KPerformance

KPerformance DIY programmable engine management systems:
KdFi
MaxxEcu
SM3(megasquirt)

29/05/2026

πŸ”§ On demand: custom firmware & TunerStudio INI for our TinyEGT module!
Serge Colot

Gear selector support for sequential gearbox over CAN bus to SM3+ 🏎️

βœ… 6x EGT or unused EGT channels as ADC inouts + gear position on the same module
βœ… Sequential gear selector: Reverse / Neutral / 1-7 via 0-5V analogue input
βœ… Fully configurable voltage windows per gear in TunerStudio
βœ… Live gear display + fault detection
βœ… Plug & play with SM3+ via CAN bus

One module. Multiple functions. πŸ’ͺ

πŸ“¦ www.kperformance.be

24/05/2026

πŸš€ New site layout is live! Check it out at www.kperformance.be

β€”β€”

πŸ”§ BETA TOOLS β€” now available:

πŸŽ›οΈ SM3+ ECU Configurator
Not sure which SM3+ fits your build? Answer 3 questions and get your match β€” Plug & Play, Universal V2, Wire-In or Motronic DIY PCB.
πŸ‘‰ www.kperformance.be/tools/sm3-configurator.html

πŸ“Š Tune & Log Analyser
Upload your TunerStudio .msq tune and/or MegaLogViewer .mlg/.csv datalog. Get instant analysis β€” sync errors, AFR, knock, trigger settings and more. Works on MS3 / SM3+.
πŸ‘‰ www.kperformance.be/tools/tune-analyzer.html

β€”β€”

Beta feedback welcome β€” drop a comment or DM πŸ™Œ


KPerformance

πŸ”₯ TinyDBW β€” Drive-By-Wire for your MegaSquirt πŸ”₯Want to run a modern electronic throttle body with your MS3? Soon you can...
06/05/2026

πŸ”₯ TinyDBW β€” Drive-By-Wire for your MegaSquirt πŸ”₯

Want to run a modern electronic throttle body with your MS3? Soon you can!

πŸ“Έ Throttle body + electronic pedal + our TinyDBW controller = done.

βœ… Plug & play MS3 passthrough β€” configure everything straight from TunerStudio, no extra software needed

βœ… Dual channel 6A peakβ€” run two throttle bodies (V6/V8 setups), or use channel 2 as a wastegate / boost control / supercharger bypass actuator

βœ… Idle control built in β€” set your target RPM and let TinyDBW handle the rest

βœ… Cruise control built in β€” works with VSS from MS3, brake cancel, stalk input support

βœ… Safety first β€” soft &hardware watchdog, limp mode, plausibility checks on pedal & TPS sensors, fail-safe throttle close on fault

βœ… Compact, CAN-based, easy to wire

βœ… Designed and built in Belgium πŸ‡§πŸ‡ͺ

⚠️ Still WIP β€” final testing and validation coming up. Stay tuned for the release!
Ditch that cable throttle. Go DBW. Go Tiny.

πŸ‘‰ KPerformance.be

DriveByWire DIYTuning

πŸ”₯ TinyDBW β€” Drive-By-Wire for your MegaSquirt πŸ”₯Want to run a modern electronic throttle body with your MS3? Soon you can...
06/05/2026

πŸ”₯ TinyDBW β€” Drive-By-Wire for your MegaSquirt πŸ”₯

Want to run a modern electronic throttle body with your MS3? Soon you can!

πŸ“Έ Throttle body + electronic pedal + our TinyDBW controller = done.

βœ… Plug & play MS3 passthrough β€” configure everything straight from TunerStudio, no extra software needed

βœ… Dual channel 6A peakβ€” run two throttle bodies (V6/V8 setups), or use channel 2 as a wastegate / boost control / supercharger bypass actuator

βœ… Idle control built in β€” set your target RPM and let TinyDBW handle the rest

βœ… Cruise control built in β€” works with VSS from MS3, brake cancel, stalk input support

βœ… Safety first β€” soft &hardware watchdog, limp mode, plausibility checks on pedal & TPS sensors, fail-safe throttle close on fault

βœ… Compact, CAN-based, easy to wire

βœ… Designed and built in Belgium πŸ‡§πŸ‡ͺ

⚠️ Still WIP β€” final testing and validation coming up. Stay tuned for the release!
Ditch that cable throttle. Go DBW. Go Tiny.

πŸ‘‰ KPerformance.be

πŸ”Œ SM3 V2 β€” Interactive Pinout is LIVE!No more digging through PDFs. Just click the pin you need.βœ… All connectors in one ...
26/03/2026

πŸ”Œ SM3 V2 β€” Interactive Pinout is LIVE!

No more digging through PDFs. Just click the pin you need.
βœ… All connectors in one overview
βœ… Filter by function (injectors, ignition, analog, CAN…)
βœ… Search by name or signal type
βœ… Full description + wiring notes per pin

Whether you’re tuning, troubleshooting or building a harness β€” this is the fastest reference you’ll have.

πŸ₯³πŸ₯³ Serge Colot
25/03/2026

πŸ₯³πŸ₯³ Serge Colot

πŸ”§ Tiny Controller Series Updated β€” Now with CAN Bus Passthrough!All sensor data straight into TunerStudio. Hassle free b...
16/03/2026

πŸ”§ Tiny Controller Series Updated β€” Now with CAN Bus Passthrough!
All sensor data straight into TunerStudio.
Hassle free by just using 1 single .INI file
οΏΌ
🌑️ TinyEGT Β· βš—οΈ TinyO2 Β· πŸ›°οΈ TinyGPS
β†’ Native MegaSquirt CAN passthrough
β†’ No MegaSquirt?
Auto-fallback to standard CAN for any ECU or datalogger!

πŸ“¦ New orders ship with updated firmware β€” ready out of the box(end of march)

πŸ”„ Existing users? Free update β€” just send it back to HQ

πŸ”— KPerformance.be/tiny-egt-controller-canbus

14/02/2026

Burn baby burn!

Adres

Vollezele
1570

Website

Meldingen

Wees de eerste die het weet en laat ons u een e-mail sturen wanneer KPerformance nieuws en promoties plaatst. Uw e-mailadres wordt niet voor andere doeleinden gebruikt en u kunt zich op elk gewenst moment afmelden.

Snelkoppelingen

Delen

Type