BEMO

18/06/2026

Buongiorno, Italia. 🇮🇹

The BEMO website is now also available in Italian – featuring all the products, system details and case studies that architects and designers need for their projects.

👉 www.bemo.com/it

16/06/2026

𝗡𝗲𝘄 𝗥𝗲𝗳𝗲𝗿𝗲𝗻𝗰𝗲: Sometimes a project doesn't need to reinvent the roof. It just needs to get it right. 😎

After the former clubhouse in Bergschenhoek burned down, the architects at .architecten chose a standing seam gable roof — and the result speaks for itself. Clean lines, a material that ages well, and a form that fits without forcing anything.

Not every roof needs to be a statement. Some just need to last.🦾

📍 Project Information
Architect: Stats architecten
Product: BEMO Standing Seam
Installation: Kempen Cladding B.V.

11/06/2026

The 2026 World Cup kicks off today! ⚽

For the 2026 World Cup we built the only glossary that actually matters – football terms, architect edition. Offside, VAR, red card. All redefined. Swipe through. 👆

What other translations can you think of? Tell us!

09/06/2026

Unique architecture in Čepin, Croatia! 🎼

The extraordinary EVE Music Hall is currently under construction. Our BEMO standing seam profiles form the water-bearing layer and serve as the substructure for the limestone facade. This is installed as a BEMO-SMOOTH system using our BEMO-TOP rails and forms the design layer. 🤝

Our mobile roll-forming machine is on site for the production and curving of the standing seam profiles. Swipe to see it in action. 😬

📌 Short facts:
Product: BEMO standing seam N65-500 concave curved
Architecture:
Installation: FDB-Projekt kft

We are incredibly proud to be part of such a magnificent project – even if, in the end, you won’t be able to see the standing seam cladding at all. 😅

02/06/2026

𝗣𝗿𝗼𝗷𝗲𝗰𝘁 𝗥𝗲𝗽𝗼𝗿𝘁: This facade doesn't follow the rules. 📐

Augustenstrasse 2, Stuttgart: A refurbishment right in the city centre with a facade that means business. 600 m² in a tight urban setting — highest demands on aesthetics, durability and thermal insulation.

What makes it special? Substructure angles of up to 121°. Planners and fabricators had to master some serious geometric deviation from anything standard.

Designed by Plan 11 GmbH, installed by Altvater GmbH Metallverarbeitung — great teamwork on a tough one.

Full project story below. 👇
🔗 https://bemo.com/en/news/bemo-bond-inviso-tackles-challenging-slopes/

What's the trickiest angle you've ever worked with? Let us know in the comments. 💬

Facade renovation in the center of Stuttgart with BEMO-BOND INVISIO composite panels, BEMO substructure and inclinations of up to 121°.

27/05/2026

The next days, many of our colleagues are celebrating Eid al-Adha. A moment that reminds us what makes our team special – people from different cultures, building something together.

Wishing you all a blessed celebration. 🤝

22/05/2026

POV: It’s friday and almost the weekend ➡️ Disco mode activated 🪩

How do you like the BEMO logo disco version?

19/05/2026

𝗪𝗼𝗿𝗸 𝗶𝗻 𝗣𝗿𝗼𝗴𝗿𝗲𝘀𝘀 - 𝗖𝗼𝗻𝘀𝘁𝗿𝘂𝗰𝘁𝗶𝗼𝗻 𝘀𝗶𝘁𝗲 𝗶𝗻𝘀𝗶𝗴𝗵𝘁𝘀.

The new laboratory building for the MVZ in Koblenz is almost done — final assembly is underway — and looking at it, you wouldn't immediately guess how much engineering problem-solving went into the facade. 👀

The concept by Vollack Gruppe was clear from the start: a building that belongs to its region. Metal surfaces textured like Mittelrhein slate and white bands running across the facade like the Rhine and Moselle rivers. Simple as an idea, but less simple to build.

With cantilevers up to 1,350 mm, complex geometries and areas demanding a near-perfect finish, none of our standard systems were going to cut it. Therefore we developed a bespoke substructure specifically for this project. 😎

In the end we used BEMO‑BOND composite panels across most of the surface, BEMO‑BOND INVISIO where precision really mattered, TEKOFIX-A++ thermal brackets in the substructure, and partially perforated trapezoidal profiles .

The project is a good reminder that complex facade projects don't have to be a nightmare, they just need the right people talking to each other early enough. 🤝

Great work by the installation team at HPM Fassadentechnik 👏

12/05/2026

Sometimes the real craft is in the things you don't notice straight away. 😎

The new headquarters of Jöbstl Bauerngut GmbH in Styria, Austria is a good example. The interplay of three standing seam profile widths, integrated gutters and perforated facade elements feels effortless – but it isn't. Around 1,300 m² of metal cladding, seamlessly from roof to facade with BEMO-FLON Protect and PV via the BEMO Akkord System.

Functionality that doesn't need explaining. You just see it.

📍Short Facts
Architect: AVA - Andrea Vattovani Architecture
Product: BEMO standing seam
Installation: WHS GmbH
Photos: Paul Ott

12/05/2026

When metal flows: at the new headquarters of Jöbstl Bauerngut GmbH in Straß (Austria), the roof and facade are a seamless whole. 🤩

Three different standing seam profile widths create rhythm and depth. The dark-contrasting window and door frames provide just the right accents. And if you look closely, you’ll discover integrated rain gutters, a sloping plinth and perforated facade elements – details you can’t see, but which make the building envelope unique. ✨

📍Short Facts
Architect:
Product: BEMO standing seam
Installation: WHS GmbH
Photos: