Pjm services

Pjm services I’m a auto fabricator that has a genuine passion to built all kind of custom parts

How your Monday going.. Standard 🤷🏻‍♂️😂
07/09/2026

How your Monday going..

Standard 🤷🏻‍♂️😂

Two new radiators modified to suit the bmw mini. Shortened to suit / inlets and outlets moved and blank mounts added. An...
05/09/2026

Two new radiators modified to suit the bmw mini. Shortened to suit
/ inlets and outlets moved and blank mounts added.

And another one saved from the crap pile. I used one of the sections I removed from the new one to cores repair the older one. So he’s got a emergency back up 😂

When the budget allows 💪 throw back to the little c2 full t45 tig install Supplied by and install in house
02/09/2026

When the budget allows 💪

throw back to the little c2 full t45 tig install

Supplied by and install in house

02/09/2026

Another one that come through our doors for a cooling package to help chase some power and now with Adam adding them finishing touches 👌

I see so many of these things I even see them in my sleep. 😴
01/09/2026

I see so many of these things I even see them in my sleep. 😴

Last bit this morning on this super clean s13 Simple job remove the extra chamber.
01/09/2026

Last bit this morning on this super clean s13

Simple job remove the extra chamber.

Strutbrace/battery tray combo fabbed up and installed. 👌 Something a little bit different. Customer wanted to avoid the ...
31/08/2026

Strutbrace/battery tray combo fabbed up and installed. 👌

Something a little bit different. Customer wanted to avoid the common flat bar and m8 rod through the floor kinda job so he took it to me and asked me todo my thing.

Something a little different on the bench over the weekend. Let’s see what we can do with this .. to make two into one
28/08/2026

Something a little different on the bench over the weekend. Let’s see what we can do with this .. to make two into one

Some more small progress on tommys civicTidied up the inner wings need to make mounts to attach wings to at the front. W...
28/08/2026

Some more small progress on tommys civic

Tidied up the inner wings need to make mounts to attach wings to at the front. Will use rubber edging trim to tidy the end up. Was tempted to close the entire area up but that’s going to add a fair amount of hours and weight so iv priorities other areas.

Radiator mounted still to be modified to suit im probably going to move the filler to a higher location on the side of engine.
Bonnet pins picked up.. easy 👌😂
Wrap around a completed to protect the car. Someone is going to pipe up and say about them pointing towards the wheel. Yes they are but they are about 200mm from the wheel and can always be shortened so save your breath 😂.

Tilting the rad forward will hopefully allow me to make up some ducking to help exit the air up out through the bonnet and hopefully still be able to accommodate a twin fan setup. 🤞 buzzing to cut up his carbon bonnet it’s one of my favourite activities 😂😂

First real post on tommys car. So basically Iv just torn the front end off and started again. The only reason Iv taken t...
26/08/2026

First real post on tommys car. So basically Iv just torn the front end off and started again. The only reason Iv taken the legs back that far was due to some questionable repair so I cut them just behind the repair and plated them and come from there forward.

Thats the basic tube front end done I just need to start adding things in. There is of course still various brackets and mounts to be added to this to accommodate things like cooler etc. both sections are completely removable first section that acts as your slam panel and also your bottom cross member slips over the top of the chassis tube and fixed top and bottom. Then you offer up the actual crossbar (still todo the wraparound to help protect more of the car.

It’s a shame we didn’t have the original front end to compare the weight saving on this. I want to save a much as possible to try offset the added weight of the cooler etc etc.. I have some ideas to apply to this car Iv been itching todo to bobs 🤷🏻‍♂️😂.


Address

Aberdeen
AB116

Opening Hours

Monday 8am - 5pm
Tuesday 8am - 5pm
Wednesday 8am - 4pm
Thursday 8am - 5pm
Friday 8am - 5pm
Saturday 8am - 1pm

Website

Alerts

Be the first to know and let us send you an email when Pjm services posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Pjm services:

Shortcuts

Share

Category