Was ist die Webseite?

REVOLUTION DESIGN RACING PRODUCTS

Startseite
Deutschland
Surheim
REVOLUTION DESIGN RACING PRODUCTS

REVOLUTION DESIGN RACING PRODUCTS - The new level for RC Car Products. http://www.revolution-rc.com/

REVOLUTION DESIGN RACING PRODUCTS - High-End RC Car Racing Products for professionel Racers. Innovative High-Precision Tools, Option Parts and Accessories with outstanding Design and Quality - Engineered in Germany.

13/05/2026

Next Level Steering Performance for your B84!

Eliminate chatter and gain precision! We are proud to introduce the brand-new Revolution Design DJ Front Driveshaft Sets specifically engineered for the Team Associated B84.

Whether you’re pushing the limits in the Modified class or fighting for every thousandth in Stock racing, our Double Joint (DJ) driveshafts eliminate front-end vibrations at full steering lock, providing a noticeably smoother and more consistent feel on the track.
Choose Your Setup:

RDRP0732 | B84 DJ Front Driveshaft Set
The go-to choice for the Modified Class. These shafts are built to handle the massive power of modern modified motors while maintaining a slim weight of just 23g per pair. Maximum smoothness for the tightest lines!

https://revolution-rc.com/Revolution-Design-B84-DJ-Front-Driveshaft-Set_1

RDRP0733 | B84 DJ Lightweight Front Driveshaft Set
Specially optimized for 10.5T and 13.5T Stock Racing. Weighing in at only 21g per pair (2g lighter than the standard version), these shafts further reduce rotating mass at the front axle. The result: snappier acceleration and maximum drivetrain efficiency—the decisive advantage in competitive Stock racing!

https://revolution-rc.com/Revolution-Design-B84-DJ-Lightweight-Front-Driveshaft-Set-For-105T-135T-Stock-Class_1

Key Features at a Glance:

✅ Vibration-Free: Double-joint design prevents front-axle "chatter" during cornering.

✅ Precise Handling: Increased driver confidence and more consistent lap times.

✅ Weight Optimized: Perfectly balanced for your racing class (21g Stock / 23g Modified).

✅ Direct Fit: Designed specifically for the Team Associated B84.

Upgrade your front end today and feel the difference from the very first turn!

22/04/2026

RDRP B84 MonoCore 7075 Aluminum Chassis Set – Maximum Performance & Durability

https://revolution-rc.com/Revolution-Design-B84-MonoCore-7075-Aluminium-Chassis-Set_1

Take your Team Associated RC8B4 or RC8B4D to the next level. The Revolution Design B84 MonoCore Chassis Set is the result of extensive development in collaboration with the RDRP race team. The goal was clear: create a chassis that is not only faster, but significantly more durable than standard components.

Optimized Design for Stability and Flex

Compared to the original, the chassis layout has been completely revised. The front and rear sections, where the gearboxes are mounted, have been widened. This adjustment increases overall strength while also improving the flex characteristics of the car. The result is more consistent handling and increased grip in critical sections of the track.

Revolutionary B Suspension Mount

Special attention has been given to the critical front kick-up area. While conventional designs often reach their limits here, RDRP introduces an innovative solution: the included B suspension mount is made from high-strength steel and is secured using a central screw combined with two precision locating pins. This construction distributes forces more effectively, eliminates weak points, and ensures exceptional durability even under hard landings.

Service-Friendly and Well Thought Out

Another highlight is the integrated carbon ESC plate. This allows you to remove or replace the ESC quickly and easily without having to scrape double-sided tape from the chassis. A must-have feature for serious racers.

Premium Materials & Signature RDRP Look

Manufactured from high-grade 7075-T6 aluminum, the chassis delivers the perfect balance of weight and rigidity. Visually, it stands out with the signature RDRP finish: deep black anodizing combined with elegant silver chamfered edges, giving your vehicle a true factory look.

