MarineTorq

MarineTorq MarineTorq specialises in stainless steel manifolds for marine petrol and diesel inboard engines.

18/05/2026

Stop treating manifolds like a consumable.
MarineTorq is built for the long haul: replaceable sacrificial zinc anode protection against corrosion/electrolysis, a one-piece design to stop leaky risers, improved performance with better exhaust gas flow and a larger water jacket, and up to 80% less dead weight (~7kg vs 50kg+ cast iron).
Comment your engine model + year or DM “Fitment”.

07/05/2026

This customer sent us this before and after from their MarineTorq manifold install. How much better does that sound with significantly improved airflow?
These manifolds will last significantly longer than the standard cast with our sacrifical anode, while having better sound, increased performance and cooling with decreased weight and fuel consumption.
DM us or comment with your boat model and engine so we can fit you up with the manifolds you need for your boat.

A customer sent us these photos when installing their manifolds, check out the weight savings! This standard cast iron m...
28/04/2026

A customer sent us these photos when installing their manifolds, check out the weight savings! This standard cast iron manifold weighed 27kg (about 60 pounds) which is considered quite light, and the MarineTorq replacement weighed just 9.5kg (around 21 pounds)! A weight saving just shy of 66% or two thirds! This particular cast iron manifold is pretty light in comparison to a lot of offerings on other engines, just imagine the weight savings, performance increase and maintenance savings it will have on your boat.
Comment or DM us your boat engine and we will fit you up with your next set of manifolds.

Stop treating manifolds like a consumable — upgrade once and move on.• Up to 80% less dead weight. 50kg+ cast iron vs ~7...
30/03/2026

Stop treating manifolds like a consumable — upgrade once and move on.
• Up to 80% less dead weight. 50kg+ cast iron vs ~7kg stainless
• Replaceable sacrificial zinc anode fights corrosion/electrolysis
• Patented one-piece design (no joints/gaskets to leak)
• Less downtime — no losing boating time to repeat manifold swaps
Comment your engine model + year or DM "Fitment" to get the right set.

25/03/2026

Have a look at this video a customer sent us, stoked with his new set of MarineTorq Stainless Steel manifolds on his Volvo Penta V8. This motor is ready for years of trouble free boating, where he just has to check the sacrificial anodes every few months, and if the anodes are corroded? Pop a new one in and the health of the manifolds is fully reset.
Comment your engine model + year or DM “Fitment” and we’ll get you the set you need for your boat engine so you can enjoy the same freedoms as this customer.

A clean engine bay is nice. A protected one is more important.MarineTorq stainless manifolds are designed for the long h...
19/03/2026

A clean engine bay is nice. A protected one is more important.
MarineTorq stainless manifolds are designed for the long haul with replaceable zinc anode protection against corrosion/electrolysis, a one-piece design to reduce leak points, and up to 80% less dead weight (~7kg vs 50kg+ cast iron). We chuck the pretty looks in for free.
Less downtime. More boating.
Comment your engine model + year or DM “Fitment” and we’ll match you with the right set of manifolds for your boat.

Boating days > Wrenching days- Replaceable zinc anode protection against corrosion/electrolysis- One-piece design to red...
16/03/2026

Boating days > Wrenching days
- Replaceable zinc anode protection against corrosion/electrolysis
- One-piece design to reduce leak points
- Up to 80% less dead weight (~7kg vs 50kg+ cast iron).
Less downtime. More boating.
Comment your engine model + year or DM “Fitment” and we’ll match the right set.

Be honest, when did you last check inside your manifolds?Cast iron can rust internally long before you see anything outs...
12/03/2026

Be honest, when did you last check inside your manifolds?
Cast iron can rust internally long before you see anything outside.

MarineTorq stainless manifolds are designed to help prevent this with replaceable zinc anode protection against corrosion/electrolysis, and they drop dead weight by up to 80% (~7kg per manifold vs 50kg+ cast iron).
Better fuel economy, increased performance, less downtime, and cheaper maintenance in one upgrade.
Comment your engine model + year or DM “Fitment”.

Still running cast iron manifolds?You’re carrying 50kg+ of dead weight and signing up for repeat replacements.Go stainle...
09/03/2026

Still running cast iron manifolds?
You’re carrying 50kg+ of dead weight and signing up for repeat replacements.
Go stainless (~7kg) with replaceable anode protection and one piece design so you can spend more weekends boating instead of wrenching.
DM “Fitment” or comment your engine model + year.

Not a consumable - A solution.MarineTorq stainless manifolds are built to be the last set you want to buy- Replaceable s...
02/03/2026

Not a consumable - A solution.
MarineTorq stainless manifolds are built to be the last set you want to buy
- Replaceable sacrificial zinc anode to fight corrosion/electrolysis
- One-piece design to reduce leak points.
- ~7kg vs 50kg+ cast iron (up to 80% less dead weight)
Less downtime. More boating.
Comment your engine model + year or DM “Fitment” and we’ll match the right set.

Address

10/28 Yilen Close
Thornton, NSW
2322

Opening Hours

Monday 9am - 5pm
Tuesday 9am - 5pm
Wednesday 9am - 5pm
Thursday 9am - 5pm
Friday 9am - 5pm

Telephone

+61240171746

Website

Alerts

Be the first to know and let us send you an email when MarineTorq posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to MarineTorq:

Shortcuts

Share

Category