BMK Bringmann Manufacturing Knowledge

19/06/2024

If you love manufacturing, you have to love hashtag . Make otherwise impossible features, super surfaces - plus the slurping sound 😉

21/05/2024

Life of a workpiece...

The robot does it, so we do not have to do it ;-)Automated loading of a workpiece with our Roth robot automation cell into our Fehlmann Versa 745 machining c...

13/05/2024

Our tool after not 1 or 2, but >7 hours 😁 of roughing Invar 36 (1.3912)!

depth of cut (ap) 16mm
width of cut (ae) 1.2mm
feed per tooth (fz) 0.07mm
cutting speed (vc) 40 m/min

with its almost zero thermal expansion is a great material, but with its high nickel content, it is definitively difficult to machine!

We opted for a low cutting speed, well in the process damping range (see tap test picture), and maximum depth of cut. With Bl**er Swisslube B-Cool MC 660 coolant full on at 70 bar on our Fehlmann Versa 745.

Outstanding tool life on different tools, consistent tool wear... Optimum conditions for automated production. Lowest tool cost.

Thank you, Bl**er Swisslube!

16/01/2024

Check out our new teaser video!

In September 2022, we made a plan on how we wanted BMK to look and how we wanted to work. Now everything we planned back then is running today. Definitely a big step forward! 😎
Not all was smooth, but we have great partners helping us! Thank you all very much!

Fehlmann AG ZEISS Industrial Metrology Blum-Novotest GmbH OPENMIND HAIMER Pokolm Frästechnik GmbH & Co. KG Roth Technik GmbH TBM Automation AG Maschinemarkt Paluch Gremotool

21/03/2023

Vielleicht kennt ja jemand jemanden 😀
Wir suchen eine Polymechnikerin/ einen Polymechaniker und freuen uns über Bewerbungen...

14/03/2023

We will get a brandnew toy next week :-)

06/03/2023

New turning center...

15/02/2023

We now smell better at BMK 😂

06/02/2023

About our system Open Mind hyperMILL

Bernhard Bringmann posted images on LinkedIn

23/01/2023

So far so good...

Bernhard Bringmann posted images on LinkedIn

13/01/2023

If you need parts to be measured on a CMM, let us know!

02/01/2023