https://www.facebook.com/100431348200511/

MashalDesigns‎‏, المحلة الكبري, Cairo (2026)

23/05/2026

لقطات حية من مرحلة استلام حديد التسليح والنجارة لسقف فلات سلاب (Flat Slab)، وجاري اللمسات الأخيرة قبل بدء أعمال الصب. 🛠️

خطواتنا الثابتة في كل موقع:
✅ تنفيذ شبكتين حديد (فرش وغطاء) بأعلى كفاءة مع الحفاظ على الكفر الخرساني.
✅ تدعيم مناطق اتصال الأعمدة بـ Drop Panels لمقاومة العزوم السالبة وقوى الاختراق.
✅ إنهاء كافة التمديدات الكهربائية في مساراتها الصحيحة.
✅ مراجعة تقويات النجارة والداير الخارجي لضمان استواء السقف تماماً.

معانا، مشروعك بيتنقّل من لوحة التصميم للواقع بأعلى معايير الجودة والكود الهندسي. 🏗️⚡

MashalDesigns‎‏
Eng/Elsaied Mashaal
010 12987015
01022221020

21/05/2026

We are happy to share with you snapshots of our latest projects after the completion of all finishing and decoration works. As always, we receive the space as an idea on paper and bring it to life step by step until we deliver it to you as a reality full of beauty and comfort.

In this project, we focused on:

💡 Thoughtful lighting distribution: Highlights the beauty of the spaces and gives a sense of spaciousness and tranquility.

🪵 Modern wooden claddings: We combined warm woods with contemporary wall paints to achieve the perfect balance.

📐 Smart use of space: Designing and executing the TV library and storage units to be both practical and elegant at the same time.

If you are looking for finishing that combines quality ex*****on with refined taste, our office is at your service from the initial 3D design to turnkey delivery.

MashalDesigns‎‏
Eng/Elsaied Mashaal
010 12987015
01022221020

19/05/2026

The Meticulous Engineer
From Our Field Updates | Quality Control and Acceptance of Structural Formwork 📐🏗️
Snapshots from our current site as we complete the carpentry work on the ceilings and drop beams, and prepare the rebar for the columns.
At this stage, at Meshal Engineering Consultancy, we focus on verifying structural details prior to pouring:
Levels and elevations: Thoroughly checking the ceiling’s horizontal alignment and adjusting the thresholds of doors and windows.
Bracing and reinforcement: Ensuring the adequacy of timber bracing and the distribution of beams and braces to prevent any sagging or buckling under concrete pressure.
Section dimensions: Verifying that the dimensions of beams and columns match the approved construction drawings.
Quality in ex*****on is the foundation of a structure’s safety and sustainability, and our on-site engineers never compromise on strict code compliance.

Option 2: Premium Marketing (Targeted at the Ideal Client)
A safe investment starts with a “solid foundation” and the right ex*****on formula 💎🔨
A brilliant design on paper is only complete with strict on-site engineering supervision. We’re sharing updates on the work in progress at one of our projects, where ceiling installation, drop beams, and column reinforcement are being executed with the highest engineering precision.
At Mishaal Engineering Consultants, we relieve you of the burden of monitoring and contractor manipulation; we guarantee you:
✔️ Minimal material wastage (rebar and concrete).
✔️ Precise engineering handover at every stage (carpentry, steelwork, casting).
✔️ Compliance with standard specifications to ensure the building’s longevity without cracks or future defects.
Your home or project is the investment of a lifetime… entrust it to the experts.
📥 For engineering consultation or to request construction supervision, contact us via message.
Eng/Elsaied Mashaal
010 12987015
01022221020

17/05/2026

خطوة جديدة وثابتة في مشروعنا الحالي.. جاري الآن أعمال الحدادة وتجهيز اللبشة المسلحة بأعلى معايير الجودة والدقة الهندسية.

اللبشة مش مجرد صبة خرسانية، دي الأساس اللي بيضمن استقرار المبنى وتوزيع الأحمال بأمان تّام، خاصة في المناطق السكنية المزدحمة لضمان سلامة المنشأ والمباني المجاورة. 💪

✨ التزام بكافة التفاصيل الإنشائية والكود الهندسـي.

✨ إشراف هندسي دقيق على كل سيخ حديد وإشارة عمود.

✨ تنفيذ وتأمين متكامل للموقع.

نسعى دائماً لتقديم أفضل جودة لعملائنا لأن الأساس الصح.. بيعيش العمر كله. 🎯

مكتب مشعل للاستشارات الهندسية والتصميم الداخلي 📐✨
مهندس / السعيد مشعل
010 12987015
01022221020
#مقاولات .

