MD GROUP

10/12/2025

SGM LEKETRA
Humidity and temperature probe
Model: TU
TU sensors are used to measure relative humidity and ambient temperature even in areas at risk of explosion and / or in places with flammable dusts. The probe comprises a sensor part with a sintered filter mounted on a robust die-cast aluminum housing (transmitter part), both made of stainless steel.
The specific sintered filter and ATEX certification make the TU transmitter particularly suitable for measuring humidity and ambient temperature inside silos for the storage of cereals.
The transmission of the measured values takes place via 2 galvanically separated 4 ÷ 20mA analogue signals.

For More Information :
email: [email protected]
what's App: 012 80079279

08/10/2025

Level Measurement by capacitive principle
The capacitive principle for continuous level measurement is one of the most widely used for industrial applications. Thanks to its flexibility it can be applied to measurements of liquids, solids, granules and powders. The operation is based on the detection of the capacity of the insulation interposed between the electrode and the material to be measured. The instrument can be compact (electrode and insert) in a single unit or separate with a remote insert for applications where there are high process temperatures, high vibration levels or where it is impractical to use a compact version.
we offered Capacitive level transmitter Model: CLT4 From SGM LEKETRA S.r.l
CLT4 is a capacitive instrument, rod probe suitable for general or chemical-pharmaceutical applications for level measurement of conductive, non-conductive liquids or granules. Installation on the top of metal tanks.
For More Information or Inquiry
email: [email protected]
What's app: +2 012 80079279

30/04/2025

Fixed Gas Detectors
Premium, Industrial, and Commercial Gas Detectors
like H2S , METHAN, Petrol Vapours, n‐Butane, Propane, Hexane, Hydrogen, Pentane, Methyl Alcoho, Carbon monoxide etc...

Prosense produces fixed gas detectors to detect combustible, toxic, asphyxiate, and VOC gases in different environmental conditions and sector
Applications
 Oil&Gas
 Petrochemical
 Onshore/Offshore
 Steel‐Metal Industry
 Chemical Industry
 Process Industry
 Gas Distribution Stations
 Water Treatment Plants

if you have any question or inquiry kindly send us on:
[email protected]
+2 01280079279

30/04/2025

if you have not enough spacing to install Electromagnetic flow meter we introduce EUROMAG Electromagnetic flow meter Model: MUT2300EL can be install with no upstream and downstream distances.
The cone shaped section of the internal part of the sensor, allows an optimized and accelerated flow profile which
permits to install the sensor in any kind of condition; no need to have straight sections/segments of pipes upstream
and downstream. This U0-D0 condition enables to have an extreme flexibility on the flowmeter installation position
Specifications:
- Measure of extremely low flow rates, even in problematic applications and “night flows” or low season
- Neglectable pressure drop
- No moving parts
- Empty pipe electrode supplied as a standard (≥ DN65)
- Bi-directional measure
- Coupled with any Euromag converters
- In house wet calibration for all diameters
- Robust, fully welded and potted construction
- Engineered for very demanding applications
- External coating for offshore or subsoil installation.
- Optional paint certified for C4 class environment
- Wide choice of materials for housing and flanges including SS304 and SS316

if you have any question or inquiry kindly contact us on :
[email protected]
+2 01280079279

10/04/2025

10/04/2025

In stock
Clamp on ultrasonic flow meter
Transit time
model: SGM-101F
with sensor for DN300 to DN4000 with 30 mt cable
Origin: Italy
Mobile : 012 80079279
www. mdgroup-eg.com
[email protected]