LanAgro

06/21/2026

🇵🇱 🇵🇱

A good quality front and rear mower shouldn't have to break the bank. Especially if you are seeking a basic setup with no conditioner. TALEX has a solution for small and medium sized farms seeking a 6.0-m to 6.40-m working width. Often considered to be the ideal solution, a front paired with single side combination offers the flexibility and mowing capacity that most farms seek. For the tractors in the 150 to 180 hp (80-90 hp per mower) the Maxi Cut and Fast Cut models offer ideal solutions, for a very reasonable investment.

At the front, the Fast Cut models feature a spring suspension system that provides for optimum terrain following (+7°/-6°), combined with quality gerboxes from proven manufacturers, and cutterbar that is protected against obstacle impact by a unique overload pin system that protects the disc unit and does not damage the other units. Further protection is provided by overload clutch on the PTO shaft, and attachment to the tractor is provided by a standard A frame. At the rear, the Maxi Cut models with their 3.0-m or 3.40-m working widths feature the same protected cutterbar and overload clutch on the PTO shaft. The central suspension adapts to the terrain, and the mower is equipped against obstacle impact by a hydraulic breakback system. All this at a price that will surprise you, and quality that exceeds expectations! Contact us for more information, and for importer-dealer inquiries within Canada: (613) 294-9144 or [email protected]

06/19/2026

🇩🇰 🇨🇦

The first GST Denmark Biostar rotary hoes have arrived in Canada! Looking for a chemical-free solution for w**ding? Looking for a crust-busting solution to help provide proper surface drainage on baked field surfaces? Then a Biostar is your solution.

Field proven in Europe, USA, and now Canada. The Biostar is a rapid, efficient, means of providing mechanical w**ding in both organic and conventional crop production. Promoting healthy crop growth, higher yields, and supporting soil health. Want to learn more? Interested in becoming an importer-dealer? Contact us at: (613)294 9144 or [email protected]

06/17/2026

🇬🇷 🇬🇷

The biggest of acreages requires the biggest of machines. The DiscoPlus XL is the largest of the Siptec disc cultivator range, with impressive working widths of 8m, 10m, and 12m. Excellent results in cultivating stubble or for preparing a seedbed after ploughing, and available with a choice of 520mm or 570mm discs. All mounted in pairs, with double-row sealed bearings, and on rubber block type suspension. A low maintenance combo that provides for impressive durability and long operational lifespan. A working depth of 3.5cm to 12cm is possible, using the precise hydraulic depth control which is a standard feature.

Attachment to the tractor is by a 51mm towing eye. The disc frame sections are carried on a heavy-duty central frame section, and a V-folded on to the transport section to a compact 3.0m transport width. The transport frame features 4x 500/50R17 tires, for optimum road stability. Side deflector plates, rebound harrow, star side discs, a pivoting towing eye, and road safety reflector panels are available as optional accessories. A choice of rear rollers including: cage roller (580mm), knife ring roller (540mm), and U-ring roller (540mm), are available to meet customer requirements. Recommended hp ranges from a minimum of 280hp with smallest 8m XL model to a maximum of 500hp on the largest 12m model. For more information on the DiscoPlus XL and the entire Siptec range, as well as for importer-dealer inquiries, please contact us at: (613)294 9144 or [email protected]

06/15/2026

🇵🇱 🇵🇱

Quality at reasonable cost. That combined with offering unique solutions to for small, medium, and large sized farms is something we have become well known for. That, and our direct-to-dealer concept that elminates the often senseless margins of importer-distributors. So, it we struck out to find a new product line in our grassland and sweeping sectors that would check all of those boxes! We have succeeded in finding one!

LanAgro is pleased to announce that we have reached an agreement with TALEX Sp.Z o.o. (Borzytuchom, Poland) to offer the product range under our direct-to-dealer sales concept, for both the agriculture machinery and the commercial product range. Disc mowers, swath conditioners, bale wrappers, sweepers, and mulchers of various types (that compliment our existing product ranges). We will aiming to focus our market development in Ontario, Québec, and the Atlantic region to start. For more information and for importer-dealer inquiries, pleaee contact us at: (613) 294-9144 or [email protected]

06/13/2026

🇩🇰 🇩🇰

Grinding straw? No problem! Wanting to grind more than straw? Still, it will be no problem! The I-Grind from Grønning Smede & Maskinforretning offers nearly endless possibilities for processing material. For agriculture, for commercial, and even in recycling operations. This flex hammermill type tub grinder is highly mopbile, easy-to-fill, easy-to-maintain, and provides revenue generation possibilities for both farmers and contractors alike. Moderate horsepower requirement, impressive output, and even possible to process both dry and high-moisture grains make it a universal use machine.