FEATURES:
•Material: High-quality 7075-T6 aluminum for maximum durability
•Geometry: Wider front and rear design for optimized flex and stability
•Durability: Includes heavy-duty steel B mount with new single-screw pin fixing system
•Innovation: Integrated carbon ESC plate for quick servicing
•Design: Black anodized finish with premium silver chamfers
•Compatibility: Fits Team Associated RC10B84 and RC10B84D

Scope of Delivery:
•B84 7075 Chassis Plate
•B84 Suspension Mount B Steel (fits only RDRP0756 B84 chassis)
•B84 Carbon Electronic Plate (fits only RDRP0756 B84 chassis)
•Hardware

27/02/2026

The Revolution Design Vented Decoupler Slipper Plate Set is designed to keep your decoupled slipper working more consistently from start to finish. The vented design improves cooling, helping reduce performance drop off over a complete run and delivering a smoother, more repeatable slipper action.

At only 6.5 g, the set is also 2.1 g lighter than the original parts, supporting a more responsive feel without sacrificing reliability.

FEATURES
• Fits Team Associated B84 and B74 Decoupled Slipper
• Vented design for improved cooling and reduced fade over the run
• Smoother and more consistent slipper function throughout the runtime
• Lightweight design for improved efficiency and response

TECHNICAL DATA
Compatibility: Team Associated B84, B74 (Decoupled Slipper)
Weight: 6.5 g

https://revolution-rc.com/Revolution-Design-B84-Vented-Decoupled-Slipper-Plate-Set_1

26/02/2026

New lightweight drivetrain upgrades for the Team Associated B84 with center differential: Revolution Design Lightweight Center Driveline Sets RDRP0738-FMP and RDRP0738-RMP.

Both sets reduce drivetrain weight and rotating mass for a sharper, more responsive feel on track, ideal for Stock and Modified racing. Each set weighs only 15.25 g and is made from hard anodized 7075 aluminum, with plastic blades for the driveshafts.

Key highlight of the RDRP0738-FMP: it enables running the motor in the forward position together with the center differential, a setup that was not possible before.

https://revolution-rc.com/Revolution-Design-B84-Lightweight-Center-Driveline-Set-For-Center-Diff-Forward-Motor-Position_1

https://revolution-rc.com/Revolution-Design-B84-Lightweight-Center-Driveline-Set-For-Center-Diff-Rear-Motor-Position_1

19/02/2026

Fresh tuning parts for your Xray XB2 25/26: the new Revolution Design Bulkheads with +/-3° option are here.

With two material choices you can fine tune front end weight and balance to match the track. Go with the RDRP0762 aluminium bulkhead (12 g) for a lighter front and a more lively feel, or choose the RDRP0763 steel bulkhead (44 g) to add weight up front for more planted steering. Same geometry, same +/-3° setup range, just the front end weight you need.

https://revolution-rc.com/Revolution-Design-XB2-26-25-Aluminium-Bulkhead-3-12g_1

https://revolution-rc.com/Revolution-Design-XB2-26-25-Steel-Bulkhead-3-12g_1

17/02/2026

The Revolution Design 1/10 ULTRA Wing series has been developed for the latest generation of 1/10 electric offroad buggies. The carefully sculpted profile delivers a planted yet free rotating rear end, more corner speed and improved forward drive while keeping jumping and landing behavior predictable. All ULTRA Wings are molded from high quality clear polycarbonate and come fully pre cut so you only have to drill the mounting holes. Fine trim lines along the trailing edge allow for easy aerodynamic tuning. Designed for medium to high grip indoor and outdoor tracks, the range offers two widths and three material thickness options so you can always choose exactly the right balance of rotation, stability and durability. Developed together with our team driver and IFMAR Worlds A finalist Joona Haatanen, the ULTRA Wing delivers race proven performance for serious 1/10 buggy racing.

https://revolution-rc.com/Wings

FEATURES:
- Performance rear wing for 1/10 electric offroad buggies
- Modern high downforce profile for more corner speed and forward traction with good rotation
- Supplied fully pre cut for fast, repeatable installation
- Available in 0.8mm, 1.0mm and 1.2mm thickness
- Developed together with IFMAR Worlds A finalist Joona Haatanen

31/12/2025

Many of you have asked about it, so yes, we are working on a B84 chassis. We are currently on track for a mid to late February release.

