Kingspan Insulation Australia

Kingspan Insulation Australia Kingspan Insulation is a leading manufacturer of innovative ultra-thin flexible insulation products

Australia’s affordable housing challenge will not be solved by one part of the industry alone.It requires collaboration ...
16/06/2026

Australia’s affordable housing challenge will not be solved by one part of the industry alone.

It requires collaboration across government, community housing, development, design, construction and investment.

That is why Kingspan is proud to be an official exhibitor at the 11th Annual Affordable Housing Development & Investment Summit, taking place at CENTREPIECE at Melbourne Park on 17 and 18 June 2026.

The summit brings together stakeholders from across the housing sector to explore practical pathways for delivering more affordable, resilient and energy-efficient homes.

For Kingspan, this conversation closely aligns with our residential building envelope solutions, including rigid insulation boards, wall wraps and roof sarking. When specified and installed as part of a considered system, these materials can help improve thermal performance, reduce energy demand, moisture management and support more comfortable homes over the long term.

Attending the summit? Visit us at Stand 20 to meet the us and discuss how better-performing building envelopes can contribute to the future of Australian housing.

Cairns builders, we’ll see you at the Cairns Hardware Trade Expo.Kingspan Insulation Australia is heading to trade expo ...
16/06/2026

Cairns builders, we’ll see you at the Cairns Hardware Trade Expo.

Kingspan Insulation Australia is heading to trade expo on Thursday 18 June at the Cairns Convention Centre, and we’re looking forward to catching up with the local trade community.

Come and say hello to Gail Young, Area Sales Manager, and David Smyth, General Manager Sales at our stand.

They’ll be ready to answer your questions around Thermal performance in residential construction, Building higher energy rating homes, Choosing the right insulation and membrane combination and Improving comfort and performance in warm, humid climates like Far North Queensland.

We’ll be showcasing a range of residential solutions, including rigid board insulation, flexible insulation rolls, and roof and wall wraps.

When used as a part of a considered building envelope, these products can help support homes that are better insulated, more comfortable, and built to perform over the long term.

We’re looking forward to seeing familiar faces, meeting new ones, and talking about practical ways to improve building performance in Queensland and beyond. Drop by, say hi.

https://eu1.hubs.ly/H0wcb4b0)

Insulation 101 is happening tomorrow, Friday! And this is one session worth making time for.The first webinar in the Kin...
28/05/2026

Insulation 101 is happening tomorrow, Friday! And this is one session worth making time for.

The first webinar in the Kingspan Digital Academy Industry Exchange Series starts with the fundamentals of insulation, led by Alice Berti from Kingspan.

Because while insulation is central to building performance, its role is often simplified or overlooked.

This session will go beyond the basics, with Reza Karani and Ruifong Ong from Jensen Hughes Pacific also sharing practical insight into the key compliance and design considerations relevant to insulation materials in the Australian built environment.

Our partners from Jensen Hughes will talk about NCC fire hazard property requirements for insulation materials, fire testing methods used to assess material performance, NCC energy efficiency requirements, compliance and sustainability pathways including NCC J1V3, Green Star, BASIX, NatHERS, NABERS, WELL, circular economy principles and other sustainable environmental design frameworks

The session qualifies for 1 formal CPD point.

Registrations are still open, so register your interest if you have not already.

You will not regret revisiting one of the most important fundamentals behind better building performance outcomes. https://eu1.hubs.ly/H0vHfWM0

21/05/2026

When we talk about “Australian Made”, we often focus on the product. But the real story is the people behind it.

The factory teams starting before sunrise.
The engineers refining performance.
The warehouse staff keeping supply moving.
The contractors and installers delivering projects on tight deadlines.

Manufacturing in Australia has always been about resilience, adaptability, and problem-solving.

And despite global uncertainty, local manufacturing continues to play a critical role in supporting Australian jobs, industry capability, and supply chain confidence.

Research from the Australian Made Campaign shows that even small shifts toward buying Australian Made products can have a significant impact on jobs and the economy.

That’s why Australian Made Week matters.

It’s a chance to recognise the people working behind the scenes across factories, construction sites, warehouses, and businesses around the country.

At Kingspan Insulation Australia, we’re proud that our insulation is a part of that story, but we are even more proud of the people who make it possible.

And sometimes… that includes helping an unexpected visitor find its way safely back outside. 🦘 😂

Because Australian manufacturing doesn’t get much more local than that.

Australian Made Campaign

Australia’s climate demands building solutions designed for Australian conditions.Australia is one of the harshest clima...
19/05/2026

Australia’s climate demands building solutions designed for Australian conditions.
Australia is one of the harshest climates on Earth. Our buildings feel it every day.
☀️🌧️❄️
From tropical humidity in the north to freezing winters in alpine regions, Australia pushes buildings to perform across some of the world’s most varied climate conditions.

That’s why insulation in Australia is so important. It helps buildings manage:
• heat
• condensation
• energy efficiency
• occupant comfort
• long-term performance

And it needs to do it in real Australian conditions. That’s part of why Australian manufacturing matters.

Products made locally are developed with Australian climate zones, compliance requirements, and construction practices in mind. They are designed for the environments builders and designers work in every day.

