CS Cavity Sliders AU

Directions Website Contact the business

CS Cavity Sliders AU The premier sliding door hardware manufacturer since 1986

20/10/2026

Get that minimal, squareset finish with the CS SquareStop extrusion…creating a clean finish around the doorway, with no visible jamb liner.

- The CS SquareStop Split Jamb makes installation quicker, easier, neater and stronger

- Pair it with NoClosingJamb and Full-Height details for a door that blends into the wall

- Suits 90mm framing, with options for 10mm or 13mm linings

- Custom sizes up to 2700mm high x 2700mm wide

If you’re working with non-standard wall linings, you can achieve the same look with the CS 3-Cell Split Jamb.

Comment ‘spec sheet’ to get more details.

19/10/2026

From an opening to a statement.

This white CS NewYorker pocket door, finished with full height detail and square set finish, turns a simple doorway into an architectural feature.

It lets light through while keeping the privacy and allows the space to easily transition from open to closed.

A beatifully considered feature in Latch Build • Wanaka Builders’s stunning Wanaka home.

16/10/2026

A narrow hallway doesn’t have to mean a narrow opening. In this build, the CS Full-Height Track with three overtaking doors lets the media room open up fully to the hallway, or close off completely when it’s needed.

What makes it work:

- Heavy-duty extruded aluminium track, available in 1 to 5 track set-ups
- At just 36mm high, it fits typical ceiling batten spaces and the ceiling lining finishes flush with the track
- No bottom track, for a clean, seamless floor and ceiling line
- A door pick-up system for overtaking doors, built for smooth operation long after handover

It’s a flexible, quality solution for architects and builders working with tight spaces and big openings.

Thanks to the Gibson Builders Wanaka team for the stellar install!

16/10/2026

A narrow hallway doesn’t have to mean a narrow opening. In this build, the CS Full-Height Track with three overtaking doors lets the media room open up fully to the hallway, or close off completely when it’s needed.

What makes it work:

- Heavy-duty extruded aluminium track, available in 1 to 5 track set-ups
- At just 36mm high, it fits typical ceiling batten spaces and the ceiling lining finishes flush with the track
- No bottom track, for a clean, seamless floor and ceiling line
- A door pick-up system for overtaking doors, built for smooth operation long after handover

It’s a flexible, quality solution for architects and builders working with tight spaces and big openings.

Thanks to the Gibson Builders Wanaka team for the stellar install!

13/10/2026

configurations to meet your design needs.

One loft look. Many design possibilities.

Featured Specification:

Door Type: Cavity Slider
Lite Configuration: 2V-3H
Handle: CS Flush Pull and Edge Pull
Glass Type: Clear

Comment LOFT SERIES to get the brochure.

12/10/2026

Here’s why it makes a difference.

CS Cavity Sliders are designed with offset nogs to allow you to drill through to a stud without affecting the smooth sliding performance of the pocket door.

Simply pull the nogs apart, drill through and you maintain the opening in the pocket so the jambs don’t get squeezed and rub on the door.

For more installation tips, troubleshooting and key details for finishes, trim calculations and more comment ‘Pocket Guide’.

12/10/2026

The CS SofStop, tested to 100,000 cycles.

Now available on more doors, from 580mm wide and up to 160kg. Choose single action for soft close, or dual action for soft close and soft open.

It’s the perfect addition to CS cavity slider and track.

09/10/2026

The addition clients notice.

CS’s signature soft open and close just got an upgrade. The dual-action CS SofStop is now available on more doors…from 580mm wide and up to 160kg. Tested 100,000 cycles to offer an ultra smooth, quiet and safe soft close and open every time.

Already have a CS Cavity Slider track system? A Single SofStop (soft close only) can be retrofitted to existing tracks and pockets.

It’s the detail your clients will feel long after handover.

09/10/2026

For more CS installation tips and cavity slider troubleshooting…get your hands on a CS Pocket Guide. Comment POCKET GUIDE to get a copy.

08/10/2026

Call backs cost time and money and a phone call about a cavity sliders scraping is the last thing you want…but all too common.

That’s why a CS engineered cavity slider is built to avoid the common causes of a scraping pocket door.

- Self centring hanger pin to ensure the door is hanging straight in the pocket

- Pre- Cambered jambs to ensure the pocket isn’t squeezed when tiling or cabinetry is fixed to the pocket

Find out more about the CS cavity slider systems and solutions in the CS Pocket Guide. Comment POCKET GUIDE to get your copy.

Address

1056-1062 Canley Vale Road , Wetherill Park
Sydney, NSW
2164

Opening Hours

Monday 9am - 5pm
Tuesday 9am - 5pm
Wednesday 9am - 5pm
Thursday 9am - 5pm
Friday 9am - 5pm

Website

Alerts

Be the first to know and let us send you an email when CS Cavity Sliders AU posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to CS Cavity Sliders AU:

Shortcuts

Share

Category