06/05/2026

This new set of photos shows another construction site in the advanced stages of foundation work (slabs and ground-level columns). Here is a detailed description of the work based on the photos from image_2.png to image_6.png:

Main work in progress (stages):

The photos show the concrete pouring process for the floor slabs (ground beams) and column bases, a stage that follows the rebar work and footing reinforcement we saw in the previous photos.

1. Concrete Pouring - (Images image_2.png and image_3.png):

These images are the most important because they show the pouring process actually taking place.

Concrete Transport: Workers use handcarts to transport the ready-mix concrete from the mixing area to the pouring site. In image_2.png and image_3.png, two workers are shown pushing a handcart filled with concrete over wooden walkways (temporary platforms) built atop the floor formwork.

Wooden walkways: Walkways made of wooden planks were built over the formwork to allow workers and handcarts to move (relatively) safely over the rebar and formwork without damaging them.

Mixing area: In the background of image_3.png on the left, a mechanical concrete mixer (beehive mixer) and piles of materials (sand and gravel) and bags of cement are visible, confirming that the concrete is being mixed on-site.

Compaction/Vibration: In image_2.png on the right, a worker is seen holding a mechanical vi****or or a piece of wood to compact the concrete inside the formwork to ensure all voids around the rebar are filled and to prevent voids.

2. Wooden Formwork and Reinforcing Bars (Formwork & Rebar) - (Images image_4.png, image_5.png, image_6.png):

Formwork Setup: These images show the complex structure of the wooden formwork that forms the floor slabs and column heads. The formwork is made of wooden panels (formwork panels) supported by wooden struts (struts) and

MashalDesigns‎‏
Eng/Elsaied Mashaal
010 12987015
01022221020

06/05/2026

The main work shown in the photos involves the preparation and construction of reinforced concrete columns for the upper floors. This process includes the following steps:
1. Wooden Formwork:
This is the most prominent and voluminous element in the photos. A complex and massive wooden structure (beams, joists, and plywood panels) was constructed for two main purposes:
Creating vertical formwork: The wooden formwork serves as casting molds for the future concrete columns. These molds are made of formwork panels and carefully secured vertically to ensure the columns are straight.
Building the Scaffolding: An interlocking horizontal and vertical wooden structure was built to serve as scaffolding or an elevated work platform. This structure is necessary to allow workers to access the top of the column formwork to install rebar later, or to pour concrete from above (if poured manually).
Non-compliance: As mentioned earlier, this rudimentary formwork/scaffolding lacks basic safety measures and appears unstable as a work platform.
2. Rebar Work:
Although the rebar inside the vertical formwork is not clearly visible in these photos (because it is surrounded by wooden panels), the presence of so many wooden column forms necessarily implies that rebar work is underway. The workers on the elevated platform may be in the process of securing the rebar inside the forms or preparing it for pouring.
3. Concrete Preparation:
A mechanical concrete mixer (beehive mixer) is visible in the center of the image. This mixer is used to mix the concrete components (cement, sand, gravel, and water) directly on site.
A worker (in the first photo) is standing near the mixer, apparently preparing it for operation or feeding it with materials.
There is a large bucket (bowl/trough) beneath the mixer’s discharge chute to receive the concrete.
Eng/Elsaied Mashaal
010 12987015
01022221020

04/05/2026

1. Checking Formwork and Dimensions

Reinforcement: Ensure that the formwork is properly secured and supported by sufficient beams to withstand the concrete pressure during pouring, preventing warping or formwork bursting.

Dimensions and Angles: Carefully review the measurements and ensure they match the engineering drawings precisely. Verify the straightness of the lines and the angles (squares).

2. Insulation and Protection

Plastic Cover: It's excellent that you're using a green plastic cover as shown in the pictures. This helps protect the concrete from groundwater seepage and prevents the concrete from absorbing water, thus retaining water.

Site: Ensure that any wooden debris or nails are removed from the work site before starting with the reinforcement or pouring the concrete.

3. Steel and Casting (Next Steps)

Concrete Spacers: When placing reinforcing steel, ensure you use spacers (small plastic or concrete pieces) approximately 5 cm above the steel reinforcement, surrounding it with steel reinforcement on all sides to prevent rust.

Mechanical Vi****or: Don't forget to use a vi****or during casting to prevent honeycombing (air voids) within the concrete mix.
Eng/Elsaied Mashal
010 12987015
01022221020

02/05/2026

هل تمتلك أرض فضاء أو ترغب في تعلية عقارك؟ نحن في مكتب م/ السعيد مشعل نحول حلمك إلى واقع ملموس بنفس دقة وفخامة التصميم الموضح في ملف 3d

خدماتنا المتكاملة تشمل:

تراخيص البناء: استخراج تراخيص (أرض فضاء/تعلية) وإعداد الملف الهندسي بالكامل.

