JD Poss (welding repairs & fabrication)

JD Poss (welding repairs & fabrication) Need welding? Feel free to Facebook message or text at 519-420-0188. Welding shop. Repairs & fabrication. Steel & aluminum.

Sold $40.
01/10/2020

Sold $40.

Done. These planters ended up a bit quicker than I'd estimated. They average at $400 each.
04/30/2017

Done. These planters ended up a bit quicker than I'd estimated. They average at $400 each.

Planter #1. Done. Three to go. If anyone is interested, these are estimated at $450 each. 4x8x16". Unpainted.
04/28/2017

Planter #1. Done. Three to go. If anyone is interested, these are estimated at $450 each. 4x8x16". Unpainted.

9 hours spent resuscitating this utility trailer this week.
03/19/2017

9 hours spent resuscitating this utility trailer this week.

I bought a ring roller recently and was glad to have a use for it right away. "Easily removable 4 calf milk pail bracket...
12/30/2016

I bought a ring roller recently and was glad to have a use for it right away. "Easily removable 4 calf milk pail bracket". To be tested in the barn and if it works out well: two more will be fabbed.

I think the best name I can give this project is "Modern Harvest table frame". Ready to clean up and paint.
11/10/2016

I think the best name I can give this project is "Modern Harvest table frame". Ready to clean up and paint.

First "5 teeth on springs blade" done. Just the tarp portion left to go on the second one. After football and supper.
11/06/2016

First "5 teeth on springs blade" done. Just the tarp portion left to go on the second one. After football and supper.

Weld shop? Man cave? Needs a cleaning very badly? Too busy? Yes. X4.
09/24/2016

Weld shop? Man cave? Needs a cleaning very badly? Too busy? Yes. X4.

35 steaks are ready....er...stakes....and the first pad on the sander is officially worn out....had to finish the last 5...
06/07/2016

35 steaks are ready....er...stakes....and the first pad on the sander is officially worn out....had to finish the last 5 stakes on the bench grinder.....mmmm....steaks.

One blade, all fixed up for years more wear and tear on the outside bottom edges. I don't get to stick weld very much an...
05/28/2016

One blade, all fixed up for years more wear and tear on the outside bottom edges. I don't get to stick weld very much anymore, very glad for the opportunity to use "extreme abrasive" rods on this.

One cement mixer. Three point hitch flatbar lugs replaced with 1/2" flatbar and mixer converted to run hydraulic instead...
05/21/2016

One cement mixer. Three point hitch flatbar lugs replaced with 1/2" flatbar and mixer converted to run hydraulic instead of PTO. Four hours plus materials.

One outdoor motor weather guard ready to take over and "try on" for bolt holes.
04/16/2016

One outdoor motor weather guard ready to take over and "try on" for bolt holes.

Address

1675 Thompson Road E
Waterford, ON
N0E1Y0

Website

Alerts

Be the first to know and let us send you an email when JD Poss (welding repairs & fabrication) posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category