your current requirements.

Before replacing your system, do you know how well your existing one is performing?

Manufacturing rarely stands still.Production changes. Equipment is added or moved. Processes evolve. Layouts change.But ...
31/08/2026

Manufacturing rarely stands still.

Production changes. Equipment is added or moved. Processes evolve. Layouts change.

But what about your extraction system?

A system designed around yesterday's operation may not be optimised for the way your facility works today.

Changes in production can affect airflow requirements, capture points, filtration and overall system performance.

That doesn't necessarily mean you need a new system.

Sometimes, the right approach is to review how your existing system is performing and identify where improvements can be made.

At Nederman, we can help assess existing systems and identify opportunities to optimise, upgrade, monitor or maintain them as your operation evolves.

🔍 Has your extraction system kept up with your manufacturing?

Compliance starts long before an inspection.Meeting regulatory requirements isn't just about paperwork.It's about having...
28/08/2026

Compliance starts long before an inspection.

Meeting regulatory requirements isn't just about paperwork.

It's about having systems that are designed, maintained and operating as they should.

When extraction systems perform effectively, they help support safer workplaces, more efficient operations and greater confidence in day-to-day compliance.

Good engineering makes compliance part of the process, not something to worry about afterwards.

Not sure where to start with LEV compliance? Here is a quick summary of what you need to know.We've published a Q&A cove...
26/08/2026

Not sure where to start with LEV compliance? Here is a quick summary of what you need to know.

We've published a Q&A covering the most common questions around industrial air filtration, LEV, and ATEX; written to give manufacturers straight answers rather than technical jargon.

The short version:
• Having a system installed doesn't mean you're automatically compliant — changes to your process, materials, or output all affect that

• LEV systems need testing every 14 months as a maximum — not annually on a fixed date, because performance varies with temperature and humidity across seasons

• ATEX applies wherever combustible dust is present in sufficient quantities — it's not just a large-site regulation

• In many cases, upgrading what you have is more cost-effective than full replacement

The full article goes into more depth on each of these. Worth a read if compliance is something you want to get on top of this year.

👉 https://www.nederman.com/en-gb/knowledge-center/industrial-air-filtration-lev-atex-compliance

🔍 Is there a compliance question about your setup you've been meaning to look into?

One facility. Multiple clean air challenges.Some workplaces generate wood dust.Others produce welding fumes or vehicle e...
24/08/2026

One facility. Multiple clean air challenges.

Some workplaces generate wood dust.

Others produce welding fumes or vehicle exhaust emissions.

Many have all of them.

That's why effective extraction starts with understanding the process before selecting the solution.

Our recent project at a further education campus in Ballymena brought together extraction systems for woodworking, welding and automotive workshops, creating safer learning environments across the campus.

Every workplace is different.

The right solution should be too.

📖 Read the full project here: https://www.nederman.com/en-gb/knowledge-center/ballymena-case-story

Most downtime starts with small changes.A filter slowly becomes blocked.Airflow reduces.Performance begins to drift.Thes...
21/08/2026

Most downtime starts with small changes.

A filter slowly becomes blocked.
Airflow reduces.
Performance begins to drift.

These gradual changes often go unnoticed until they affect production.

Regular servicing and system monitoring can help identify issues early, keeping your extraction system performing efficiently and helping to avoid unexpected downtime.

Prevention is almost always better than reacting after the event.

Address

Unit 91 Seedlee Road, Walton Summit Centre
Bamber Bridge
PR58AE

Opening Hours

Monday 8:30am - 5pm
Tuesday 8:30am - 5pm
Wednesday 8:30am - 5pm
Thursday 8:30am - 5pm
Friday 8:30am - 5pm

Telephone

+441772334721

Website

Alerts

Be the first to know and let us send you an email when Nederman UK & Ireland posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Nederman UK & Ireland:

Shortcuts

Share

Category