ATEQ

Name: ATEQ
Address: 15 Rue des Dames, Les Clayes-Sous-Bois, 78340, FR
Telephone: +33130801020

ATEQ | One group | 4 divisions

Leak/Flow tester
TPMS
Aviation
E-Mobility ATEQ: One group, 3 divisions.

Leak / Flow tester division
TPMS division
Aviation division

23/06/2026

🚗 𝐔𝐬𝐞 𝐜𝐚𝐬𝐞: 𝐚𝐮𝐭𝐨𝐦𝐨𝐭𝐢𝐯𝐞 𝐜𝐨𝐦𝐩𝐨𝐧𝐞𝐧𝐭 𝐥𝐞𝐚𝐤 𝐭𝐞𝐬𝐭𝐢𝐧𝐠

A production line tests an automotive component with a conventional leak test cycle of 𝟐𝟎𝟎 𝐬𝐞𝐜𝐨𝐧𝐝𝐬.

By integrating the Early Decision Tool:
• Around 𝟗𝟎% 𝐨𝐟 𝐩𝐚𝐫𝐭𝐬 are accepted or rejected before the full cycle ends
• The 𝐚𝐯𝐞𝐫𝐚𝐠𝐞 𝐭𝐞𝐬𝐭 𝐭𝐢𝐦𝐞 𝐝𝐫𝐨𝐩𝐬 𝐭𝐨 𝐚𝐩𝐩𝐫𝐨𝐱𝐢𝐦𝐚𝐭𝐞𝐥𝐲 𝟗𝟗 𝐬𝐞𝐜𝐨𝐧𝐝𝐬.

📈 Productivity increases immediately
📉 Bottlenecks are reduced
✅ No changes to hardware or test method

𝐒𝐚𝐦𝐞 𝐭𝐞𝐬𝐭. 𝐒𝐚𝐦𝐞 𝐫𝐞𝐥𝐢𝐚𝐛𝐢𝐥𝐢𝐭𝐲. 𝐒𝐦𝐚𝐫𝐭𝐞𝐫 𝐝𝐞𝐜𝐢𝐬𝐢𝐨𝐧 𝐭𝐢𝐦𝐢𝐧𝐠.

🔗 : https://hubs.li/Q04j9yWT0

18/06/2026

🧠 𝐄𝐚𝐫𝐥𝐲 𝐃𝐞𝐜𝐢𝐬𝐢𝐨𝐧 𝐓𝐨𝐨𝐥: 𝐭𝐮𝐫𝐧𝐢𝐧𝐠 𝐥𝐞𝐚𝐤 𝐭𝐞𝐬𝐭𝐢𝐧𝐠 𝐢𝐧𝐭𝐨 𝐚 𝐬𝐦𝐚𝐫𝐭, 𝐚𝐝𝐚𝐩𝐭𝐢𝐯𝐞 𝐩𝐫𝐨𝐜𝐞𝐬𝐬

ATEQ’s 𝐄𝐚𝐫𝐥𝐲 𝐃𝐞𝐜𝐢𝐬𝐢𝐨𝐧 𝐓𝐨𝐨𝐥 (𝐄𝐃𝐓) introduces a new way of thinking about leak testing.

Instead of waiting for the full test cycle to end, EDT divides the test into 𝐦𝐮𝐥𝐭𝐢𝐩𝐥𝐞 𝐦𝐢𝐜𝐫𝐨-𝐩𝐡𝐚𝐬𝐞𝐬 and analyzes pressure behavior in real time.

At each step, the system can decide:
🟢 PASS → part is compliant, test stops
🔴 FAIL → part is non-compliant, test stops
⚪ Inconclusive → test continues

This is made possible through a 𝐬𝐭𝐚𝐭𝐢𝐬𝐭𝐢𝐜𝐚𝐥 𝐥𝐞𝐚𝐫𝐧𝐢𝐧𝐠 𝐩𝐡𝐚𝐬𝐞, based on thousands of validated good parts, defining reliable decision thresholds.

