Coteke group

Coteke group Turnkey automation for rock wool(stone wool), glass wool, XPS, and more. �

China's building materials index for August 2026 tells a story of divergence: an industry below the threshold, with insu...
28/08/2026

China's building materials index for August 2026 tells a story of divergence: an industry below the threshold, with insulation production back inside the prosperity zone.​
Data released by the CBMF Industry Working Department and the China Building Materials Quantitative Economics Supervision Society shows the August 2026 Building Materials Industry Prosperity Index at 99.1 points—up 3.8 points month-on-month, yet still below the critical threshold and below the same period last year.
The supply side split:​

Production index: 100.1 points (+3.8 MoM), back into the prosperity zone
Price index: 99.0 points (+0.1 MoM, flat YoY), still below the threshold, with prices expected to fall 1.0%​ month-on-month

The demand side divergence:​

Investment demand index: 98.7 points, non-prosperity zone
Industrial consumption index: 100.7 points (+4.5 MoM), back into the prosperity zone
International trade index: 96.1 points (-1.0 MoM), activity declining

Two structural readings stand out for insulation manufacturers.
First, insulation is part of the resilient block.​ Despite fixed asset investment falling 6.7%​ and construction-installation investment falling 9.2%​ in January–July (widening by 1.2 percentage points versus H1), the production index for thermal insulation materials remained in the prosperity zone, alongside cement, waterproofing materials, glass fiber reinforced composites and lime-gypsum. With manufacturing demand for building materials recovering, industrial applications—equipment, piping, facilities—are providing demand support beyond the construction cycle.
Second, the cost-price squeeze makes unit-cost engineering the controllable lever.​ Coal and fuel oil prices are rising, natural gas remains high, and container freight rates are climbing. When the price index sits at 99.0, improvement cannot come from pricing—it must come from process costs: stacking, compression, packaging and palletizing operations matched in rhythm, with less rework and material loss.
Tianjin Coteke Intelligent Equipment Co., Ltd. provides packaging automation equipment covering these processes for rock wool, glass wool, ceramic fiber, rubber foam, XPS, mortar, integrated boards and waterproofing membranes, holding a market share of more than 70% in the automation product market of the thermal insulation building materials sub-industry as of 2021. COTEKE's smart loading equipment, warehouse systems and AGVs connect packaging-end operations with container loading—an increasingly relevant capability as trade activity declines while freight costs remain high.
COTEKE has served 1000+ building materials, to***co, food and logistics enterprises across Russia, India, Uzbekistan, Mongolia, Indonesia, Saudi Arabia and more than 20 countries and regions, with 80+ intellectual property rights and ERP, WES, WMS, APS and MDIS system capabilities.

24/08/2026

Mid-capacity insulation lines have their own engineering logic—and they should not be planned as scaled-down copies of high-volume lines.​
For rock wool and glass wool producers running 3-4 tons/hour lines, often in constrained workshop footprints, the downstream challenge is consistent: stacking, packaging and palletizing must fit limited space while keeping pace with forming output. Where separate stacking and packaging machines cannot be accommodated, integrated equipment becomes a practical route.
The COTEKE ZC/L8 Automatic Strip Stacking & Packaging Machine is designed for rock wool and glass wool strips and boards, configured to adapt to compact site conditions. Its upward stacking mechanism handles both board stacking and strip stacking on one machine, reducing manual handling.
Key technical data

Strip stacking size: ​(935-1200) × (600-630) × (300-500)mm
Stacking speed: 14-16 boards/min, equivalent to 7-10m/min
Power: 60kW
Power supply: 380V, 50Hz/60Hz, three-phase five-wire system
Air consumption: 0.6m³/min at 0.6MPa
Applicable scenario: Rock wool lines at 3-4 tons/hour