قانون البناء: اعتماد الأوراق لدى مجلس المدينة والمصالحة طبقاً للمواصفات القانونية.

التصميم والاشراف: تصميم معماري راقي وإشراف هندسي دقيق على كل خطوة في التنفيذ.

المقاولات والتشطيبات: تنفيذ مقاولات متكاملة وتشطيبات وديكورات حديثة تناسب ذوقك.

لماذا تختارنا؟
✅ سرعة فائقة في التنفيذ.
✅ أقل التكاليف مع أعلى جودة.
✅ خبرة هندسية تضمن لك الأمان والجمال.

📍 للتواصل والاستفسار:
م/ السعيد مشعل
01012987018

02/05/2026

Tile Installation Progress
The provided media captures various stages of a tile installation project, presumably for a bathroom or a larger living space. Here's a breakdown of the key elements visible:

Tiling Process & Tools
Tile Leveling Systems: Throughout the images and video, numerous grey tile leveling clips and wedges are visible along the grout lines. These are essential for ensuring a perfectly flat surface and consistent spacing between tiles.

Wall & Floor Tiling: The project includes both marble-patterned wall tiles and large-format floor tiles in a similar light color.

Sand Substrate: In several shots, the floor tiles are being laid over a thick layer of sand, which is a traditional method used to level the subfloor before applying adhesive.

Active Installation: One image shows workers actively applying adhesive and placing tiles, while the video captures a worker using a rubber mallet to set a tile into place.

Essential Tools: Other tools visible include levels, buckets for adhesive, trowels, measuring squares, and a laser level mounted on a tripod for precision.

Room Features & Prep
Wall Cutouts: There are precise cutouts in the wall tiles for electrical outlets, plumbing fixtures, and what appears to be a recessed wall niche.

Ceiling Work: The video also shows a coffered ceiling with wiring for multiple recessed lights and potentially a central fixture.

Unfinished Areas: Some sections of the room still have exposed grey concrete or plaster walls, indicating that tiling is still in progress.
MashalDesigns‎‏
Eng/Elsaied Mashal
010 12987015
01022221020

02/05/2026

Formwork and Reinforcement of Columns and Slabs

Details of Ongoing Work:

Reinforced Formwork: The formwork for the columns and sides has been completed, and the slab has been prepared using sturdy wooden beams to ensure a level concrete surface.

Reinforced Steelwork: The process of reinforcing the columns (preparing the steel cage) and connecting the stirrups has begun, ensuring precise geometric distribution of the steel according to the plans.

Electrical Installations: The distribution of electrical conduits (red) above the slab is clearly visible, establishing the lighting and power network before the concrete pouring process.

Quality and Safety Notes:

Formwork Reinforcement: Workers are seen reinforcing the formwork (strengthening with beams) to prevent any sagging or movement during concrete compaction.

Site Cleanliness: The site appears organized with good distribution of timber and materials to ensure the free movement and safety of the workers.

Next Steps:

Completion of the slab reinforcement (base and top) and beams.

Final Inspection of Electrical Installations
MashalDesigns‎‏
Eng/Elsaied Mashal
010 12987015
01022221020

02/05/2026

Excavation and Site Preparation for Construction

2. Current Work Description:

Excavation Operations: Excavation work has commenced using a hydraulic excavator (Komatsu PC120) to reach the required foundation level.

Soil Management: Debris and clay soil have been removed, and the site has been cleaned and prepared.

Work is being carried out under direct supervision to ensure the excavation is straight and the site's sides (adjacent walls) are secured.

Groundwater/Surface Water: Water accumulation has been observed at the excavation site. This is currently being addressed, and the site is being dried to ensure soil safety before the placement of the backfill layer or plain concrete.

Protection of Neighbors: Work is proceeding cautiously near the walls of adjacent buildings to ensure their foundations are not affected.

4. Next Steps:

Complete the leveling of the foundation and remove all excess soil.

Prepare the site for pouring the "leaning layer" (plain concrete) after ensuring the soil is completely dry.
MashalDesigns‎‏
Eng/Elsaied Mashal
010 12987015
01022221020

MashalDesigns‎‏

23/05/2026

21/05/2026

19/05/2026

17/05/2026

06/05/2026

06/05/2026

04/05/2026

02/05/2026

02/05/2026

02/05/2026

02/05/2026

Address

Telephone

Website

Alerts

Contact The Business

Shortcuts

Share

Category