The principle consists of mobile chassis, equipped with a drive system, hammer mill with changeable screens, rotating tub, discharge conveyor, and handy control terminal. The ability to process grains one day and then biomass/compost material on the next day makes the I-grind an all year-round use machine. For feedlots preparing rations and bedding, as mobile mill setup at customer locations for processing high-moisture grain corn or dry grain milling, as a contractor unit processing recyclable materials, as a compost mill at a bagging facility, the choice is ultimately yours. For more information, and for importer-dealer inquiries, please contact us for more information: (613)294 9144 or [email protected]

06/11/2026

🇦🇹 🇨🇿

Innovation. We are no strangers to it. The cutting edge in technology, time saving and highly effective means, have always been at the forefront of what we have tried to offer. When it comes to w**d control, without chemicals, with reduced labor input, with increased effectiveness, and with amazing precision is something we have become very involved with. The Austrian manufacturer samo Maschinenbau GmbH and their association with Ullmanna have rapidly market leaders in AI technology for in-row w**ding.

A proven systen, with over 14,000 hours in the field, in over 140 different types of crops (including sugar beets, corn, sunflowers, rice, cabbage, onions, tomates, onions, pumpkins, parsely, lettuce, and even marigolds), with a 90% reduction w**ding costs (eliminating 60 employees w**ding by hand), the NEWMAN AI w**der from Ullmanna (sold/supported worldwide by Samo Maschinenbau) has set the standard to which all w**ding tech is measured. Over 150 machines in the field, satisfied farmers, and outstanding crop quality that has been achieved with no chemicals to control the w**ds. Want to know more? For dealer imnporter-dealer inquiries in Ontario, Quebec, and the maritimes please contact us at: (613)294 9144 or [email protected]

06/07/2026

🇨🇿 🇨🇿

A reliable, 6 rotor, tedder, that is perfectly sized for most farms. With a working width of 6.76-m and a 3pt mounting that is designed for tough use, the OZ-676/OZ-676H teders from Rozmital perform excellent crop spreading. Featuring 6 arms per rotor, 540 rpm PTO drive, and a mechanical side shift is standard on the OZ-676 model in order to direct the crop away from the ditch or fenceline. OZ-676H models feature hydraulic side shift as standard.

A hallmark of the OZ-676/OZ-676H models is the low power requirement, as a tractor in the 60-65hp. A low weight of 795 kg (798 for the OZ-676H) means that you don't need the largest and heaviest tractor on the farm for transport. The standard tie size is 16x6,5-8, providing for good flotation, and a theoretical hourly capacity of 7.7 ha/hr. is possible. As standard the OZ-676/OZ-676H models are equipped with double tines, but hook tines are available as an option. For more information and importer-dealer inquiries, please contact us at: (613)294 9144 or [email protected]

06/07/2026

🇮🇹 🇮🇹

Zero means zero comprimises when it comes to flexibility. The unique inter-row abilities of the Zero series power harrows from Moreni Agricultural Machinery make them an interesting choice for vegetable and fruit growers, but their use doesn't stop with fruits and vegatables, their versatility puts them at home in crops such as Hops (a vital ingredient in making good beer). Their arch design allows them to pass over the beds and windrows, to work in between.

With a variable working width, from 2.12m to 2.72m, the width being cultivated can easily be set hydraulically. Depending on the model 2+2, 3+3, or 4+4 rotors that can be equipped with Moreni's Samauri rotor blades - ideal for processing large volumes of organic material. Each rotor shaft features 3x bearings, and are protected against stones as standard. The wider rear roller elimnates ridging, and integrated leveling bar ensures smooth results. The power transmission system, with 3 gearboxes (central and one for each set of rotors) is engineered to the same standards as found the larger, folding models. For more information and for importer-dealer inquiries, please contact us: (613) 294-9144 or [email protected]

Send a message to learn more

06/06/2026

"...and then came the Canadians"

Fearsome, with a reputation of being the stormtroopers of the Empire, courage was no stanger to them. On this day back in nineteen hundred and forty-four, along with our allies landed on Juno, Gold, Sword, Utah, and Omaha beaches along the coast of Normandie, France. The start of what Gen. Einsenhower referred to as "Great Crusade". To liberate Europe.

A generation that gave their all, for us to have it all.

Never forget.

06/05/2026

🇸🇪 🇸🇪

A tipping trailer for all seasons. Designed for rugged use, the tridem axle MetaQ 75 EUCON from Metsjö with it's 17m³ is right at home on the farm, in a contractor's fleet, or even on the jobsite. The awesome Swedish quality and engineering found in these trailers have made them a hallmark for depenability and durability throughout northern Europe. Quality that would be appreciated by any farmer, contractor, or construction company in Canada. As on shown in the video, equipped with 710/50R26,5 tires, forced steering on the front and rear axles, hydraulic brakes, and road speed rated up to 65 km/h with a load 10,5 tons. Axles are laser alinged during construction, ensuring precise handling and optimized tire wear.

The trailer body itself is constructed from Brinell 450 steel, with the floor having a thickness of 6mm, and the walls also featuring a thickness of 6mm. A hydraulic tailgate with a hight of 300mm forms part of the base specification. Tie down points are integrated into the outside of the walls, with lashing points integrated into the inside. The body can be swapped as needed for other other platforms, and mounting points for the support legs are also integrated into the structure. Yellow is the standard colour, with other colour options being available upon request. For importer-dealer inquiries, please contact us at: (613)294 9144 or [email protected]