Machinery Specialist

10/09/2026

Jeremy Clarkson called it his favourite machine in the world. 🎬🌳

We will not argue with him.

The Dipperfox Stump Grinder turns what used to be a full-day job into a 5-minute demo one. No chemicals. No digging. No waiting. Just a stump, a few passes, and bare earth ready for the next stage.

If you are still burning stumps, grinding by hand, or leaving them to rot, you are working harder than you need to.

📩 DM us for the Dipperfox range.

Send a message to learn more

08/09/2026

Your shear should not nibble its way through scrap. It should bite. 🦈

The Trevibenne CS50 Scrap Shear is built for the piles where other shears stall - car frames, thick rebar, mixed structural steel. It cuts clean, separates clean, and means your scrap buyer pays premium prices for material that is not torn or half-cut.

If your current shear is leaving ragged edges, jamming on rebar, or your operator is making two cuts where one should do the job, the tool is costing you margin.

14 models from 5 to 180 tonnes. Hardox protection. Reversible blades. 360° rotation standard.

📩 DM us for the CS Series range.

06/09/2026

A bad cut costs more than a good shear. 🌲

Tear a stump and you are back next season fixing regrowth. Rip fibre and you are fighting the fall instead of controlling it. The OMEF Tree Shear bites once, holds steady, and drops the tree exactly where you need it.

Six models from 1.5-tonne minis up to 30-tonne heavy machines. Italian-built for the sites where you do not get a second chance.

If your operator is still adjusting, re-biting, or fighting the fall, the tool is working against them - not with them.

📩 DM us for the OMEF range.

03/09/2026

Before you pull parts, drain the car properly. 🚗⬇️

The Iris-Mec ELV Depollution Station recovers fuel, engine oil, transmission fluid, brake fluid, coolant, and washer fluid - all before your crew starts dismantling. Italian-built to European environmental standards, with modular setups that adapt to your existing lift or come complete with their own hydraulic stand.

If you are still gravity-draining on the floor or letting fluids mix in a catch tray, you are leaving recoverable product on the ground and inviting compliance headaches you do not need.

One station. Every fluid. Clean separation.

📩 DM us for the Iris-Mec depollution range.

30/08/2026

Whole wheels are dead weight. 🛞

The Iris-Mec SR11 Tyre and Rim Separator turns loose alloy and steel rims into compact, container-ready pieces. Separate the tyre. Crush the rim. Fit more per load.

If you are shipping whole wheels or hand-loading rims into containers, you are paying to transport air. The SR11 is the fastest, strongest unit in its class - Italian-built for the yards that do not mess around.

More payload per container. Less freight per tonne. Better margins on every shipment.

📩 DM us for the SR11.

27/08/2026

Delivery of an IRS Combi 300 Cable Granulator to a customer who is done selling mixed cable at mixed prices.

The Combi 300 processes up to 300 kg per hour (depending on your cable size and copper content) and comes with a turbine mill, VST air separation, and a built-in cooling system for the blade mill. One of the most advanced compact units on the market.

📩 DM us for the IRS range.

25/08/2026

Still sweeping your yard by hand? 🧹

The Bergamini Forklift Broom turns your forklift into a yard sweeper. Steel brushes, interchangeable wear parts, and Italian-built for the sites where downtime is not an option.

If your crew is pushing brooms while your forklift sits idle, you are paying twice for the same job.

📩 DM us for the Bergamini range.

20/08/2026

Another one off to a good home.

This Trevibenne sorting grab just left Machinery Specialist HQ, bound for a waste recycling yard where it will do what it does best - turn mixed waste into clean, premium material.

If your operator is still using a mechanical grab to sort waste, they are working twice as hard for half the margin. A proper sorting grab does not just move material. It separates it. Clean piles mean premium prices and lower landfill costs.

Built in Italy. Spec'd for Australian conditions. Now doing the hard yards where it belongs.

📩 DM us if you are ready to stop sorting by hand.

18/08/2026

Not sure which attachment fits your excavator? We built a guide for that. 🌲

Tree shear, stump grinder, grapple saw, log grab - the right forestry attachment depends on your carrier weight, hydraulic flow, and what you are actually cutting.

Our new selection guide maps common jobs - land clearing, stump removal, tree felling, log handling - to the correct attachment and excavator size. No guesswork. Just the right tool for the job.

From 1.5-tonne minis up to 50-tonne heavy machines, we have matched the OMEF, Dipperfox, Powerhand, and TreviBenne ranges to Australian conditions.

If you are running the wrong attachment for your hydraulics, you are burning fuel and wearing steel for no reason.

DM us your excavator model and we will tell you what fits.

16/08/2026

Your excavator is already on site. Why not make it earn twice? 🧲

An ATIB Magnet turns one machine into two. Dig trenches in the morning. Pull ferrous material in the afternoon. Same operator. Same fuel burn. Double the output.

Their range covers everything from compact hydraulic units for smaller excavators up to heavy-duty 360° rotating models with teeth for rebar recovery.

If you are moving scrap with a mechanical grab or sending a second machine to do what your excavator could handle, you are paying for capacity you already own.

📩 DM us for the ATIB range.