Budko Engineering

Budko Engineering High-quality metal fabrication solutions in the NT

Couple of staircases done for mezzanine workshop access on a local workshop, full DS40 compliance and a safety yellow th...
15/04/2026

Couple of staircases done for mezzanine workshop access on a local workshop, full DS40 compliance and a safety yellow that stands out! Good work boys πŸ‘Œ

We’ve been a little quiet on IG lately, too much work going on but watch out, we’re coming back with a bang with our new...
31/07/2025

We’ve been a little quiet on IG lately, too much work going on but watch out, we’re coming back with a bang with our new socials manager πŸ’₯ 🧨 πŸ”§

Custom built 7.6x2.5 Isuzu truck tray with removable racking and ramp storage headed out the yard this morning! More tra...
25/11/2024

Custom built 7.6x2.5 Isuzu truck tray with removable racking and ramp storage headed out the yard this morning!

More trays are in the works - watch this space! πŸ‘€πŸ˜Ž

Feel free to hit us up if you’re looking for a quote!

Some 12mm 500 grade Bisalloy wearing metal added to these chutes on a Sanvik screen. All material cut and counter-sunk o...
26/10/2024

Some 12mm 500 grade Bisalloy wearing metal added to these chutes on a Sanvik screen. All material cut and counter-sunk on site and at half the cost of oem wearing metal! Give us a call for for any of your wear part needs

Fully self-contained 20ft HQ office ready to go!βœ… A/C Split System and remote βœ… 6 double power outlets βœ… Commercial viny...
15/10/2024

Fully self-contained 20ft HQ office ready to go!

βœ… A/C Split System and remote
βœ… 6 double power outlets
βœ… Commercial vinyl flooring
βœ… Insulated panel lining
βœ… Qty 2 - 1200W x 900H window with fly screen
βœ… Commercial lighting
βœ… Convenient lockable PA door access
βœ… Fully self-contained - powered by just one external plug-in point

All electrics and A/C are fully certified. Available now, contact us for details!

Quick little repair for a civil contractor client. Old door lock ripped off due to partial pe*******on in the weld and b...
13/10/2024

Quick little repair for a civil contractor client. Old door lock ripped off due to partial pe*******on in the weld and base plate being undersized for the load. Replaced it with 12mm base plate and turned that wire feeder up ⚑️

Couple of frames knocked up for a solar electricity modular set going to a community in remote NT. No idea how they plan...
13/10/2024

Couple of frames knocked up for a solar electricity modular set going to a community in remote NT. No idea how they plan to use them but this is what the drawings called for

Some over-sized wings added to this Sandvik jaw crusher. These wings will allow the crusher to be fed by a loader with e...
30/09/2024

Some over-sized wings added to this Sandvik jaw crusher. These wings will allow the crusher to be fed by a loader with ease πŸ‘Œ Removable cross-member and lifting eyes also added so that sides can be lowered for transport and maintenance πŸ”§

Maximise your space with a fully self-contained 20ft HQ half office, half storage! Ideal for tradespeople, small busines...
30/09/2024

Maximise your space with a fully self-contained 20ft HQ half office, half storage! Ideal for tradespeople, small businesses, or anyone needing a dedicated workspace

Half office:
βœ… A/C Split System and remote
βœ… 3 double power outlets
βœ… Commercial vinyl flooring
βœ… Insulated panel lining
βœ… 1200W x 900H window with fly screen
βœ… Commercial lighting
βœ… Convenient lockable PA door access
βœ… Fully self-contained - powered by just one external plug-in point

Half workshop:
βœ… Freshly painted interior
βœ… Workbench
βœ… Double power outlet
βœ… Racking with room for bund
βœ… Commercial lighting

All electrics and A/C are fully certified.

Contact us today for more info!

Couple of moulds made for some pre-cast demountable blocks, I’d love to say this one was enjoyable but it’s as boring as...
25/09/2024

Couple of moulds made for some pre-cast demountable blocks, I’d love to say this one was enjoyable but it’s as boring as it sounds!

Address

9 Georgina Crescent
Yarrawonga, Northern Territory, NT
0830

Opening Hours

Monday 7am - 4pm
Tuesday 7am - 4pm
Wednesday 7am - 4pm
Thursday 7am - 4pm
Friday 7am - 4pm

Alerts

Be the first to know and let us send you an email when Budko Engineering posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Share