Spraying Systems Co. Canada Ltd.

Call Directions Website Contact the business

Spraying Systems Co. Canada Ltd. The world's leader in spray technology, Spraying Systems Co. Spray analysis, performance testing, prototyping and consulting services are also available.

designs and manufactures spray nozzles, air control nozzles, tank washers, accessories, spray systems and controls, and fabricated products such as spray headers and lances.

One week out from FABTECH 2026. Here is what is on the table at booth C2541: - Precision Spray Control live - JXM air at...
10/14/2026

One week out from FABTECH 2026. Here is what is on the table at booth C2541:
- Precision Spray Control live
- JXM air atomizing spray guns you can pull off the manifold yourself, no tools needed
- Two demos an hour, about five minutes each, all three days

Bring a part, a line speed, or a problem you have not solved yet. Scan your badge while you are there for a chance to win a YETI cooler.

Can't make it to Las Vegas? A local sales engineer can walk your line instead: https://ow.ly/ptYF50ZSrRz

The Americas LNG Summit exhibit hall opens tomorrow, and we're ready.Visit Spraying Systems Co. at Booth C39 to meet our...
10/13/2026

The Americas LNG Summit exhibit hall opens tomorrow, and we're ready.
Visit Spraying Systems Co. at Booth C39 to meet our team and talk about your spray applications, from nozzle selection to testing, fabrication, and on-site support.

Booth C39 | Lake Charles Event Center

Wednesday, October 14: 9:00 AM to 6:00 PM
Thursday, October 15: 9:00 AM to 5:30 PM

See you in Lake Charles.

The Americas LNG Summit & Exhibition is coming up.Come see Spraying Systems Co. at Booth C39. Bring your process questio...
10/11/2026

The Americas LNG Summit & Exhibition is coming up.

Come see Spraying Systems Co. at Booth C39. Bring your process questions, your drawings, or a challenge you're working through, and our team will help you find the right spray solution for your application.

Booth C39 | Lake Charles Event Center | October 14 and 15

We're heading to Lake Charles for the Americas LNG Summit & Exhibition. If your team works on LNG liquefaction or power ...
10/09/2026

We're heading to Lake Charles for the Americas LNG Summit & Exhibition.

If your team works on LNG liquefaction or power generation, stop by Booth C39 to meet our spray experts. We'll be talking about cooling, quench injection, turbine inlet cooling, and emissions control, and how the right spray technology supports throughput and reliable operation.

Booth C39 | Lake Charles Event Center | October 14 and 15

Is changing the pressure the right way to change flow rate?Turn it down to use less fluid and drop size climbs, spray an...
10/06/2026

Is changing the pressure the right way to change flow rate?
Turn it down to use less fluid and drop size climbs, spray angle narrows, and coverage goes uneven. Turn it up to fix coverage and you are over applying again. Pressure controls atomization and pattern. It was never meant to be your flow control.

PulseJet nozzles pulse on and off at a fixed pressure instead, so flow drops while spray angle and coverage hold. That is the mechanism behind reductions of up to 70 percent in lubricating oil use.

See it run live at FABTECH booth C2541, or talk to an engineer now: https://ow.ly/XEil50ZSrJN

Most forming lines spray more lubricant than they need to.Oil on the floor, mist in the air, scrap on the QC report. The...
09/29/2026

Most forming lines spray more lubricant than they need to.
Oil on the floor, mist in the air, scrap on the QC report. They usually trace back to the same cause: the spray was never controlled tightly enough. Flow rate, coverage, drop size, and timing decide whether lubricant lands on the blank or on everything around it.

At FABTECH 2026 we are running live demos that show what changes when you control all four. Booth C2541, Las Vegas, October 21 to 23.

Want to talk before the show? Contact a spray expert: https://ow.ly/JEtF50ZSrF6

Every wash cycle carries a cost: water, heat, chemistry, effluent, labor, and the minutes the trailer isn't moving.Right...
09/25/2026

Every wash cycle carries a cost: water, heat, chemistry, effluent, labor, and the minutes the trailer isn't moving.
Right-sizing the cleaning equipment to the tank and the residue is the lever most operations haven't pulled. Better impact and coverage per cycle means fewer re-washes — and less of everything you're paying for on the wash you do run.

We're at National Tank Truck Week this week. Bring us your toughest residue.
NTTC 2026 — Booth 506.

A trailer sitting in the wash bay isn't earning. It's waiting.Cycle time in the bay sets the ceiling on how many loads y...
09/21/2026

A trailer sitting in the wash bay isn't earning. It's waiting.
Cycle time in the bay sets the ceiling on how many loads your fleet can turn in a week — and most bays are still losing time to re-washes, inconsistent coverage, and equipment that was never specified for the residue it's actually cleaning.

At National Tank Truck Week we're talking with fleet and wash operators about where that time really goes.

NTTC 2026 — Booth 506.

Most wash bays get assembled one purchase at a time. Tank cleaning nozzles from one supplier, exterior wash from another...
09/14/2026

Most wash bays get assembled one purchase at a time. Tank cleaning nozzles from one supplier, exterior wash from another, pumps and controls from a third. Then no one owns the result.

Spraying Systems Co. engineers the whole bay — interior tank cleaning, exterior wash, pumps, controls — backed by testing and application support. One partner, one accountable outcome.

We'll be at National Tank Truck Week. Come tell us what your bay is up against.
NTTC 2026 — Booth 506.

The nozzle is one variable. The system determines the result.DescaleJet® ULTRA delivers 25% more impact than the previou...
08/24/2026

The nozzle is one variable. The system determines the result.
DescaleJet® ULTRA delivers 25% more impact than the previous generation. Whether that impact reaches the strip depends on header design, nozzle spacing, standoff distance, and pump capacity.

So we do not just ship nozzles. We bring spray expertise, steel industry experience, performance modeling and testing, dynamic fluid analysis, and custom fabrication to every descaling evaluation.

The goal is measured results on your line, not specifications on a data sheet.

Learn More: https://ow.ly/MHjX50Zy7R2

Address

4540 Eastgate Parkway, Unit 3
Mississauga, ON
L4W3W6

Opening Hours

Monday 8am - 5pm
Tuesday 8am - 5pm
Wednesday 8am - 5pm
Thursday 8am - 5pm
Friday 8am - 5pm

Telephone

+19054812146

Website

Alerts

Be the first to know and let us send you an email when Spraying Systems Co. Canada Ltd. posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Spraying Systems Co. Canada Ltd.:

Shortcuts

Sponsored

Share

Category