📉 The result: 𝐮𝐩 𝐭𝐨 𝟓𝟎% 𝐫𝐞𝐝𝐮𝐜𝐭𝐢𝐨𝐧 𝐢𝐧 𝐚𝐯𝐞𝐫𝐚𝐠𝐞 𝐭𝐞𝐬𝐭 𝐭𝐢𝐦𝐞, while maintaining the same level of accuracy and confidence.

🔗 : https://hubs.li/Q04j9Hwl0

16/06/2026

𝐆𝐫𝐞𝐚𝐭 𝐬𝐚𝐥𝐞𝐬 𝐭𝐨𝐨𝐥𝐬 𝐬𝐭𝐚𝐫𝐭 𝐰𝐢𝐭𝐡 𝐚 𝐝𝐞𝐞𝐩 𝐮𝐧𝐝𝐞𝐫𝐬𝐭𝐚𝐧𝐝𝐢𝐧𝐠 𝐨𝐟 𝐭𝐡𝐞 𝐦𝐚𝐫𝐤𝐞𝐭.

Our Group Marketing & Communication team works with one clear objective:
providing sales teams with the best possible deliverables for their customers.

Brochures, presentations, digital content, corporate assets — each support is designed to be clear, relevant and adaptable.

We collaborate closely with our subsidiaries to understand local expectations, cultural differences and market specificities.

Because strong marketing materials help sales teams build trust, credibility and long-term relationships.

11/06/2026

📊 𝐃𝐍𝐂 𝐢𝐧 𝐚𝐜𝐭𝐢𝐨𝐧: 𝐚 𝐫𝐞𝐚𝐥 𝐥𝐞𝐚𝐤 𝐭𝐞𝐬𝐭𝐢𝐧𝐠 𝐞𝐱𝐚𝐦𝐩𝐥𝐞

Imagine a production line where pressure measurements fluctuate due to:
• HVAC systems
• operator movements
• surrounding equipment

Without noise compensation, these disturbances can appear as false leak signals.

With 𝐃𝐍𝐂 𝐭𝐞𝐜𝐡𝐧𝐨𝐥𝐨𝐠𝐲 𝐚𝐜𝐭𝐢𝐯𝐚𝐭𝐞𝐝 𝐨𝐧 𝐭𝐡𝐞 𝐅𝟔𝟕𝟎𝐋𝐕:
• environmental pressure variations are canceled
• the pressure decay curve becomes stable
• the real leak signal is clearly isolated

📈 Result:
• fewer false rejects
• more consistent test results
• higher confidence in PASS / FAIL decisions

💡 DNC doesn’t increase test sensitivity artificially — 𝐢𝐭 𝐫𝐞𝐦𝐨𝐯𝐞𝐬 𝐰𝐡𝐚𝐭 𝐬𝐡𝐨𝐮𝐥𝐝 𝐧𝐨𝐭 𝐛𝐞 𝐦𝐞𝐚𝐬𝐮𝐫𝐞𝐝.

04/06/2026

𝐂𝐞𝐫𝐭𝐢𝐟𝐢𝐜𝐚𝐭𝐢𝐨𝐧𝐬 𝐝𝐨𝐧’𝐭 𝐞𝐱𝐢𝐬𝐭 𝐨𝐧 𝐭𝐡𝐞𝐢𝐫 𝐨𝐰𝐧. 𝐏𝐞𝐨𝐩𝐥𝐞 𝐦𝐚𝐤𝐞 𝐭𝐡𝐞𝐦 𝐫𝐞𝐚𝐥.

At ATEQ, quality, compliance and security are driven by people before they are defined by standards.

ISO 9001, ISO 14001 and ISO 17025 certifications reflect the daily work of our teams — their rigor, expertise and attention to detail.

Behind every audit, test or process, there are teams committed to doing things right, every day.

Cybersecurity is also part of this commitment: protecting data, systems and customer information is now an essential responsibility.

These certifications are not just labels.

They represent trust, responsibility and long-term commitment to our customers.

