Jiuying Sheet Metal Equipment

04/06/2026

⚙️ Precision spinning, fully automated.

Meet our cone head forming & dish end spinning machine — built to handle both regular and irregular can flanging with consistent quality.

🔧 Advanced PLC + microelectronics control
🔧 Yaskawa servo motor + planetary reduction (stepless speed regulation)
🔧 Screw jack lifting — automatically tightens the head
🔧 Sensor + direct digital + PLC control for full‑auto spinning
🔧 Smooth formed shape, reliable quality, high efficiency

Ideal for storage tank manufacturers and industrial fabricators handling automated can ri***ng.

💬 Customization available. Message us your specs for a free evaluation!

🔗 https://buff.ly/DwVz5QT

28/05/2026

🏭 From 5mm to 12mm thick, from 600mm to 6000mm long — the JY Series cone head/dish end flanging machine covers it all.

✅ Smooth surface finishing, less wheel marks
✅ Good roundness, minimal thinning
✅ High productivity with stable performance
✅ 15+ models ready for your specs

Ideal for pressure vessels, boilers, storage tanks, and industrial equipment manufacturing.

👇 Message us for a free process test with your material!
🔗 https://buff.ly/ubCoGWI

Head-shaped seal molding desk (Matte desk) Separate hand-operated seal molding desk (Matte desk) Japanese automatic seal mold

21/05/2026

🚀 Upgrade your tank head production with our PLC-controlled hydraulic forming machine.
✅ Round, cone, flat-bottom, or special-shaped heads
✅ Manual & fully automatic models available
✅ Max thickness 50mm · Max diameter 10000mm
✅ Low wheel marks, high roundness, stable hydraulic system

Perfect for pressure vessels, food equipment, boilers, and chemical storage tanks.
👇 Send us a message for a free process test with your material!
🔗

Jiuying dished end forming machine, providing professional solutions for can production equipment。You can contact us by phone/ whatsapp:0086-13322202758

14/05/2026

Stamping vs. Spinning: Why Modern Head Forming Chooses the Latter
For decades, stamping was the default way to form dished ends. But as pressure vessel design evolves, so should your manufacturing method.

3 Reasons Spinning (Flanging) Wins:

1. Lower Tooling Cost
Stamping requires matched male/female dies—expensive and inflexible. Spinning uses simple, interchangeable rollers. Switch designs without breaking the bank.

2. No Wrinkling on Thin Walls
For large-diameter, thin-walled heads (high radius/thickness ratio), stamping often causes longitudinal wrinkles. Spinning's gradual, localized forming eliminates this.

3. Size Flexibility
Stamping presses have physical limits. Spinning machines like ours can form heads up to 10 meters in diameter—ideal for today's large-scale reactors and storage tanks.

The Bottom Line:
If you're making heads from 600mm to 10,000mm, thickness 3-50mm, spinning isn't just an alternative—it's the superior choice.

Want to discuss which process fits your production? Let's talk.

🌐 https://buff.ly/m8PQF9j

Jiuying dished end forming machine, providing professional solutions for can production equipment。You can contact us by phone/ whatsapp:0086-13322202758

07/05/2026

Forming Heads Up to 10 Meters? We Built a Machine for That.
When your project demands large pressure vessels or storage tanks, you need equipment that can handle massive scale with precision.

Introducing our Hydraulic Heavy Head Flanging Machine—engineered for the toughest jobs:

Massive Capacity:
✅ Diameter Range: 600mm to 10,000mm (yes, up to 10 meters!)
✅ Thickness Range: 3mm to 50mm (up to 80mm for specific models)
✅ Shapes: Ellipsoidal, dished, conical, spherical, flat—all on one machine

Why It's Different:
⚙️ Spinning, Not Stamping: Lower mold costs, no wrinkling on thin walls, ideal for small batches
⚙️ Fast: Typical forming time: just 7-10 minutes per head
⚙️ Built Tough: Closed-frame U-shaped structure, vibration-aged welding for maximum rigidity
⚙️ Smart Control: Japanese Omron PLC for precise, repeatable results

From food processing equipment to chemical reactors—if it needs a head, we can help you make it.

