Advanced Performance Machining

Advanced Performance Machining APM has moved to a much better and more efficient way of working. As of February 2024, Aaron will only be contactable via email or FB messages.

He will aim to get back to you as soon as he can. We look forward to your message!

18/06/2026

But does it rev to the moon like this? 🌙

It's not very often you see a 6L LS with a BDS 671 blower running 15 PSI making a modest 1,000hp at 8200rpm! 🤯

🤝 Std stroke Callies Apex crank
🤝 Callies Compstar Extreme conrods
🤝 Manley forged pistons
🤝 Custom comp cams hyd roller camshaft
🤝 Pac valve springs
🤝 Ferrea valves
🤝 Aeroflow heads
🤝 BDS 671 blower
🤝 Johnson lifters
🤝 CHE paired shaft trunion kit with stock rockers
🤝 ARP fasteners
🤝 4 stage dry sump
🤝 Rollmaster chain set
🤝 10:1

When are you getting yours built?

Callies Performance Products Manley Performance Products, Inc. COMP Cams Aeroflow Performance Johnson Lifters Ferrea Racing Components CHE Precision Inc.

IT'S ALL COMING TOGETHER! 🎉The new home of APM is getting its final touches this week as the move-in comes to an end! Do...
16/06/2026

IT'S ALL COMING TOGETHER! 🎉

The new home of APM is getting its final touches this week as the move-in comes to an end! Don't worry, a shop tour is coming too 💪

The doors are open and so are the bookings! So get your build sheets finalised and get in touch today 👀

10/06/2026

Winternationals... we didn't quite get what we were hoping for, but the team continues to learn and head in the right direction with every pass. Sal and Ronnie continuing to steer and provide the feedback we need to keep the progress flowing.

As always, a massive thank you to the A Civil Motorsports Crew for having Aaron and Steve out for another massive weekend!

Tempe Tyre & Wheel Centre Top Doorslammer Australia Al's Race Glides Methanol Moonshine VP Racing Fuels Australia NDRC - National Drag Racing Championship

03/06/2026

Just listen 🎧

Originally built and run with a supercharger, this second-hand 355 stroker combo came to us in good condition, so we gav...
01/06/2026

Originally built and run with a supercharger, this second-hand 355 stroker combo came to us in good condition, so we gave it a freshen-up and a few upgrades to send it home with. After increasing compression, some cylinder head work and updating the valvetrain, it delivered a stout 515hp and 450ft/lb on the dyno.

✅ 10.8:1 Compression
✅ Crow Hydraulic Roller Cam (41571)
✅ Ported Cylinder Heads
✅ Upgraded Valvetrain
✅ COME Twin Throttle Body Intake & EFI
✅ Harrop Intake Manifold
✅ Holley Carburettor
✅ MSD Ignition
✅ Freshened, Machined & Assembled by APM

Making 515hp and 450ft/lb, this neat, tidy and highly streetable package is going to be an absolute weapon once it drops into its new home 👀

With the big move getting underway in the coming week, the APM crew are moving to a Tuesday to Friday - 4-day week! 🚨 Th...
27/05/2026

With the big move getting underway in the coming week, the APM crew are moving to a Tuesday to Friday - 4-day week! 🚨 This will come into effect from the 1st June and will be the new operating hours of Advanced Performance Machining, as we look to optimise shop hours and streamline operations.

This shift will allow us to increase productivity during operational hours and ensure the APM standard is upheld to the highest quality, as our valued clients have come to expect. New operating hours will be 7am-4:30pm.

We will be closed from the 1st June and reopening in the new location on Tuesday, 16th June! 🔥 During this time, please be understanding that we may not be as responsive to our messages, emails and phone calls.

22/05/2026

363 Windsor screamer! 📣

With a CHE LS rocker conversion kit, PAC valve springs and Johnson tiebar lifters, this was the Ford that could! Making 598hp and 495ft/lb , this package ran...

✅ Pump Gas
✅ Hydraulic Roller Cam
✅ Comp Cams
✅ AFR CNC Ported Cylinder Heads
✅ Edelbrock Intake Manifold
✅ ICE Ignition
✅ Dart Block
✅ Spec'd, Machined and built by APM

The XP panel van it is powering has NO IDEA what is coming for it 👀

The man who started it all 👑It is often taken for granted the positions we find ourselves in, but there are fewer stark ...
18/05/2026

The man who started it all 👑

It is often taken for granted the positions we find ourselves in, but there are fewer stark reminders of where it all began than having the founder of APM swinging spanners on race day. It was a privilege to have Steve on the tools at Nitro Champs on the 37 Chev for A Civil Motorsport.

We look forward to having him back again soon!

Not much left to say 🤐
11/05/2026

Not much left to say 🤐

Look what we've got 😈Do you want to see it on the dyno? 👀
07/05/2026

Look what we've got 😈

Do you want to see it on the dyno? 👀

Address

Unit 18, 42 Turner Road
Smeaton Grange, NSW
2567

Opening Hours

Tuesday 7am - 4:30pm
Wednesday 7am - 4:30pm
Thursday 7am - 4:30pm
Friday 7am - 4:30pm

Website

Alerts

Be the first to know and let us send you an email when Advanced Performance Machining posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Advanced Performance Machining:

Shortcuts

Share

Category