Under Mirror Mounts 1400 GTR/Concours 14

29/04/2024

Updated link to my eBay store due to a glitch with my last listing on there. It would not allow me to restock sold out items.

https://www.ebay.com/itm/286433134521

Hopefully this should not be an issue for the future.

These brackets fit under the mirrors of all present model Kawasaki Concours 14 / 1400 GTR bikes (2007 to present). They are easily installed by replacing the existing M4 bolts (three under each mirror) with the supplied longer M4 bolts and washers.

21/10/2023

Shout out to Adam Luscombe for his unboxing and review. Love it mate.

02/06/2023

02/06/2023

In connection with Ed Ramberger and Michael Cox I have jumpedon board and will supply my Australian customers with a FOB cloning service.

FOB Cloning Information
Clones can be made from either the Spare (passive) FOB, or the back cover of your Active (battery) FOB. No matter which one you choose, the clone will function exactly as the Spare (passive) FOB does.

Whichever one you choose to have cloned, you will send exactly what is pictured for that choice.

Choice 1: Clone the Spare (passive) FOB. If cloning the Spare FOB, send only the FOB as shown below – not the key.

Choice 2: Clone the chip located in the back cover of the Active FOB. ONLY the back cover with the chip is needed – no keys or circuit boards should be sent. The chip is circled in the picture. Cloning this chip does not create an Active FOB – it creates a backup that functions exactly like the Spare (passive) FOB. If you choose this wrap the other half in stretch plastic to protect it and use as normal while waiting for you new chips and the back to be returned.

IMPORTANT: Prior to sending either the Spare (passive) FOB, or the back cover of the Active FOB for cloning, functionality must be tested. If you do not know how to do this, it will be explained to you prior to you mailing it.

Benefits of Cloning:
1) The clones are exact copies of the Spare (passive) FOB, or the chip located in the Active FOB case. The bike will not know the difference. This allows you to have as many copies as you like.
2) No dealer visit is required – no programming is required.

The new cloned FOB will be supplied in a 3D printed keyring as shown in the pictures.

Pricing will be as follows - 2x FOBs $75
- additional FOBs are $30 each

This pricing includes return postage with tracking

If interested and are located within Australia please contact me. USA and EU are serviced by Ed and Michael.

05/04/2023

Have listed the mounts on eBay for anyone located in the US

https://www.ebay.com/itm/285836674323

If you are located anywhere else in the world and would like a set just contact myself and I can arrange postage to your location.

These brackets fit under the mirrors of all present model Kawasaki Concours 14 / 1400 GTR bikes (2007 to present). They are easily installed by replacing the existing M4 bolts (three under each mirror) with the supplied longer M4 bolts and washers.

05/04/2023

Bolts have arrived so I am now in a position to start shipping mounts out again.

Will get a eBay listing up and running soon but will have to charge more of sold via eBay to cover the listing/sale fee eBay hits me with.

Send me a message if you want to get a set sent out at a cheaper than eBay price.

Will post the eBay link up as soon as I have them listed.

Cheers

Grant

27/03/2023

Link to fitting instructions of the mounts of required

26/03/2023

I have about 10 sets of mounts made and ready for shipping but as I was making up the bolts that are included I noticed I ordered the incorrect bolt head type.

I've managed to order the torx (star head) type instead of the hex key type. I have just ordered the correct head type but the delivery will be about 1 week.

Happy to ship with the torx head type, you will just need to ensure you have the correct bit to install them with. This bolt is used to attach your lights bracket to the mount, otherwise there will be about a further weeks wait until I can ship with the hex head type.

24/03/2023

Quick little update.

Have designed and made the required templates to make the mounts (still needs a little tweaking but they are at a stage I can make a batch to ship out)

Need to optimise the machine coding for the CNC as it still isn't where I would like it to be but is at a stage I can at least use it to make a batch.

Will hopefully be able to make up a few this weekend and have them ready for shipping next week, then I can work on optimising the work flow and better templates for future batches.

17/03/2023

Currently in the process of making new templates for the new machinery I had to purchase to make more mounts. Found this old video of the original method I used to make the mounts. I used wood as the template as I only originally planned on making 1 or 2 mounts for a friend.

12/03/2023

Due to more demand for the under mirror light mounts and people not knowing exactly where to obtain them from I have decided to create this page so people can contact me easier.

At the moment I have no mounts in stock but am in the process of sourcing more materials and tools to make more. I unfortunately had to sell the majority of the tools I used to make the mounts due to moving house but am now once again in a position to make more. I originally was not going to make anymore but demand for them has made me change my mind.

At this point I am still waiting for some machines to arrive that I use to make them. Further to that I need to make the templates used to suit the new machines. I expect it to be a month or so until I have any mounts ready but will keep this page updated with when they are ready.

Grant