🔗 Technical specs & inquiry: https://buff.ly/RtVjNid

1. Advantages of disc spinning machineDisc-end spinning presses have many advantages compared with stamping forming. The equi

30/04/2026

Case Study: How a Foshan Factory Cut Thin Plate Scrap by 80%
Processing stainless steel under 2mm thick? You know the pain: deep wheel marks, edge deformation, and scrap rates that eat into profits.

A Foshan kitchenware manufacturer faced exactly this—until they tested our Jy0160 Manual Head Former (designed for max 1mm thickness).

The Results After 8 Months:
🔹 Scrap Rate: Down from 8-10% to ≤1.5% ↓80%
🔹 Production Time: From 32 min to 16 min per piece (polishing eliminated!) ↓50%
🔹 Workforce: 3 polishers reassigned to assembly
🔹 Training: New operators ready in 3 days (instead of 3 months)

The secret? Using a machine that operates in its power "sweet spot" for thin materials, not an oversized one that causes damage.

👉 Read the full story: https://buff.ly/BOat0IW
👉 Explore the Jy0160: https://buff.ly/m8PQF9j

Chinese kitchenware factory uses Jy0160 to make 0.8-1.2mm stainless heads: 18 min/piece, scrap down 81%, eliminated polishing team. 220V ready. Read the full story.

23/04/2026

A Foshan factory cut thin plate scrap from 10% to 1.5% and eliminated polishing with our Jy0160 Head Former.

⏱️ 16 min/piece (was 32 min)
👨‍🏭 3-day training (was 3 months)

The right machine changes everything.

Details: https://buff.ly/BOat0IW

Chinese kitchenware factory uses Jy0160 to make 0.8-1.2mm stainless heads: 18 min/piece, scrap down 81%, eliminated polishing team. 220V ready. Read the full story.

16/04/2026

Since 2015, Dalian Jiuying Machinery has been committed to one mission: providing professional dished end forming machines and solutions to manufacturers worldwide.

Rooted in the core values of Integrity, Innovation, and Service, we don’t just build machines; we build long-term partnerships. Our team combines hard work with a realistic approach to continuously improve our technology and service standards.

From standard heads to complex custom projects, we’re here to equip your shop with the precision tools you need.

👉 Explore our range: https://buff.ly/qn0kYHG

09/04/2026

Processing stainless steel under 2mm thick? Our Jy0160 Manual Head Former is engineered for that exact “sweet spot.” A recent customer in Foshan proved it:
🔹 Before: 8-10% scrap rate, deep wheel marks requiring full-time polishers.
🔹 With Jy0160: Scrap rate ≤1.5%, surface so smooth it’s polish-free.
🔹 Time Saved: From 32 minutes to just 16 minutes per piece.

The result? They cut costs, reassigned 3 workers, and trained new staff in 3 days instead of 3 months.

Is your current machine the right fit for thin plates?
👉 Read the full story: https://buff.ly/m7gxwsw
👉 See the machine: https://buff.ly/qn0kYHG

02/04/2026

What makes a Jiuying head former different? It’s the engineering philosophy behind every machine.
🔧 Right-Sized Power: We match the machine to the material. Using a massive machine for thin plates creates problems. Our Jy series (like the Jy0160) is designed to operate in its power “sweet spot” for ≤2mm materials, minimizing inertia damage.
🔧 Built to Last: Robust all-steel frames and high-quality components ensure stability at speeds of 40-50 cycles/min.
🔧 Certified Quality: All our key machines carry CE certification, meeting rigorous European safety and environmental standards.

From roundness gaps under 0.2mm to thinning rates well below industry limits, we engineer for results you can measure.

📏 Check our technical specs: https://buff.ly/qn0kYHG

Jiuying dished end forming machine, providing professional solutions for can production equipment。You can contact us by phone/ whatsapp:0086-13322202758