The chassis features a wider front and rear section for improved flex and durability. It is, of course, made of strong 7075 aluminium.

08/12/2025

Revolution Design B7 | T7 HD Suspension Mount C

Revolution Design's HD Suspension Mount C for Team Associated's latest T7 and SC7 trucks, as well as updated B7 buggies equipped with the new 3-gear transmission, is a must-have upgrade for racers looking for enhanced durability and tuning options. Available in two variants, standard geometry (RDRP0757) and a -1° toe-in version (RDRP0758), these mounts are machined from high-quality 7075 aluminum and offer a stronger, more robust design than the stock parts.

The standard version (RDRP0757) maintains the factory suspension geometry and is ideal for most conditions. The -1° version (RDRP0758), on the other hand, reduces rear toe-in by 1° and is particularly suited for high-grip tracks, offering improved rotation and corner speed. Both versions feature refined design with extra material at critical stress points.

Features
•Direct fit for Team Associated T7, SC7 and updated B7 with 3-gear transmission
•CNC-machined from premium 7075 aluminum
•Two versions available: Standard geometry (RDRP0757) and -1° toe-in (RDRP0758)
•-1° version improves rotation and cornering on high-traction tracks
•Reinforced design with added material for improved strength and durability
•Durable black anodized finish with laser-etched markings

Technical Data
•Material: 7075-T6 aluminum
•Compatibility: Team Associated T7, SC7, and B7 with 3-gear gearbox
•Geometry: Standard (RDRP0757) / -1° toe-in (RDRP0758)
•Finish: Black anodized

RDRP0757 Revolution Design B7 | T7 HD Suspension Mount C (Aluminium | black)
https://revolution-rc.com/Revolution-Design-B7-T7-HD-Suspension-Mount-C-Aluminium-black_1

RDRP0758 Revolution Design B7 | T7 -1° HD Suspension Mount C (Aluminium | black)
https://revolution-rc.com/Revolution-Design-B7-T7-1-HD-Suspension-Mount-C-Aluminium-black_1

01/12/2025

We gave our website a little refresh!

www.revolution-rc.com

28/11/2025

Revolution Design Ultra Spur Gears 64dp

Ultra Spur Gears from Revolution Design deliver crisp, efficient drivetrain performance for 64dp applications. The precisely cut tooth profile reduces friction and noise, the gear runs exceptionally true for consistent mesh and long life, and the specially optimized polymer blend offers an ideal balance of stiffness and wear resistance. Choose the tooth count that matches your track and motor setup, mount up, and enjoy smooth, repeatable power delivery.

https://revolution-rc.com/Spur-Gears

Features
•Accurate 64dp tooth profile for low friction and quiet operation
•Outstanding concentricity for consistent gear mesh and efficiency
•Optimized high-strength polymer for durability
•Lightweight, open-spoke design helps reduce rotating mass
•Clean molded finish with stable fit on standard hubs

Adresse

Surheim

Webseite

http://www.revolution-rc.com/

Benachrichtigungen

Lassen Sie sich von uns eine E-Mail senden und seien Sie der erste der Neuigkeiten und Aktionen von REVOLUTION DESIGN RACING PRODUCTS erfährt. Ihre E-Mail-Adresse wird nicht für andere Zwecke verwendet und Sie können sich jederzeit abmelden.

Service Kontaktieren

Nachricht an REVOLUTION DESIGN RACING PRODUCTS senden:

Verknüpfungen

Wollen Sie Ihr Service zum Top-Ausrüstungsservice in Surheim machen?