Kinghou quick Mold change system

Página Principal
Brasil
Brasília, DF
Kinghou quick Mold change system

Como chegar Site Entre em contato com o negócio

Quick mold change systems for injection molding machines. WhatsApp: +86 180 5190 2698

28/10/2026

Where the Hydraulic Clamp Meets the Mold Plate

Follow the hydraulic clamp to the mold plate, not just the clamp body. These close and wider views show the contact location around the blue mold. Plate thickness and edge geometry need to be checked for the actual installation.

Which part of the mold interface would you check first?

27/10/2026

Hydraulic Clamp Placement Between Machine Tie Bars

Tie bars, platen slots and the mold area define the space available for hydraulic clamps. These site examples show the mounting area from several angles. Final placement needs to be checked against the machine and mold drawings.

Which part of the mold interface would you check first?

26/10/2026

Hydraulic Clamps on Empty and Loaded Platens

An empty platen shows the mounting slots. A loaded mold adds the actual clamping edge. These different machine setups illustrate why mold plate thickness, edge geometry and contact position all matter when checking compatibility.

Which part of the mold interface would you check first?

25/10/2026

Hydraulic Clamp Placement Beside Mold Connections

The mold edge is shared by clamps, connections and service lines. These installation examples show why clamp placement needs to be reviewed alongside the mold connections and available access space.

Which part of the mold interface would you check first?

24/10/2026

Platen Slot Preparation for Hydraulic Clamps

A hydraulic clamp has to match the platen slot before it can reach the right clamping position. These site examples show slot preparation and installed clamps. Confirm the slot dimensions and mounting position against the platen and mold drawings.

Which part of the mold interface would you check first?

23/10/2026

How Hydraulic Clamps Adapt Across Different Machines

The same hydraulic clamping idea can look different from one machine to another. This cross-site edit compares platen space, access paths, clamp positions and hose routing. The sequence stays focused on visible machine conditions and actual installation details.

22/10/2026

On-Site Hydraulic Clamp Installation and Commissioning

Installation and commissioning connect people, controls and machine-side clamp points. This overseas site edit shows several stages of the on-site review without making unsupported performance claims. The sequence stays focused on visible machine conditions and actual installation details.

21/10/2026

Hydraulic Clamp Routing Across a Large Platen

A large platen makes routing discipline easy to see. This multi-source edit follows the hydraulic clamps and hoses across the upper, middle and lower mounting zones. The sequence stays focused on visible machine conditions and actual installation details.

20/10/2026

Clamp and Hose Coordination on an Opposed Injection Machine

On an opposed injection machine, clamp placement and hose routing must share a compact working space. These views show how the platen, clamps, hoses and controls are coordinated. The sequence stays focused on visible machine conditions and actual installation details.

19/10/2026

A whole row of machines, all running KINGHOU. When a customer trusts you with their entire shop floor, you know the system delivers.

Endereço

Brasília, DF

Site

http://WWW.Kinghou.net/

Notificações

Seja o primeiro a saber: enviaremos um e-mail para você quando Kinghou quick Mold change system publicar novidades e promoções. Seu endereço de e-mail não será usado para nenhum outro fim, e você pode cancelar a inscrição a qualquer momento.