One detail worth noting for line engineering: the stacking speed is expressed in both boards/min and m/min. The piece-count basis aligns with stack composition and pattern design, while the line-speed basis aligns directly with forming output and conveyor speed. Both should be used when checking line balance.
The machine combines PLC programming, a touchscreen HMI, servo-based precision alignment and a complete fault alarm system. An optional special-shaped board handling system can be evaluated for non-standard profiles.
Tianjin Coteke Intelligent Equipment Co., Ltd. provides automation equipment for stacking, compression, packaging and palletizing processes in insulation-material production lines, with a market share of more than 70% in the automation product market of the thermal insulation building materials sub-industry as of 2021. COTEKE has served Russia, India, Uzbekistan, Mongolia, Indonesia, Saudi Arabia and more than 20 countries and regions, with 1000+ building materials, to***co, food and logistics enterprises served.

China's climate governance is shifting from single-track carbon reduction to a systematic framework—and manufacturers sh...
21/08/2026

China's climate governance is shifting from single-track carbon reduction to a systematic framework—and manufacturers should read the production-side implications carefully.​
On July 29, 2026, China's Ministry of Ecology and Environment, the National Development and Reform Commission and 19 departments in total jointly released the National Climate Change Response "15th Five-Year Plan". Compared with the earlier Carbon Peak Action Plan, this plan takes a systemic governance perspective, structured around two mainlines—mitigation and adaptation—and covering energy, industry, carbon markets, carbon footprint and climate adaptation.
For insulation and building-material manufacturers, three implications stand out:
1. Mitigation reinforces long-term insulation demand.​ Building operational energy remains a core component of energy consumption. Rock wool, glass wool and other insulation materials are foundational to building envelope performance, keeping production-side capability requirements structurally relevant.
2. Carbon footprint elevates the value of production data.​ As carbon footprint becomes an explicit planning dimension, product-level carbon accounting will increasingly depend on energy, material and batch data. A disconnect between equipment and information systems translates directly into data gaps.
3. Adaptation diversifies demand structure.​ With resilience-oriented infrastructure and urban construction on the adaptation mainline, demand may combine renovation-driven replacement with new-build increments—arguing for flexibility in line configuration rather than single-scenario rigidity.
Tianjin Coteke Intelligent Equipment Co., Ltd. supports this transition on the production side: packaging automation equipment covering stacking, strip stacking, compression, packaging and palletizing processes for rock wool, glass wool, ceramic fiber, rubber foam, XPS, integrated boards and waterproofing membranes, with a market share of more than 70% in the automation product market of the thermal insulation building materials sub-industry as of 2021.
COTEKE also applies ERP, WES, WMS, APS and MDIS system capabilities to connect orders, scheduling, equipment ex*****on, warehousing and data management—providing the data foundation that carbon footprint accounting requires. Its smart loading equipment, warehouse systems and AGVs extend this capability from production into logistics.
COTEKE has served Russia, India, Uzbekistan, Mongolia, Indonesia, Saudi Arabia and more than 20 countries and regions, with 1000+ building materials, to***co, food and logistics enterprises served.

Provincial-level industrial planning is now naming specific building-material product categories—and that changes how in...
18/08/2026

Provincial-level industrial planning is now naming specific building-material product categories—and that changes how insulation manufacturers should read policy signals.​
On August 5, 2026, Fujian Province released its "15th Five-Year Plan" Action Plan for High-Quality Development of the New Materials Industry Cluster. The plan sets a target of exceeding RMB 900 billion in new-materials cluster output by 2030, cultivating more than 15 enterprises with output value above RMB 10 billion and approximately 100 provincial-level industrial leading enterprises.
Notably, within the advanced inorganic non-metallic materials category, the plan explicitly lists structure-insulation-decoration integrated boards, low-carbon cement and ultra-high purity graphite as green building-material priorities.
For insulation and building-material manufacturers, the practical reading is this: when a product category enters provincial planning, capacity expansion, project investment and application promotion usually follow. But new capacity is only deliverable when downstream processes—stacking, packaging and palletizing—keep pace with upstream forming capacity.
Tianjin Coteke Intelligent Equipment Co., Ltd. provides packaging automation equipment for insulation building-material production lines, covering stacking, compression, packaging and palletizing processes for rock wool, glass wool, ceramic fiber, rubber foam, XPS boards, integrated boards and waterproofing membranes. COTEKE's market share in the automation product market of the thermal insulation building materials sub-industry is more than 70% as of 2021.
The plan also proposes exploring an "AI + materials" manufacturing paradigm. On the production side, this reinforces the need to connect equipment with information systems. COTEKE applies ERP, WES, WMS, APS and MDIS capabilities to coordinate orders, scheduling, equipment ex*****on, warehousing and data management.
COTEKE has served Russia, India, Uzbekistan, Mongolia, Indonesia, Saudi Arabia and more than 20 countries and regions, with 1000+ building materials, to***co, food and logistics enterprises served.

