Huatao Group-paper machine cloth department

06/02/2025

27/09/2024

Chemical Process Pumps achieve the same effect as 3298Chemical Process

• Capacities to 1,500 GPM (340 m³/h)
• Heads to 850 feet (259m)
• Temperatures to 250° F (121° C)
• Pressures to 375 PSIG (2586 kPa)

Applicable media:
Acids: sulfuric acid, hydrochloric acid, nitric acid, hydrofluoric acid, phosphoric acid, perchloric acid, sulfurous acid, hydrobromic acid, acetic acid, oxalic acid, aqua regia, etc.
Alkali: potassium hydroxide, sodium hydroxide, lithium hydroxide, ammonia, hydrogen peroxide, etc. Organic solvents: alcohols, aldehydes, ethers, lipids, benzene, etc.
Salts: sodium hypochlorite, sodium chloride, copper sulfate, ferrous chloride, potassium permanganate, sodium bicarbonate, sodium sulfate, etc.

wa.me/8613383110325
[email protected]

07/08/2024

Why must the mold for molded products be a mesh mold ？

During the process of pulp molded products, it takes multiple times to enter the mold to complete the product manufacturing process, because products are molded on a single convex or concave mold, and after molding, they must be transferred in the mold cavity after the convex and concave molds are closed. The wet paper blank transferred to the final mold is molded after pressurization and heating in the final .

Therefore, pulp molding molds are divided into molding molds, final molds, shaping molds, transfer molds and die-cutting molds. There are two types of molding processes, one is adsorption molding, and the other is compression molding. Compression molding molds are somewhat similar to rubber and plastic molds, and adsorption molding molds are more special and complex.

Moreover, the molding of pulp molded products is very different from rubber and plastic products molded in the mold cavity. The slurry used in the molding of pulp molded products is an aqueous solution containing only about 10% of . Most of the water must be ensured to flow away, so the molding mold for pulp molded products must be a mesh mold.
https://www.sjzpulpmolding.com/

23/07/2024

Stainless steel
Uses neodymium iron boron (NaFeB) strong magnet, surface magnetic induction intensity 380-450GS (Gauss) never demagnetizes during use, can transport media with specific gravity greater than 1.2 and less than 2, long life, more stable
range: 3.6-100T/h. Head range: 15-80m.
Applicable media: solution, , intermediates, etc.
Features: ultra-long life, maintenance-free. Special configurations can be customized for different working conditions.

22/03/2024

EPE foam pipe、stick, profile is a kind of new-type foam material and it is widely used in the jacket of air conditioner,heat insulation,toy guardrail,recreation places etc.Due to its high foaming ratio,good elasticity and insulation.As a kind of new type foam filling and stem and ornament material.

03/03/2024

Explosion-proof acid and alkali resistant self-priming pumps

23/02/2024

Sale egg tray equipment and pulp model,whatsapp :008613383110325

04/02/2024

In 2020, HUATAO began to get involved in the field of pulp molding equipment. While closely following the trend of green environmental protection and low energy consumption, HUATAO is not only committed to manufacturing and selling pulp molding machines with diverse output, stable performance and reasonable price, but also helping them turn waste paper into wealth.

26/12/2023

Sanitary grade quick-install butterfly valve
Precision cast from stainless steel 304, not easy to rust, acid and alkali resistant
Dairy products, food, pharmaceuticals, beer and cosmetics can be used more safely

Contact us today to discuss your requirements and let us provide you with a tailored solution.

21/12/2023

Powerful sewage pump
Used for septic tanks in farms and river sludge

Using quenched gears, wear-resistant and long life
With cleaning outlet, easy to use

For Christmas discount