Trafalgar Group

Trafalgar Group A proud Australian owned company with 75 years of local manufacturing history.

In this 60-minute plasterboard wall fire test, 5 x 1.5mm² TPS cables were installed through the new Trafalgar FyrePOWER...
04/09/2026


In this 60-minute plasterboard wall fire test, 5 x 1.5mm² TPS cables were installed through the new Trafalgar FyrePOWER GPO box into a 5 x light switch face plate, achieving the full FRL of -/60/60. 🔥

Prevent the spread of fire, heat and smoke through recessed electrical outlets, switches and power points with the FyrePOWER Fire Rated GPO Switch Wall Box.

The FyrePOWER GPO Box has also been tested with:
✅ TPS power cables with electrical outlets or light switches
✅ Cat6 data cables and internet ports
✅ Back-to-back installations

FyrePOWER makes verification easy! The FyrePOWER has visible identification even after installation - giving contractors, inspectors, and auditors a way to identify the installed system and access supporting documentation.

Simply scan the QR code to access the technical manual, helping make inspections faster and more transparent!

Find out more about the FyrePOWER and its tested applications here : https://hubs.li/Q04wFRYr0

02/09/2026

FyrePOWER - Designed for Easy Installation & Inspection 🔥
Check out our 2-minute FyrePOWER installation video to see just how quick and straightforward the installation process can be.

Prevent the spread of fire, heat and smoke through recessed electrical outlets, switches and power points with the FyrePOWER Fire Rated GPO Switch Wall Box. The FyrePOWER is tested to AS1530.4-2014 for both 60 min and 120 min wall applications.

Typically, Fire-rated GPO boxes are difficult to verify and identify during inspections.

FyrePOWER makes verification easy! The FyrePOWER has visible identification even after installation - giving contractors, inspectors, and auditors a way to identify the installed system and access supporting documentation.

🎥For 60-minute wall applications with our FyreFLEX sealant, check out our additional FyrePOWER installation video for a step-by-step demonstration: https://hubs.ly/Q04wc1Kw0
👉 Learn more about FyrePOWER:
https://hubs.ly/Q04wbXxv0

Introducing FyrePOWER - Designed for Easy Inspection🔥Prevent the spread of fire, heat and smoke through recessed electri...
01/09/2026

Introducing FyrePOWER - Designed for Easy Inspection🔥

Prevent the spread of fire, heat and smoke through recessed electrical outlets, switches and power points with the FyrePOWER Fire Rated GPO Switch Wall Box.

Every service pe*******on through a fire-rated wall must be protected with a tested fire-stopping system.
As required by AS1851, passive fire systems must be routinely inspected throughout the life of the building, making system identification and compliance verification critical during annual fire audits.

Typically, Fire-rated GPO boxes are difficult to verify and identify during inspections.
FyrePOWER makes verification easy! The FyrePOWER has visible identification even after installation - giving contractors, inspectors, and auditors a way to identify the installed system and access supporting documentation.
Simply scan the QR code to access the technical manual, helping make inspections faster and more transparent!

Key features:
✅Easily identifiable for compliance after install – no headaches at inspection!
✅ QR code linking directly to test reports
✅No Sealant required for -/120/120 Plasterboard walls! – No mess, Fast and Easy install!
✅60min and 120min wall applications
✅Tested to AS1530.4-2014
✅Maintain acoustic integrity
✅Tested with electrical and data cables
✅Made of galvanised steel with high performance intumescent pad
✅Earth connector and mechanical clamps
✅ Pre-formed fixing tabs

Spend less time verifying. More confidence in compliance.

👉 Learn more about the FyrePOWER here: https://hubs.ly/Q04w1sDm0
🎥 Watch the installation video: https://hubs.ly/Q04w1qs10

FyreSTRAP® provides a simple way to protect mixed service pe*******ons that run located through the head tracks of plast...
31/08/2026

FyreSTRAP® provides a simple way to protect mixed service pe*******ons that run located through the head tracks of plasterboard, or control joints above concrete and block walls.

Thanks to Vault Passive Fire in WA for sending us these installation pictures!

FyreSTRAP® provides a simple, retrofit-friendly solution for mixed service pe*******ons, with FyrePEX® HP Sealant used to fill the gap within the strap. Its compact design makes it ideal for applications where space is limited, providing industry-leading FRL’s of up to -/120/120 (system-specific) and a visibly compliant, orange finish!

Key Benefits:
✅ Fast and simple installation
✅ Retrofit-friendly design
✅ Flat packed for easy shipping, transport, and storage
✅ Cost-effective
✅ Allows mixed services to pass through one opening
✅ Space-saving and eliminates the need for 200mm separation between services
✅ Tested to AS1530.4-2014
✅ Tested for floor pe*******ons, with FyreSTRAP on the underside only
✅ Approvals for PVC Conduits (25mm) and Power Cables (up to 6mm²) – System Specific
✅ System-specific FRLs up to -/120/120

Learn more about FyreSTRAP® here: https://hubs.li/Q04vQw4f0

When protecting fire-rated ductwork, installers are looking for solutions that are not only compliant, but also fast, cl...
28/08/2026

When protecting fire-rated ductwork, installers are looking for solutions that are not only compliant, but also fast, clean and easy to install.