ZC TL1836 Automatic Board & Strip Stacking + Packaging MachineOne machine. Two functions. Designed for constrained produ...
14/08/2026

ZC TL1836 Automatic Board & Strip Stacking + Packaging Machine
One machine. Two functions. Designed for constrained production spaces.
Applicable scenario
Rock wool & glass wool lines at 5-6 tons/hour
Stacking speed
13-36 boards/min
Strip stacking size
​(900-1200) × (1100-1260) × (30-200)mm
Maximum stack height
500mm
Utility requirements
• Power: 100kW
• Air consumption: 1m³/min @ 0.6MPa
• Power supply: 380V, 50Hz/60Hz
Key design features
• Upward stacking mechanism — handles both boards and strips
• Servo control + encoder-based positioning
• Low-drop alignment device for fibrous materials
• PLC and touchscreen HMI
• Optional special-shaped board handling system
• Site-adaptive layout configuration
COTEKE supports insulation-material production lines with stacking, compression, packaging and palletizing equipment. With 80+ intellectual property rights, the company has served projects in more than 20 countries and regions.

Higher-output insulation lines require stacking capacity to be engineered in boards per minute—not evaluated only by ton...
11/08/2026

Higher-output insulation lines require stacking capacity to be engineered in boards per minute—not evaluated only by tons per hour.​
For rock wool production lines above 5 tons/hour, the stacking stage must coordinate incoming board flow, stack formation, product alignment, specification changeovers and downstream packaging capacity. Converting line output into the actual board rate requires product dimensions, thickness, density and individual board weight.
The COTEKE ZC/D24 Automatic Board Stacker uses a dual-station configuration for high-speed stacking applications. It is designed for glass wool boards, rock wool boards, XPS boards, polyurethane boards and phenolic boards within the specified product range.
Its control configuration combines PLC programming, a touchscreen HMI, servo motors, a servo control system and encoder-based control. An automatic alignment device supports board positioning during stacking, while an optional special-shaped board handling system can be evaluated for non-standard products.
Key technical data

Applicable production scenario: Rock wool lines above 5 tons/hour
Stacking size: ​(600-1200) × (1200-1300) × (30-200)mm
Maximum stacking height: 500mm
Stacking speed: 20-24 boards/min
Power supply: 380V, 50Hz/60Hz, three-phase five-wire system
Power: 25KW
Air consumption: 1.0m³/min
Machine dimensions: 20000 × 7000 × 2300mm

The stated stacking speed should be matched with the number of boards per stack, downstream packaging cycle, buffer capacity and conveyor flow. For multi-product lines, specification recipes should also remain consistent across stacking, compression, wrapping and palletizing equipment.
Tianjin Coteke Intelligent Equipment Co., Ltd. provides automation equipment for stacking, compression, packaging and palletizing processes in insulation-material production lines. COTEKE has served Russia, India, Uzbekistan, Mongolia, Indonesia, Saudi Arabia and more than 20 countries and regions, with 1000+ building materials, to***co, food and logistics enterprises served.
Its market share in the automation product market of the thermal insulation building materials sub-industry is more than 70% as of 2021. COTEKE also has ERP, WES, WMS, APS and MDIS capabilities to support production, ex*****on, planning and warehouse coordination.

