Swift Structural Solutions

Name: Swift Structural Solutions
Address: Jerrabomberra Avenue, Narrabundah, ACT, AU
Telephone: +61435204776

Home
Australia
Narrabundah, ACT
Swift Structural Solutions

Call Directions Website Contact the business

Specialists in building remediation, facade restoration, and waterproofing solutions to protect and extend your property’s lifespan.

21/10/2026

Is your building warranty about to expire? Get it inspected first.

Defects liability and statutory warranty periods don't last forever, and once they end, the cost of fixing defects can fall on the owners. Many defects (cracking, water ingress, failed waterproofing, facade and render problems) take time to show up, so they are often found late.

Before your warranty period ends:
1. Book an independent defect inspection
2. Get a written report with dated photos
3. Lodge your claim or notice with the builder or developer in writing before the deadline
4. Keep all records, emails and photos

A structural engineer's report gives the owners corporation or homeowner clear evidence of what is wrong, how serious it is and what needs fixing.

Warranty and defect periods differ between the ACT and NSW and depend on the type of defect, so check the deadline that applies to your building and act early. This is general information, not legal advice.

Swift Structural Solutions provides building defect inspections and reports for strata and commercial buildings across the ACT and NSW. Drone-assisted inspections are used where access is difficult.

Request an inspection: https://www.swiftstructuralsolutions.com.au

20/10/2026

Missing tiles at the base of a wall? Don't just glue them back.

These photos show what we found at the base of a rendered wall: plinth tiles that have debonded and fallen away, bare substrate underneath, and a section of render with an open void where water, debris and weeds can get in.

What this can mean:
- Water is getting behind the tiles and the render
- Failed waterproofing or flashing at the base of the wall
- Moisture reaching the wall cavity and the structure behind it

A tile that falls off is usually a symptom, not the problem. If the cause isn't found, repairs fail again and the damage spreads.

What to do:
1. Photograph and date it
2. Keep people clear of loose tiles and render
3. Report it in writing to your strata manager or building manager
4. Get the cause investigated before repairs

Swift Structural Solutions provides facade inspection, assessment, make safe and rectification works for strata and commercial buildings across the ACT and NSW. Drone-assisted inspections are used where access is difficult.

Request an inspection: https://www.swiftstructuralsolutions.com.au

18/10/2026

New from Swift Structural Solutions: drone-assisted facade and roof inspections.

Some parts of a building are hard, slow or risky to reach. Where that is the case, we use drones to survey facades, roofs and parapets, then our engineers review the imagery and mark up the defects.

What you get:
- High-resolution facade and roof imagery
- Defect mapping: cracking, staining, spalling, failed sealants and flashings
- Close-ups of problem areas
- A marked-up photo report with recommended next steps

Why it helps: less work at heights, faster coverage of tall elevations, less disruption, and a dated record you can compare over time.

To be clear, we use a drone where it adds value, alongside our standard inspections. A drone finds and locates visible defects. Where closer investigation is needed, we recommend hands-on testing.

Available across the ACT and NSW for strata managers, owners corporations, building managers, developers and property owners.

Details: https://www.swiftstructuralsolutions.com.au/drone-inspections

What is the hardest part of your building to inspect? Tell us in the comments.

17/10/2026

Got 10 minutes this Sunday? Spend them on your house.

Most expensive repairs start as small things nobody noticed on a busy weekend. Here is a quick walk-around you can do this afternoon:

1. Walk the perimeter: look for new cracks or ones that have widened
2. Check downpipes and gutters: clear, and discharging away from the walls
3. Look up: ceiling stains, bubbling or peeling paint
4. Wet areas: silicone and grout around showers and windows
5. Roof, from the ground: lifted tiles or sheeting (please do not climb up)
6. Photograph and date anything you find, with a coin or ruler for scale

Found something? Don't just fill it or paint over it. Covering a problem hides the evidence, and if the cause is still there it will come back. Get the cause checked first.

YOUR TURN: comment a number from 1 to 6 to tell us which one you'll check first. And tag someone who has been meaning to look at that crack or stain for months!

We're Swift Structural Solutions, chartered structural and remedial engineers. Not sure what you've found? Send us a message with a photo.

15/10/2026

Water stains on a ceiling are never "just a paint job".

These photos are from a recent site inspection of a covered passage where water has been getting in from above. Here is what we can see:

- Tide-mark staining and dark patches where water has pooled and dried
- Paint blistering and peeling away from the surface
- Open cracks along the joints between ceiling panels
- Areas where the render and board have broken away, exposing the layer underneath

Why it matters: water travels. The damage you can see is often a long way from where the water is actually getting in, and the longer it goes on, the more it can affect what is behind it, including corroding steel, deteriorating boards and mould.

Common culprits: failed roof or parapet flashings, cracked or open facade joints, tired balcony waterproofing, blocked drainage and poorly sealed penetrations.

If you are a strata manager, committee member or owner and you spot something like this:
1. Photograph it and note the date
2. Report it in writing
3. Don't just repaint, you will be paying twice
4. Get the source found before the repair is specified

We're Swift Structural Solutions, chartered structural and remedial engineers. We trace the source, design the repair and manage the works. Message us to arrange an inspection.

14/10/2026

Spotted a new crack in your wall after all this rain? Here's when to worry (and when not to).

Wet weather after a dry spell makes clay soils swell, and buildings move with them. That's why spring is crack season.

Most hairline cracks are harmless. But get an engineer to look if you see:
- a crack wider than about 5 mm, or one that's growing
- stepped or diagonal cracks through brickwork
- horizontal cracks
- cracks with leaks, rust staining, or doors and windows that suddenly stick
- a downpipe or drain dumping water at the base of the wall

What to do right now: take a photo with a coin or ruler for scale, write the date, and don't fill it yet. Sealing a moving crack hides the evidence and usually fails.

Swipe for real examples from a recent inspection of a brick apartment building.

We're Swift Structural Solutions, chartered structural and remedial engineers. Not sure about a crack in your building? Send us a message.

11/05/2026

Stop water damage before it starts. Bathroom entrances are prime spots for moisture to sneak through, especially at the threshold where repeated exposure can silently deteriorate timber jambs. A small oversight here can lead to major structural issues down the line. At Swift Structural Solutions, we focus on precision in waterproofing, sealing, and detailing to protect your property from costly remedial work. Trust the experts to get it right the first time.

25/04/2026

Did you know soil composition in our region can significantly impact your home's foundation over time? Areas with expansive clay soils are particularly prone to movement during wet and dry cycles, which can lead to cracking or uneven settling. To protect your property, ensure proper drainage away from the foundation and consider regular inspections to catch early signs of movement. Stay proactive and preserve your home's structural integrity for years to come.

13/04/2026

At our consulting firm, every project unfolds a unique narrative. Let's dive into the common issue of floor tiles delaminating from their substrate. It's crucial to ensure full adhesive coverage and optimal surface preparation to avoid such pitfalls. Our expert engineering team stresses the importance of professional guidance to prevent these issues, ensuring durability and elegance in every installation. Elevate your flooring projects with confidence and precision! 🏗️🔍

11/04/2026

Explore expert structural engineering solutions with Swift Structural Solutions. From initial inspection to project completion, we provide reliable and experienced consulting services under the Design and Building Practitioners Act. Visit our website to learn more and book your free consultation.

Address

Jerrabomberra Avenue
Narrabundah, ACT

Telephone

+61435204776

Website

https://swiftstructuralsolutions.com.au/

Alerts

Be the first to know and let us send you an email when Swift Structural Solutions posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Swift Structural Solutions:

Want your business to be the top-listed equipment service in Narrabundah?