TMTeck Instrument Co., Ltd.

TMTeck Instrument Co., Ltd. Contact information, map and directions, contact form, opening hours, services, ratings, photos, videos and announcements from TMTeck Instrument Co., Ltd., Beiyuan.

NDT instruments design and making: hardness tester , ultrasonic thickness gauge , coating thickness gauge , ultrasonic flaw detector, ultrasonic probes and cables, surface roughness tester and etc.

TMTECK Eddy Current Electrical Conductivity Meter TMD-102 – Key Features Highlighted πŸ›«πŸ“Šβœ… Aviation industry standard – Op...
29/05/2026

TMTECK Eddy Current Electrical Conductivity Meter TMD-102 – Key Features Highlighted πŸ›«πŸ“Š

βœ… Aviation industry standard – Operates at 60 KHz /240KHz for reliable testing
βœ… Dual readout units – Choose %IACS or MS/m instantly
βœ… Big typeface + backlight – Perfect for low-light conditions πŸŒ™
βœ… High-performance battery – Longer running time, compact & portable 🧲
βœ… Probe replacement easily – No need to recalibrate πŸ”§
βœ… 1000 data storage – Ideal for fieldwork & record keeping πŸ“

🎯 The smart, field-ready conductivity meter you can trust.

πŸ”¬ Master your NDT calibration with precision and confidence.From setup to verification β€” every scan starts right. πŸ“Šβœ…πŸ“ Re...
27/05/2026

πŸ”¬ Master your NDT calibration with precision and confidence.

From setup to verification β€” every scan starts right. πŸ“Šβœ…

πŸ“ Ready for:
βœ”οΈ Angle beam
βœ”οΈ Sensitivity setting
βœ”οΈ DAC / distance checks

Small tool, big impact on inspection quality. πŸŽ―πŸ› οΈ

πŸ”§ V3 TEST BLOCK – Ready for the toughest NDT jobs. βœ…ο»ΏπŸ› οΈ Materials: 1018 / Stainless Steel / Aluminum ο»ΏπŸ“ˆ Use cases: UT, T...
21/05/2026

πŸ”§ V3 TEST BLOCK – Ready for the toughest NDT jobs. βœ…
ο»Ώ
πŸ› οΈ Materials: 1018 / Stainless Steel / Aluminum
ο»Ώ
πŸ“ˆ Use cases: UT, TOFD, Phased Array, Calibration
ο»Ώ
Consistent results. Every time. πŸ“Š
ο»Ώ

πŸ”Š Meet the V2 Test Block β€” your reliable partner for precise NDT calibration.βœ… Thickness options: 12.5mm / 20mm / 25mmβœ… ...
18/05/2026

πŸ”Š Meet the V2 Test Block β€” your reliable partner for precise NDT calibration.

βœ… Thickness options: 12.5mm / 20mm / 25mm
βœ… Hole diameters: 1.5mm & 5mm
βœ… Materials available: 1018 Steel | Stainless | Aluminum

Perfect for flaw detection, equipment setup, and repeatable accuracy πŸ”§

πŸ“¦ Ready for lab or field use.

πŸ”¬βœ¨ V1 TEST BLOCK – Precision you can trust.Different materials, same high standard.🧩 Available in:πŸ”© 1018 Steelβš™οΈ 304 Sta...
12/05/2026

πŸ”¬βœ¨ V1 TEST BLOCK – Precision you can trust.

Different materials, same high standard.

🧩 Available in:
πŸ”© 1018 Steel
βš™οΈ 304 Stainless
πŸ›‘οΈ 316 Stainless
πŸͺž Aluminum
& more on request

Perfect for calibration, training, and procedure validation.🎯

08/05/2026

Meet the phased array probe & scanner from TMTECK – engineered specifically to be compatible with Olympus machines for corrosion detection.
ο»Ώ
βœ… Match with Olympus instruments
βœ… Precise PA scans for corrosion mapping
βœ… Lightweight, rugged, and field-ready
ο»Ώ
πŸ‘‰ Watch the scanner in action πŸ‘‰
ο»Ώ

πŸ” Unlock sharper, more reliable inspections with TMTECK’s Angle Beam Probe.βœ”οΈ Wide bandwidth – 45-55% at -6dB for clear ...
07/05/2026

πŸ” Unlock sharper, more reliable inspections with TMTECK’s Angle Beam Probe.

βœ”οΈ Wide bandwidth – 45-55% at -6dB for clear signal resolution
βœ”οΈ Superior sensitivity – 6-8dB better than KK – detect smaller flaws with confidence
βœ”οΈ Standard Lemo 00 equivalent connector – easy integration into your existing setup

Engineered for performance. Built for precision.

πŸ“© DM us for specs & pricing!
E: [email protected]

24/04/2026

Meet TC-200 – the pocket-sized crack detector that works through coatings. No grinding. No mess. Just results.βœ…
ο»Ώ
⚑ 1 ft weld in 10 sec
🎯 Finds crack tip + depth estimate
πŸ”‹ 14h battery
πŸ’§ IP65 water resistant
ο»Ώ
Stop prepping. Start finding.
ο»Ώ

TMTECK TC-200 – Crack Detection. πŸ”βœ… Detects cracks under thick coatingsβœ… No paint or grease removal neededβœ… Finds crack ...
22/04/2026

TMTECK TC-200 – Crack Detection. πŸ”

βœ… Detects cracks under thick coatings
βœ… No paint or grease removal needed
βœ… Finds crack tip & estimates depth
βœ… Fast – scan 1 ft of weld in 10 sec
βœ… Lightweight (0.6 lb) β€’ 14h battery β€’ IP65
βœ… More economical than eddy current & ACFM
βœ… No mess, no consumables, minimal training

🚫 No dye β€’ No mag particle β€’ No surface prep

Smart. Simple. Industrial.

TMRS-710 Integrated Rebar Detector – Smart. Fast. Precision. πŸ”πŸ“ Locate rebars & measure protective layer thicknessπŸ“ Esti...
17/04/2026

TMRS-710 Integrated Rebar Detector – Smart. Fast. Precision. πŸ”

πŸ“ Locate rebars & measure protective layer thickness
πŸ“ Estimate rebar diameter & spacing
πŸ“Š 2D/3D visualization via analysis software
⚑ Multi-coil design for speed & accuracy
πŸ“± USB data transfer + 200k data storage
πŸ”‹ 16h standby, lightweight & portable
πŸ›‘οΈ Shockproof bag + waterproof cover included

Perfect for engineers on-site & off-site πŸ—οΈπŸ§°

Address

Beiyuan
101300

Telephone

+861089445181

Website

https://tmteck-ndt.en.alibaba.com/

Alerts

Be the first to know and let us send you an email when TMTeck Instrument Co., Ltd. posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share