As insulation-product specifications diversify, slitting equipment must coordinate continuous processing with faster rec...
11/08/2026

As insulation-product specifications diversify, slitting equipment must coordinate continuous processing with faster recipe changeovers.​
For rock wool and glass wool manufacturers, the slitting stage connects incoming board production with downstream strip handling and packaging. Equipment selection should therefore consider material characteristics, incoming dimensions, target strip specifications, line speed, changeover requirements and interfaces with downstream equipment.
The COTEKE ZC/CTJ1200 Automatic Slitting Machine is designed for continuous slitting of rock wool boards and glass wool boards. It uses PLC programmable control technology and a touchscreen HMI. Its front and rear workstation design supports specification changeovers for multi-product production requirements.
Key technical data

Slitting specification: Continuous × (1100-2000) × (75-157mm)​
Slitting speed: 3-18m/min
Power supply: 380V, 50Hz/60Hz, three-phase five-wire system
Power: 25kW
Air consumption: 0.1m³/min
Machine dimensions: 4000 × 2300 × 1800mm

Because the supplied specification does not define the dimensional orientation of each value, final equipment configuration should be based on product drawings, physical samples and required strip dimensions. Actual operating speed should also be matched with material density, thickness, surface condition and downstream stacking and packaging capacity.
For overseas projects, 50Hz/60Hz compatibility is only one electrical consideration. Voltage, grounding, local electrical requirements, maintenance access and production-line signal interfaces must also be confirmed during engineering.
Tianjin Coteke Intelligent Equipment Co., Ltd. provides automation equipment for stacking, compression, packaging and palletizing processes in insulation-material production lines. COTEKE has served Russia, India, Uzbekistan, Mongolia, Indonesia, Saudi Arabia and more than 20 countries and regions, with 1000+ building materials, to***co, food and logistics enterprises served.
Its market share in the automation product market of the thermal insulation building materials sub-industry is more than 70% as of 2021. COTEKE also has ERP, WES, WMS, APS and MDIS system capabilities for production, ex*****on, warehousing and planning coordination.

Compression is a key packaging-stage process for flexible insulation materials—but consistent output depends on more tha...
10/08/2026

Compression is a key packaging-stage process for flexible insulation materials—but consistent output depends on more than compression force alone.​
For glass wool, rubber foam and ceramic fiber products, equipment selection must account for product dimensions, thickness, rebound characteristics, package configuration, line throughput and downstream wrapping requirements.
The COTEKE YS600 Compression Machine is designed for the packaging stage of these insulation materials. Its automated control system organizes the compression process for extended production operations. The machine also includes motor overheat protection: when an abnormal motor condition is detected, the equipment triggers an alarm to reduce the risk of continued abnormal operation and production interruption.
Safety guards and reasonably positioned emergency-stop buttons support operation and intervention requirements at the compression station.
Key technical data

Individual product size: 600/935 × 1200 × 30-117mm
Compressed size: 600/935 × 1200 × 600mm
Compression speed: 1-1.5 packs/min/machine
Power supply: 380V, three-phase five-wire system
Total power consumption: approximately 5kW
Air consumption: approximately 250L/min

For line planning, the specified output should be matched with upstream feeding and downstream bagging, sealing, shrink-wrapping or palletizing processes. Product rebound, discharge direction, conveyor height and the time between compression and package restraint should also be verified during project engineering.
Tianjin Coteke Intelligent Equipment Co., Ltd. provides automation equipment for stacking, compression, packaging and palletizing processes in insulation-material production lines. COTEKE has served Russia, India, Uzbekistan, Mongolia, Indonesia, Saudi Arabia and more than 20 countries and regions, with a customer base of 1000+ building materials, to***co, food and logistics enterprises.
Its market share in the automation product market of the thermal insulation building materials sub-industry is more than 70% as of 2021. The company also has ERP, WES, WMS, APS and MDIS system capabilities for broader production and logistics coordination.