Duct fire stopping is frequently constrained by bulky systems, slow application methods, and challenging site conditions.

FyreWrap® is a lightweight fire protection solution designed for ductwork, offering a fast and clean installation process while maintaining tested fire performance for demanding applications. 💪

In this recent fire test, a 600 x 600 x 1.0mm galvanised steel square duct was protected using FyreWrap®, together with FyreBOARD Maxilite and FyreFLEX Sealant.

The tested system achieved:
• 120/120/60 fire resistance performance
• 60-minute RISF rating

Key features of the FyreWrap® system:
✅ Tested for large format square ductwork
✅ Fast, clean installation with no water source required on site
✅ Lightweight system compared to conventional fire spray solutions
✅ Off-site installation capability possible

Learn more about FyreWrap®: https://hubs.li/Q04vCXbT0

Stay up to date with the latest in access solutions! 🚪We’ve launched a dedicated TAccess LinkedIn page, bringing you upd...
26/08/2026

Stay up to date with the latest in access solutions! 🚪

We’ve launched a dedicated TAccess LinkedIn page, bringing you updates, product information, industry insights and more from the world of access panels, inspection doors and access solutions.

Follow the TAccess page to stay informed and never miss an update ✅

Follow us here: https://hubs.li/Q04vjVlY0

25/08/2026

Trafalgar’s FyreSHIELD Access Panel is designed specifically for construction professionals needing a compliant, easy-to-install fire-rated access solution.

Australian-made and tested, FyreSHIELD provides exceptional fire resistance and acoustic performance while integrating seamlessly into lightweight fire-rated walls.

Perfect for shaft walls and risers, FyreSHIELD is installed in Trafalgar Corex, a space-saving fireboard engineered for thin fire walls with two-way fire protection.

This means you can maintain safety and compliance without overcomplicating the build.
✅ Simplifies fire-rated shaft wall construction
✅ Lightweight and space-efficient for easy handling
✅ Tested and certified for fire and acoustic performance

Watch the full video here: https://hubs.li/Q04v8L_g0
View the full Access Panel range: https://hubs.li/Q04v8SyV0
Learn more about Trafalgar Corex: https://hubs.li/Q04v8Pl_0

On site, short on time, and working with multiple specs?The T-Fire System Selector App is designed to address these chal...
21/08/2026

On site, short on time, and working with multiple specs?

The T-Fire System Selector App is designed to address these challenges. Whether you're dealing with walls, shafts, floors, or ceilings, this innovative app makes installation compliance much easier.

Skip the search on site trying to figure out which system to use for pipes, cables, or ductwork—and save the time spent calling around for approvals!

Get instant answer, faster installations, and relief knowing your install won’t get knocked back by a certifier.

Try it today: https://hubs.li/Q04tPKhl0

Permanent formwork can make fire stopping pe*******ons difficult, especially when removing the formwork isn’t practical...
21/08/2026


Permanent formwork can make fire stopping pe*******ons difficult, especially when removing the formwork isn’t practical or cost effective.

The Trafalgar BladeRUNNER is a retrofit fire stopping solution designed to solve this issue, allowing fire stopping systems to be installed without removing the formwork around the pe*******on. 💪

In this Ritek Wall fire test, a 100mm PVC pipe and 100mm HDPE pipe were both fire stopped using the BladeRUNNER. Both specimens achieved an FRL of -/180/180, without removing the formwork. 🔥

🔗Find out more about BladeRUNNER and its tested applications here: https://hubs.li/Q04tKDkf0

The FyreCAP® is a fire-stopping device for electrical junction boxes, providing a fast, clean and simple way to maintain...
19/08/2026

The FyreCAP® is a fire-stopping device for electrical junction boxes, providing a fast, clean and simple way to maintain fire protection without removing the existing junction box or using sealants.

Thanks to Vault Passive Fire in WA for sending us these installation pictures!

FyreCAP® simply fits over the junction box and is designed to maintain the fire resistance of the surrounding wall or floor. With a retrofit design, pre-formed fixing tabs and removable tabs for conduit branches, the FyreCAP® provides an easy-to-install and visibly compliant solution.

Key Benefits:
✅ Sealant-free installation
✅ Tested and approved to -/120/120 FRL
✅ Suitable for concrete floor slabs and fire-rated wall applications
✅ Suitable for power and communication cables
✅ Pre-fitted intumescent to enhance integrity and insulation performance
✅ Visibly compliant for easier inspection and certification
✅ Tested to AS 1530.4:2014 and NCC compliant

FyreCAP® is a practical solution for maintaining passive fire protection around electrical junction boxes, combining straightforward installation with tested fire performance.

Learn more about the FyreCAP® here: https://hubs.li/Q04tvDQ40

Address

2-6 Straits Avenue, South Granville
Sydney, NSW
2142

Opening Hours

Monday 7:30am - 5pm
Tuesday 7:30am - 5pm
Wednesday 7:30am - 5pm
Thursday 7:30am - 5pm
Friday 7:30am - 5pm

Website

Alerts

Be the first to know and let us send you an email when Trafalgar Group posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Trafalgar Group:

Shortcuts

Share

Category