Crysound

Crysound Global leading provider of acoustic testing solutions with more than 25 years continuous efforts.

We’re heading to Testing Expo China – Automotive 2026! 🚗From August 26–28, CRYSOUND will be at the Shanghai World Expo E...
21/08/2026

We’re heading to Testing Expo China – Automotive 2026! 🚗

From August 26–28, CRYSOUND will be at the Shanghai World Expo Exhibition & Convention Center, Booth 5018.

Meet our team and explore our automotive acoustic and vibration testing solutions—from high-performance measurement microphones and multi-channel data acquisition to flexible analysis software—designed to help engineers capture reliable data and bring better vehicles to market.
Whether you are working on NVH development, component validation or full-vehicle testing, we would love to discuss your measurement challenges.

📍 Booth 5018
📅 August 26–28, 2026
📌 Shanghai World Expo Exhibition & Convention Center, Shanghai, China

See you in Shanghai!

Would you put a measurement microphone through an air-fryer test?audioXpress did.The CRYSOUND CRY3213 NVH Measurement Mi...
20/08/2026

Would you put a measurement microphone through an air-fryer test?
audioXpress did.

The CRYSOUND CRY3213 NVH Measurement Microphone was subjected to a 10-minute cycle at 250°F / 121°C, with sound levels reaching approximately 104 dBSPL.
After the test, its sensitivity measured 94.3 dB at high temperature and 94.4 dB at room temperature—with no meaningful change.

Reviewer Stuart Yaniger summed it up perfectly:
“I tortured it and it held up effortlessly.”

Designed for demanding real-world NVH applications, the CRY3213 offers IP67 protection and reliable operation from −50°C to +125°C, making it suitable for engine-bay testing, road testing, outdoor measurements, and other challenging environments.

See the full September issue of audioXpress:
https://na2.hubs.ly/H07j13q0
Explore the CRY3213 NVH Measurement Microphone:
https://na2.hubs.ly/H07j0y60

CRY3018 VS GRAS 42AB — what do the actual measurements show?In an independent audioXpress hands-on review, the two sound...
19/08/2026

CRY3018 VS GRAS 42AB — what do the actual measurements show?

In an independent audioXpress hands-on review, the two sound calibrators were tested side by side across four different microphone configurations.

The reported differences ranged from only 0.00 to 0.04 dB.
This comparison is not about declaring a winner. It is about putting the measurement results next to each other and allowing the data to speak for itself.

The CRYSOUND CRY3018 is a portable IEC 60942:2017 Class 1 sound calibrator supporting 94/114 dB sound pressure levels and 250/1000 Hz calibration frequencies. Its integrated feedback system and environmental compensation help maintain stable output across changing test conditions.

See the test data in the image and explore the full September issue of audioXpress:
https://na2.hubs.ly/H07hVsR0
Discover the CRY3018 Sound Calibrator:
https://na2.hubs.ly/H07h_xx0

Recommend CRYSOUND. Earn up to 5% commission. 💰Four CRYSOUND products are now available for direct purchase through our ...
18/08/2026

Recommend CRYSOUND. Earn up to 5% commission. 💰
Four CRYSOUND products are now available for direct purchase through our official website—and are included in the CRYSOUND Affiliate Program:
🔹 CRY8024 SonoCam Pocket Acoustic Camera
🔹 CRY2831 Class 2 Sound Level Meter
🔹 CRY2832-2 Lite Sound Level Meter
🔹 CRY2832-2 Pro Sound Level Meter

The program is free and easy to join. Simply register, choose a product to promote, share your unique referral link, and earn up to 5% commission from successful referrals.

Your commission can cover qualifying purchases from any of these four products—not only the product you originally shared.

👉 Join the CRYSOUND Affiliate Program:
https://na2.hubs.ly/H07fYfk0

We recently shared audioXpress’s independent review of CRYSOUND measurement microphones and the CRY3018 sound calibrator...
18/08/2026

We recently shared audioXpress’s independent review of CRYSOUND measurement microphones and the CRY3018 sound calibrator.

For anyone who wants to go beyond the headline, we’ve now brought the test setup, charts, and main findings together in one article.

The review examines the CRY3018, CRY3203-S01, and CRY3213 NVH across calibration accuracy, frequency response, self-noise, environmental stability, and ruggedness.

See the test data and full review breakdown:
https://na2.hubs.ly/H07fZm20

14/08/2026

It’s Friday! Maybe we can do something a little more fun. 😸🔊
Let’s brainstorm: What can our SonoCam Pocket do?
Find your missing cat by its meow? 🐱
Why not?

