Santo Engineering

Name: Santo Engineering
Address: 402/585 Little Collins Street, Melbourne, VIC, 3000, AU
Telephone: +61399997323

Home
Australia
Melbourne, VIC
Santo Engineering

Creative, value led engineering solutions for an ever changing world. Instagram:

13/03/2025

A seven-storey mixed-use building, positioned on a narrow site, packed with an array of structural design features. A ground-floor retail, six storeys of office, suspended post tensioned slabs, precast walls and columns, lateral seismic and wind analysis, an expansive roof top terrace with excellent views, on a sensitive multi-level basement carpark retention system, with consideration to adjoining structures. provided full structural engineering design and construction phase services

Project: Johnston St, Abbotsford
www.santoeng.com⁠⁠⁠

-use

02/03/2025

A luxurious modular home built off site, ideal for this complex sloping site, designed to capture the breathtaking costal views. Specialist geotechnical slope stability modelling was required to design a retention system into igneous rock to safely support the modular structure above provided full structural design and geotechnical services.

Project: Kioloa House, NSW
www.santoeng.com⁠⁠⁠

06/09/2024

The Golden Plains Wind Farm project involves the establishment of a wind energy facility including wind turbines and associated electrical infrastructure on 16,739 ha. The site is located on land that is primarily used for agricultural purposes and has been substantially modified over time due to agricultural operations such as broad acre cropping and livestock grazing. successfully provided civil drainage engineering services for the proposed Workshops, Offices, and Hardstand.

Project: Golden Plains Wind Farm, Rokewood
www.santoeng.com⁠⁠⁠

09/08/2024

A home with rejuvenating heritage features of a +130yr old Victorian single front house. Where everything has its place, a space that unfolds with ease of navigation and flow between spaces for functionality. provided full structural design, a main feature was to support the original chimney which formed part of the rooftop architecture.

Project: Mark St, Fitzroy North
Architect:
www.santoeng.com⁠⁠⁠

02/08/2024

Boronia Junction Childcare Centre was built from an existing Ten Pin Bowling Centre with a build cost of approximately $6M. A challenging aspect of the development was to retain the existing steelwork roof trusses and removing the existing roof sheeting to create an outdoor open space. successfully provided full structural and civil engineering services.

Project: Boronia Junction Childcare, Boronia
www.santoeng.com⁠⁠⁠

24/07/2024

Seven Buildings for Office, Retail, or Medical purposes. Each building includes their own private garage with 6 car spaces. A challenging aspect to the structural design was to analyse the overall lateral stability of the structure to achieve the required open spaces. successfully provided full structural and civil engineering services.

Project: Office/Retail Building, Watsonia
www.santoeng.com⁠⁠⁠

14/02/2024

Sunbury Square Shopping Centre alterations consists of new major structural upgrades and forensic investigations of the existing structure following the nearby earthquake. successfully provided full structural engineering and forensic services.

Project: Sunbury Square Shopping Centre, Sunbury
www.santoeng.com⁠⁠⁠

29/01/2024

Boronia Junction Shopping Centre Carpark upgrade consists of civil drainage 3D modelling to blend in with the existing carpark pavement, and new retaining walls. successfully provided full structural and civil engineering services.

Project: Boronia Junction Shopping Centre, Boronia
www.santoeng.com⁠⁠⁠

22/01/2024

Heritage Shopping Centre upgrade consists of large spanning structural steelwork design, and civil drainage 3D modelling to blend in with the existing carpark pavement, to meet the architectural intent. successfully provided full structural and civil engineering services.

Project: Heritage Shopping Centre, Pakenham
www.santoeng.com⁠⁠⁠

19/01/2024

An architectural ‘butterfly-shaped’ awning. Structurally designed to cantilever with a wingspan of 10 meters, is clad with photo-voltaic solar panels, and covers 40 carparks, it also includes Electric Vehicle (EV) fast chargers.

The potential for flooding at the site was a major consideration of the design, the structure has been engineered to withstand these flood depths and velocities, including an allowance for debris build up. provided full structural engineering design services.

Project: Clyde Campbell Solar Carpark, Lismore NSW
www.santoeng.com⁠⁠⁠

20/11/2023

This multi-unit development consists of eighteen triple storey townhouse buildings. The structure compromises of conventional timber and steelwork framed construction, supported on a stiffened concrete raft slab. Creative protection works details were required along the boundary to protect the neighbouring structures. provided full structural and civil engineering design services.

Project: Cramer Street, Preston
www.santoeng.com⁠⁠⁠

28/10/2021

This solar panel system is expected to reduce the College’s annual electricity consumption by over a third, and save 200 tonnes of CO2 – which is equal to eliminating 60,000km of driving - over 10 years. assessed the existing structures, designed and certified the solar panel installations.

Project: Marymede Catholic College, South Morang
www.santoeng.com⁠⁠⁠

Address

402/585 Little Collins Street
Melbourne, VIC
3000

Telephone

+61399997323

Website

http://www.santoeng.com/

Alerts

Be the first to know and let us send you an email when Santo Engineering posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Santo Engineering:

Want your business to be the top-listed Equipment Service in Melbourne?