Weld Monkey Custom Fabrication

Weld Monkey Custom Fabrication Fabrication | Welding | Repairs | 3D CAD Design
Aluminium ~ Stainless ~ Mild steel

Almost a year later 😅It’s been almost a year since we completed this fence job and never shared it. But we recently revi...
18/02/2025

Almost a year later 😅

It’s been almost a year since we completed this fence job and never shared it. But we recently revisited the job to see how it looks with all the landscaping finished.

Something a bit different and custom to fit in nicely with the stunning new house built by

Fabrication photos and client review to come shortly.

Client review 🙌
04/02/2025

Client review 🙌

Sneak peek 🫣 Here is a little sneak peek at one of our projects that has been going on for a few months now. After compl...
03/02/2025

Sneak peek 🫣

Here is a little sneak peek at one of our projects that has been going on for a few months now.

After completing a few smaller projects for this client, they then put their trust in us to bring their next big vision to life. With only a few more additions to go on this build stay tuned for some updated photos.

~ Stainless Steel Handrail ~This was one of our most recent jobs. With little notice we made it happen! With roughly a w...
03/02/2025

~ Stainless Steel Handrail ~

This was one of our most recent jobs. With little notice we made it happen!
With roughly a week turn around on this job from initial site measure/job inspection to quoting, final measure up, obtaining materials, fabrication and finally install.

Multiple 16 hour days throughout the heat but we got it done and we’re super happy with the end result.

~ Steel roof structure ~Here is a quick little roof structure we fabricated late last year for as part of their constru...
03/02/2025

~ Steel roof structure ~

Here is a quick little roof structure we fabricated late last year for as part of their construction works at St Catherine’s Wangaratta

~ Feature post covers ~These can be made pre made and slipped over when installing the posts or welded and flushed aroun...
03/02/2025

~ Feature post covers ~

These can be made pre made and slipped over when installing the posts or welded and flushed around the post on site.

These will get screwed to desired height when it comes time for concreting.

A little bit different to the Aluminium slatted gates that we normally produce. Here are some industrial galvanised gate...
03/02/2025

A little bit different to the Aluminium slatted gates that we normally produce.

Here are some industrial galvanised gates that we fabricated and installed for an industrial yard in Wangaratta, VIC.

Check out this open steel frame we completed.Open steel frame just needing the cables and then it’s time for the vines t...
13/01/2025

Check out this open steel frame we completed.

Open steel frame just needing the cables and then it’s time for the vines to take over and provide the shade.

Last job we completed for 2024 🙌We went the extra mile to make sure we could get this job done for Lyn just in time for ...
08/01/2025

Last job we completed for 2024 🙌

We went the extra mile to make sure we could get this job done for Lyn just in time for her family to enjoy over the Christmas break.

The existing pool structure was more looks then practicality, so we came up with a design that met both criteria.

We utilised 65mm Aluminium slats in combination with a laser cut and folded receiver that gives a seamless look.

If your pool area or any outdoor space needs some attention, get in contact with us today!

📱 0476079234
📧 [email protected]

Mezzanine floor we recently built for a returning customer. Giving this shed much more usable storage space.
29/10/2024

Mezzanine floor we recently built for a returning customer.
Giving this shed much more usable storage space.

Steel subframes for two mirrored decks we fabricated to go around a pool.
29/10/2024

Steel subframes for two mirrored decks we fabricated to go around a pool.

Address

Wangaratta, VIC

Telephone

+61476079234

Website

Alerts

Be the first to know and let us send you an email when Weld Monkey Custom Fabrication posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Weld Monkey Custom Fabrication:

Shortcuts

Share

Category