Insulation board production is becoming more specification-driven—and the stacking process must adapt accordingly.​Rock ...
10/08/2026

Insulation board production is becoming more specification-driven—and the stacking process must adapt accordingly.​
Rock wool boards, glass wool boards, XPS boards and polyurethane boards differ in dimensions, thickness, surface condition and downstream packaging requirements. When multiple specifications share one line, the stacking stage must coordinate product alignment, layer formation, recipe adjustment and the handoff to packaging.
The COTEKE ZC/D11 Automatic Board Stacker uses a fully automatic drop-stacking process. Its control architecture combines PLC programming, a touchscreen HMI, servo motors, a servo control system and encoder-based control. An automatic alignment device organizes incoming boards before and during stacking, while an optional special-shaped board handling system can be evaluated for non-standard products.
Key technical data

Stacking size: ​(600-1200) × (1200-1300) × (30-200)mm
Maximum stacking height: 500mm
Stacking speed: 8-11 boards/min
Power supply: 380V, 50Hz/60Hz, three-phase five-wire system
Power: 5KW
Air consumption: 0.3m³/min
Machine dimensions: 8000 × 3000 × 1600mm

For overseas projects, electrical frequency is only one part of equipment adaptation. Manufacturers should also verify voltage, grounding, local electrical requirements, maintenance clearances, safety protection and interfaces with upstream conveying and downstream packaging.
Tianjin Coteke Intelligent Equipment Co., Ltd. provides automation equipment for stacking, compression, packaging and palletizing processes in insulation-material production lines. COTEKE has served Russia, India, Uzbekistan, Mongolia, Indonesia, Saudi Arabia and more than 20 countries and regions, with a customer base of 1000+ building materials, to***co, food and logistics enterprises.
Its market share in the automation product market of the thermal insulation building materials sub-industry is more than 70% as of 2021. This application base supports project planning for different insulation-board specifications and packaging-line configurations.

Global infrastructure growth is creating region-specific requirements for insulation materials—and production readiness ...
07/08/2026

Global infrastructure growth is creating region-specific requirements for insulation materials—and production readiness must extend beyond material capacity.​
Across Southeast Asia, new manufacturing plants, cold-chain warehouses, chemical facilities and renewable-energy projects are increasing the need for insulation solutions suited to hot and humid environments. In the Middle East and Central Asia, energy and industrial infrastructure requires materials and packaging formats that can withstand demanding project and transportation conditions. In Eastern Europe and Latin America, renovation projects are creating more diversified product specifications and batch requirements.
However, fire classifications and energy-efficiency requirements are not globally uniform. Manufacturers must verify the applicable test methods, certification rules, labeling requirements and contract specifications for each destination market.
For insulation-material producers, export readiness therefore involves several connected capabilities:

Flexible handling of product specifications
Compression and packaging aligned with shipping conditions
Palletizing rules matched to storage and container loading
Production, warehouse and logistics data coordination
Equipment configuration based on local power and factory conditions

Tianjin Coteke Intelligent Equipment Co., Ltd. provides automation equipment for stacking, compression, packaging and palletizing processes for rock wool, glass wool, ceramic fiber, rubber foam, XPS boards, integrated boards and waterproofing membranes.
COTEKE can also connect packaging-end processes with smart warehousing, AGVs and automated loading solutions, supported by ERP, WES, WMS, APS and MDIS capabilities.
The company has served Russia, India, Uzbekistan, Mongolia, Indonesia, Saudi Arabia and more than 20 countries and regions, with a customer base of 1000+ building materials, to***co, food and logistics enterprises. Its market share in the automation product market of the thermal insulation building materials sub-industry is more than 70% as of 2021.

Address

Huanhe South Road, Airport Economic Zone, Dongli District， No. 239
Tianjin

Opening Hours

Monday 09:00 - 17:00
Tuesday 09:00 - 17:00
Wednesday 09:00 - 17:00
Thursday 09:00 - 17:00
Friday 09:00 - 17:00

Website

Alerts

Be the first to know and let us send you an email when Coteke group posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category