🔗: https://hubs.li/Q04j98m_0

02/06/2026

"𝐖𝐞 𝐡𝐚𝐯𝐞 𝐚 𝐥𝐞𝐚𝐤 𝐭𝐞𝐬𝐭𝐢𝐧𝐠 𝐞𝐱𝐩𝐞𝐫𝐭 𝐨𝐧 𝐬𝐢𝐭𝐞." 𝐆𝐫𝐞𝐚𝐭. 𝐁𝐮𝐭 𝐰𝐡𝐚𝐭 𝐡𝐚𝐩𝐩𝐞𝐧𝐬 𝐰𝐡𝐞𝐧 𝐭𝐡𝐞𝐲'𝐫𝐞 𝐠𝐨𝐧𝐞?

In many factories, one person holds all the leak testing knowledge — the go-to expert when machines fail or testers need reprogramming.

When that expertise walks out the door, processes become fragile.

𝐓𝐡𝐞 𝐤𝐧𝐨𝐰𝐥𝐞𝐝𝐠𝐞 𝐠𝐚𝐩 𝐜𝐫𝐞𝐚𝐭𝐞𝐬 𝐫𝐞𝐚𝐥 𝐩𝐫𝐨𝐛𝐥𝐞𝐦𝐬:
→ Unreliable test ex*****on
→ Unplanned production stops
→ Overreliance on manuals no one reads

At ATEQ, we see this challenge daily across industries.

Our solution: hands-on training for maintenance and engineering teams that goes beyond theory to build real confidence on the shop floor.

𝐓𝐡𝐞 𝐨𝐮𝐭𝐜𝐨𝐦𝐞: Your team becomes self-sufficient — maximizing uptime, optimizing leak tester performance, and reducing costly downtime.

👉 Discover how ATEQ training future-proofs your testing process:
https://hubs.li/Q04j94nf0

28/05/2026

𝐋𝐨𝐜𝐚𝐥 𝐬𝐮𝐩𝐩𝐨𝐫𝐭 𝐦𝐚𝐤𝐞𝐬 𝐭𝐡𝐞 𝐝𝐢𝐟𝐟𝐞𝐫𝐞𝐧𝐜𝐞.

In North America, ATEQ’s After-Sales Service teams work closely with customers to provide fast, reliable and efficient support.

Whether on customer sites or in our workshops, the team supports products throughout their entire lifecycle — from installation to maintenance and optimization.

Being close to the field allows our North America teams to understand real operating conditions and respond quickly to customer needs.

This local presence is a key part of ATEQ’s DNA: supporting customers where they are, when they need it.

26/05/2026

“𝐁𝐞𝐡𝐢𝐧𝐝 𝐞𝐯𝐞𝐫𝐲 𝐫𝐞𝐥𝐢𝐚𝐛𝐥𝐞 𝐩𝐫𝐨𝐝𝐮𝐜𝐭, 𝐭𝐡𝐞𝐫𝐞 𝐢𝐬 𝐚𝐜𝐜𝐮𝐫𝐚𝐭𝐞 𝐦𝐞𝐚𝐬𝐮𝐫𝐞𝐦𝐞𝐧𝐭.”

Inside our Metrology department.

𝑊ℎ𝑦 𝑖𝑠 𝑚𝑒𝑡𝑟𝑜𝑙𝑜𝑔𝑦 𝑒𝑠𝑠𝑒𝑛𝑡𝑖𝑎𝑙?
“Because our customers rely on precise, repeatable and compliant measurements.”

𝑊ℎ𝑎𝑡 𝑎𝑟𝑒 𝑡ℎ𝑒 𝑐𝑙𝑖𝑒𝑛𝑡 𝑐ℎ𝑎𝑙𝑙𝑒𝑛𝑔𝑒𝑠?
“Measurement accuracy directly impacts product performance, conformity to standards and trust.”