During Australian Made Week, it’s worth recognising that the green-and-gold kangaroo is not only a symbol of local manufacturing. It’s also a symbol of solutions built for Australian conditions.

We’re proud that Kooltherm®, AIR-CELL®, and Therma™ flat boards are Australian Made certified, supporting local manufacturing while helping projects meet building performance expectations. Because better buildings start with the right products.

Australian Made Campaign

How do you help Australians instantly recognise products that are genuinely made here?In 1986, the answer became one of ...
18/05/2026

How do you help Australians instantly recognise products that are genuinely made here?

In 1986, the answer became one of the country’s most recognisable symbols.
The green-and-gold kangaroo logo.

Forty years later, the Australian Made logo is recognised by almost every Australian and appears on thousands of products across industries ranging from construction to agriculture, healthcare, food, and manufacturing.

In construction, that matters a lot.
Because every product specified into a building becomes part of a much bigger story around performance, reliability, compliance, and trust.

This Australian Made Week, we’re proud that our Kooltherm®, AIR-CELL® and Therma™ flat board ranges carry Australian Made certification.

Not because it’s a marketing badge. But because the logo represents something Australians have backed for four decades: products made for Australian conditions.

Forty years on, the kangaroo is still jumping off shelves, specifications, and job sites across Australia.
Click here to view our products: https://eu1.hubs.ly/H0vk6-g0

Australian Made Campaign

A couple of weeks ago, our State Sales Manager Scott Kenna travelled to Nadi, Fiji for a client appreciation night hoste...
14/05/2026

A couple of weeks ago, our State Sales Manager Scott Kenna travelled to Nadi, Fiji for a client appreciation night hosted by Roofing and Profiles, and it was a brilliant evening! 🌴

The room was filled with builders, architects, specifiers, resort managers, and sales professionals all coming together to connect and share ideas. Scott brought along our Kingspan AIR-CELL samples, which sparked some fantastic conversations about local project needs and how we can best support the Fijian market.

It's always great to get face-to-face with the people shaping the built environment in a market outside of Australia. A big thank you to Roofing and Profiles for bringing the industry together, looking forward to what comes from these connections! 🤝

There’s a big difference between reading about a roofing system… and seeing it installed live on site.Our team recently ...
13/05/2026

There’s a big difference between reading about a roofing system… and seeing it installed live on site.

Our team recently spent time with Fatra Australia during their demo day, focusing on warm roof systems in a mechanically fixed application. And it reinforced something we strongly believe at Kingspan Insulation Australia: Real understanding comes from hands-on experience.

Watching the full installation process unfold in real time gives contractors, builders and specifiers a level of insight that no brochure, presentation or product image can fully replicate. From fixing methods to detailing and sequencing, live demonstrations help turn theory into confidence on site.

We’re proud to work closely with partners like Fatra who are equally committed to education, collaboration and raising industry knowledge across the roofing sector.
If you’ve never attended a live roofing demonstration before, we highly recommend it.
And if you’d like to see a warm roof system installation up close, get in touch with our team. We’d be happy to help arrange a live demo experience. https://eu1.hubs.ly/H0vgVZd0

Weather protection and airtightness play a critical role in how buildings perform over time.Thermakraft wall and roof wr...
07/05/2026

Weather protection and airtightness play a critical role in how buildings perform over time.

Thermakraft wall and roof wraps are designed to support that performance, balancing moisture management, durability and buildability across residential and commercial projects.

Watergate Plus is a Class 4 vapour permeable wall membrane, acting as a barrier to air and water while supporting thermal efficiency.

Covertek 409 is a heavy-duty roof membrane with high tensile strength and edge tear resistance, designed to deliver a weathertight build.

Both solutions are NCC compliant, fire retardant and developed for Australian conditions, helping project teams manage moisture while maintaining envelope integrity.

Custom printing is also available, allowing branding to be integrated directly onto the membrane for added on-site visibility for your company.

If you are working on wall or roof assemblies and want to understand how these membranes fit into your system, explore the full details here: https://eu1.hubs.ly/H0v3Tnw0

We’re pleased to be part of Mass Timber Central, a new industry hub launched in Melbourne last week. Created by Vistek S...
06/05/2026

We’re pleased to be part of Mass Timber Central, a new industry hub launched in Melbourne last week.

Created by Vistek Structural Engineers, the space brings together real-world assemblies to help architects, developers, builders and consultants understand how mass timber buildings come together in practice.

From acoustics and moisture management to fire performance, structural connections and building envelope solutions, the hub offers a hands-on way to explore key systems in one place.

We’re proud to have Kingspan Therma PIR boards featured as part of a warm roof system alongside Soprema waterproofing membranes, demonstrating how these solutions support high-performance mass timber construction.

A few moments from the launch evening below.

Structural Engineers Svars Robb

Address

25 Oherns Road
Melbourne, VIC
3062

Opening Hours

Monday 9am - 5pm
Tuesday 9am - 5pm
Wednesday 9am - 5pm
Thursday 9am - 5pm
Friday 9am - 5pm

Telephone

+611300247235

Website

Alerts

Be the first to know and let us send you an email when Kingspan Insulation Australia posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share