Wie sind die Öffnungszeiten?

Montag 07:15 - 12:00 13:00 - 16:30 Dienstag 07:15 - 12:00 13:00 - 16:30 Mittwoch 07:15 - 12:00 13:00 - 16:30 Donnerstag 07:15 - 12:00 13:00 - 16:30 Freitag 07:15 - 12:00 13:00 - 16:00

Fritz Studer AG

Name: Fritz Studer AG
Address: Thunstrasse 15, Steffisburg, 3612, CH
Telephone: +41334391111

Startseite
Schweiz
Steffisburg
Fritz Studer AG

One of the market and technology leaders in universal, external and internal cylindrical grinding as well as noncircular grinding.

07/09/2026

Internal cylindrical grinding of a 300 mm deep bore with a roundness < 1µm and a cylindricity < 2 µm on the universal internal grinding machine S141.

31/08/2026

A STUDER machine is built for long‑term precision.

But like any high‑accuracy equipment, it only stays that way if it is maintained consistently and at the right intervals.

Maintenance with system means that everything follows a clear and reliable process, from defining the interval to preparing the service and carrying it out on site.

Planning, scheduling, spare parts, and materials are handled in advance so that maintenance can be performed efficiently and without disruption. Our technicians work with structured checklists, inspect all key components, and check the machine geometry to ensure everything remains within specification.

Afterwards, you receive a transparent overview of the actual machine condition and clear recommendations for the next steps.

What this includes:
▪️ Maintenance based on detailed checklists
▪️ Replacement of original wear parts
▪️ Machine geometry checks
▪️ Clear assessment of the machine condition
▪️ Recommendations for preventive measures

For operators, this means fewer unexpected interruptions, better planning of maintenance activities, and stable performance over time, which often comes at lower cost compared to unplanned service work.

24/08/2026

W-axis – Automation for varying workpiece lengths

The W-axis automates the positioning of the tailstock and, depending on the configuration, the in-process measuring head, making it easier to machine part families with varying workpiece lengths. Programmed, precise positioning eliminates manual setup work and supports repeatable grinding processes.

The tailstock position is stored in the grinding program and automatically adapts to the workpiece length. This significantly reduces changeover times and increases flexibility, even for smaller lot sizes and changing production requirements. Repeat orders can be reproduced reliably, while part changes can be carried out with minimal operator intervention.

What this means in practice

▪️ Automatic adaptation to different workpiece lengths
▪️ Reduced setup and changeover times
▪️ Reproducible grinding processes with minimal operator intervention
▪️ Higher flexibility for part families with varying workpiece lengths and different grinding requirements
▪️ Force-controlled clamping with integrated clamping force measurement (W version)

Especially in environments with small and medium-sized production runs, the W-axis helps increase flexibility, reduce setup effort, and support stable, repeatable grinding processes.

17/08/2026

Precision where it matters – Machine manufacturers

Competition from new markets and the demand for increasingly efficient production solutions continue to create new challenges for machine manufacturers.

Typical applications include

▪️ Main spindles
▪️ Workholding components
▪️ Roller bearings
▪️ Motor shafts
▪️ Steel mills
▪️ Pumps
▪️ Printing rolls
▪️ Chain pins
▪️ Eccentrics

To meet these challenges, manufacturers require efficient and cost‑effective production solutions. STUDER supports the manufacture of a wide range of components and tools with innovative grinding solutions tailored to individual requirements.

10/08/2026

**Time passes. Precision remains.**

A cylindrical grinding machine can provide reliable service for many years. But even the best machines are subject to wear over time.

A STUDER rebuild offers the opportunity to extend the machine's service life while restoring the precision that daily production demands. Key components such as guideways, spindles, drives, and Hirth couplings are renewed using original STUDER parts and expertise.

The result: a machine that is ready for many more years of productive operation.

Learn more about our machine overhaul here or find your contactperson: https://www.studer.com/en/customer-care/services/rebuild/

03/08/2026

From nearly one hour to just five minutes

British technology company Domin relies on the STUDER universal external grinding machine S33 to manufacture highly precise hydraulic valve components.

By switching from EDM to cylindrical grinding, machining time for a key valve component was reduced from nearly one hour to just five minutes. At the same time, the S33 delivers the precision required for tolerances in the micron range and supports reliable series production.

Read the full customer story to learn more: https://www.studer.com/en/fritz-studer-ag/news-topics/news-overview/details/news/pioneers-in-hydraulics-how-domin-manufactures-revolutionary-valves-with-the-micrometer-precision-of-the-s33

27/07/2026

Apprenticeship starting in 2027

Applications for our apprenticeship positions are already open.

Whether you're interested in technology, automation, mechanics, or administration, an apprenticeship at STUDER offers the opportunity to gain practical experience, learn from experienced professionals, and become part of an international company with deep roots in the region.

Our vocational training plays an important role at STUDER, 10% of our employees are apprentices and many of them continue to work at the company after they finished their vocational training.

Learn more about what an apprenticeship at STUDER looks like.

👉 Apply now for an apprenticeship starting in 2027: https://www.berufsbildung.studer.com/de/fritz-studer-ag/berufsbildung/freie-lehrstellen/

20/07/2026

1977: Engineers at STUDER released the world’s first CNC cylindrical grinding machine.

Today, manufacturers around the world utilize STUDER grinding machines to manufacture parts that require extreme precision. Manufacturers, such as Ontario Drive and Gear, are moving the world forward one high tolerance part at a time. 🚀

Click the link in the comments to check out their full story, and see the innovative technology we’ll have on display at 2026! ✨

20/07/2026

The Fritz Studer Award is back!

With the Fritz Studer Award 2026, we support graduates whose work contributes to innovation in areas such as machine tool concepts, alternative materials, simulation models, sensor technology, digital solutions, and manufacturing technologies.

The internationally recognized research award is endowed with CHF 10,000 and is open to graduates from European universities and institutes of technology.

📅 Submission deadline: 01 December 2026

We look forward to receiving inspiring research projects and new ideas for the future of manufacturing technology.

More information: https://www.studer.com/de/fritz-studer-ag/events-messen/fritz-studer-award/

15/07/2026

Since it was such a great time, let’s take another look back at the unforgettable UNITED MACHINING SOLUTIONS soccer tournament.🏆

Check out our highlights and see what team spirit can accomplish.

We’d like to congratulate all the teams that participated once again—it was a lot of fun!⚽

Adresse

Thunstrasse 15
Steffisburg
3612

Öffnungszeiten

Montag	07:15 - 12:00
	13:00 - 16:30
Dienstag	07:15 - 12:00
	13:00 - 16:30
Mittwoch	07:15 - 12:00
	13:00 - 16:30
Donnerstag	07:15 - 12:00
	13:00 - 16:30
Freitag	07:15 - 12:00
	13:00 - 16:00

Telefon

+41334391111

Webseite

http://www.studer.com/

Benachrichtigungen

Lassen Sie sich von uns eine E-Mail senden und seien Sie der erste der Neuigkeiten und Aktionen von Fritz Studer AG erfährt. Ihre E-Mail-Adresse wird nicht für andere Zwecke verwendet und Sie können sich jederzeit abmelden.