𝐻𝑜𝑤 𝑑𝑜𝑒𝑠 𝑚𝑒𝑡𝑟𝑜𝑙𝑜𝑔𝑦 𝑠𝑢𝑝𝑝𝑜𝑟𝑡 𝑐𝑢𝑠𝑡𝑜𝑚𝑒𝑟𝑠?
“We work closely with R&D and production to validate products, secure processes and ensure consistent results in real operating conditions.”

𝑊ℎ𝑎𝑡 𝑖𝑠 𝑎𝑡 𝑠𝑡𝑎𝑘𝑒?
“For our customers, metrology means reliability, confidence and long-term performance.”

Metrology is not just a technical function — it is a key value for our customers.

19/05/2026

𝐔𝐍𝐃𝐄𝐑𝐒𝐓𝐀𝐍𝐃𝐈𝐍𝐆 𝐋𝐄𝐀𝐊 𝐑𝐀𝐓𝐄 𝐔𝐍𝐈𝐓𝐒 — 𝐀 𝐃𝐄𝐂𝐈𝐒𝐈𝐎𝐍 𝐌𝐀𝐊𝐄𝐑’𝐒 𝐕𝐈𝐄𝐖

Leak test results can be expressed in:
• Pa or Pa/s (pressure-based)
• cm³/min (flow-equivalent)

📐 Reminder:
1 mbar = 100 Pa

💡 The choice of unit impacts:
• Sensitivity perception
• Reject threshold definition
• Alignment between engineering and quality teams

Clear unit selection = clearer decisions.

🔗https://www.ateq-leaktesting.com/services/training/

14/05/2026

“𝐈𝐧 𝐬𝐦𝐚𝐥𝐥 𝐭𝐞𝐚𝐦𝐬, 𝐯𝐞𝐫𝐬𝐚𝐭𝐢𝐥𝐢𝐭𝐲 𝐛𝐞𝐜𝐨𝐦𝐞𝐬 𝐚 𝐫𝐞𝐚𝐥 𝐬𝐭𝐫𝐞𝐧𝐠𝐭𝐡.”

Meet ATEQ South Africa.

Based in South Africa, the subsidiary is led by Drikus Odendaal, National Technical Services Engineer / Sales.

𝑊ℎ𝑎𝑡 𝑚𝑎𝑘𝑒𝑠 𝑡ℎ𝑖𝑠 𝑠𝑢𝑏𝑠𝑖𝑑𝑖𝑎𝑟𝑦 𝑢𝑛𝑖𝑞𝑢𝑒?
“We are a team of two, covering the entire South African market — and beyond.”

𝐻𝑜𝑤 𝑑𝑜 𝑦𝑜𝑢 𝑚𝑎𝑛𝑎𝑔𝑒 𝑠𝑢𝑐ℎ 𝑎 𝑤𝑖𝑑𝑒 𝑠𝑐𝑜𝑝𝑒?
“It requires strong versatility. Technical expertise, sales, customer support — we do it all.”

𝑊ℎ𝑎𝑡 𝑖𝑠 𝑡ℎ𝑒 𝑘𝑒𝑦 𝑡𝑜 𝑠𝑢𝑐𝑐𝑒𝑠𝑠?
“Being close to customers and understanding their needs, whatever the application.”

Despite its small size, ATEQ South Africa delivers strong local support through commitment, adaptability and a deep sense of responsibility.

Proof that agility and dedication can make a big impact.

Adresse

15 Rue Des Dames
Les Clayes-Sous-Bois
78340

Téléphone

+33130801020

Site Web

https://www.ateq-aviation.com/, https://www.ateq-tpms.com/, https://ateq-emobility.com/, https://www.ateq-leaktesting.co

Notifications

Soyez le premier à savoir et laissez-nous vous envoyer un courriel lorsque ATEQ publie des nouvelles et des promotions. Votre adresse e-mail ne sera pas utilisée à d'autres fins, et vous pouvez vous désabonner à tout moment.

Contacter L'entreprise

Envoyer un message à ATEQ:

Vous voulez que votre entreprise soit Compagnies D'équipement la plus cotée à Les Clayes-sous-Bois ?