And some ideas aren’t even hypothetical — we’ve actually received inquiries about using acoustic imaging to locate cicadas, and even for birdwatching. 🐦
Imagine hearing a bird nearby but not being able to spot it. Could an acoustic camera help point you in the right direction?

So… what else could you use a pocket acoustic camera for?
Drop us your wildest ideas. We’ll keep testing, experimenting, and sharing more interesting cases in the future. 👀

🛒 Want to try your own ideas? SonoCam Pocket is available to order directly online:
https://na2.hubs.ly/H077PnX0
📩 Questions or project inquiries: [email protected]

Great to see CRYSOUND featured in the September 2026 issue of audioXpress!The review was conducted by Stuart Yaniger, a ...
13/08/2026

Great to see CRYSOUND featured in the September 2026 issue of audioXpress!

The review was conducted by Stuart Yaniger, a long-time audioXpress contributor with nearly five decades of experience designing and building audio equipment.
He put our CRY3018 Microphone Calibrator, CRY3203-S01 Measurement Microphone, and CRY3213 NVH Measurement Microphone through a series of hands-on tests.

A few highlights:
• CRY3018 vs. GRAS 42AB: only 0.00–0.04 dB difference across the reported comparisons
• Both CRYSOUND microphones showed very flat frequency response, closely matching their individual calibration data
• CRY3213 NVH remained stable even through demanding harsh-environment testing

After the tests, Stuart described the products as serious, superbly built and rugged — competitive with, or even better than, comparable products from some long-established professional brands.

Thank you to Stuart and audioXpress for putting CRYSOUND to the test!
Read more:
https://na2.hubs.ly/H079v9G0

12/08/2026

What can SonoCam Pocket do? #1 👀🔊
Track a moving drone’s sound source. 🎯

We took the CRYSOUND SonoCam Pocket outside for a quick test.
As the drone moves across the sky, the acoustic hotspot follows its sound source in real time — turning something we hear into something we can actually see.
A simple test, but a pretty cool way to see acoustic imaging in action.

🛒 Want to try it yourself? SonoCam Pocket is available to order directly online:
https://na2.hubs.ly/H077LLv0
📩 Questions or project inquiries: [email protected]

Day 2 at INTER-NOISE 2026 is almost a wrap — and tomorrow is the final day! 👋It’s been great meeting so many acoustics a...
11/08/2026

Day 2 at INTER-NOISE 2026 is almost a wrap — and tomorrow is the final day! 👋

It’s been great meeting so many acoustics and noise control professionals, exchanging ideas, and demonstrating our latest solutions in acoustic imaging, sound & vibration data acquisition, measurement microphones, and acoustic testing software.

If you haven’t stopped by yet, tomorrow is your last chance to visit the CRYSOUND team at Booth #2 and see our systems in action.

Come say hi — we’d love to meet you before the show wraps up!
📍 INTER-NOISE 2026
📌 Booth #2

🇦🇺 CRYSOUND is heading to INTER-NOISE 2026 in Adelaide!We’re excited to join acoustic engineers, researchers, and indust...
07/08/2026

🇦🇺 CRYSOUND is heading to INTER-NOISE 2026 in Adelaide!

We’re excited to join acoustic engineers, researchers, and industry professionals from around the world at INTER-NOISE 2026.
Visit us at Booth #2 and explore CRYSOUND’s latest solutions for sound, vibration, and noise measurement, including:
🔹 SonoDAQ multi-channel data acquisition systems for synchronized acoustic and vibration measurement
🔹 OpenTest for acquisition, FFT, octave analysis, sound power measurement, automated workflows, and reporting
🔹 Precision measurement microphones & Class 1 sound level meters for laboratory and field measurements
🔹 Acoustic imaging cameras for real-time noise source visualization and localization
From multi-channel acquisition and NVH testing to sound power measurement and noise source identification, come and see how CRYSOUND helps engineers Measure Sound Better.

📍 Adelaide Convention Centre
📅 August 10–12, 2026
📌 Booth #2

If you’re attending INTER-NOISE, stop by and meet our team. We’d love to talk about your acoustic measurement challenges.
See you in Adelaide! 👋

Address

No. 10, Xianqiao Road, Zhongtai Street, Yuhang District
Hangzhou
311122

Telephone

+8657188225198

Website

Alerts

Be the first to know and let us send you an email when Crysound posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Crysound:

Shortcuts

Share

Category