Blockhead Engine Heaters

Blockhead Engine Heaters Blockhead Engine Heaters by Blockhead industries, built for over 10yrs and used by the best ๐Ÿ‡ฆ๐Ÿ‡บ ๐Ÿ‡บ๐Ÿ‡ธwide You want it we can set it.

Never race with a cold engine again, Blockhead Engine Heaters for all your engine heating needs. Blockhead Engine Heaters are designed for all forms of Motorsports. Its designed to pre-heat your engine before you turn it over to race and keep it up to temperature between races. The heating unit is digitally controlled via a temperature controller to get your motor hot to a temperature not greater

than 200 degreesF. The Electric unit contains:
- 2400 watt heating element (10amp) 0r
3000 watt heating element (12.5amps)
- 12vdc pump
- Digital temperature controller
- 1.2 metre lines with quick disconnect fittings

Price: $1650 Plus Freight. Contact for any enquries
Adam McDermott 0421740524
Email [email protected]

Blockhead spent the afternoon at Hancock Racing in Newcastle plumbing up a Blockhead oil heater, on their immaculate Mus...
12/02/2026

Blockhead spent the afternoon at Hancock Racing in Newcastle plumbing up a Blockhead oil heater, on their immaculate Mustang driven by Steven Johnson in the series.
The oil heater is commonly used in the V8 supercar series and now has transitioned from its use on transaxles to 9inch differentials. Heating the housing and diff tubes to approx 80-85C.
Good luck to the team for the upcoming season starting in 2 weeks at Sydney Motorsport Park. Reach out to Blockhead if this oil heater application could benefit your team.

It has been a busy month of January at Blockhead with the  off season and teams sending Diesel Water heaters and Transax...
05/02/2026

It has been a busy month of January at Blockhead with the off season and teams sending Diesel Water heaters and Transaxle Oil heaters back for servicing in preparation for the season starting later in February + several new builds for speedway teams for their busy month of January racing. Good luck to and for the upcoming season.

Danny Hill and his Roush Yates Phase 5 Falcon at Targa Tasmania starting yesterday using a Blockhead Electric Coolant he...
16/11/2025

Danny Hill and his Roush Yates Phase 5 Falcon at Targa Tasmania starting yesterday using a Blockhead Electric Coolant heater.

He reached out as they were looking add to their engine pre-heating package and also to control the oil heating in their dry sump. The Electric Coolant heater was a great option for his team.

Blockhead designed a custom digital controller box to mount next to the dry sump tank in the rear of the Falcon. This always Danny to pre-heat his oil safely and not have to constantly monitor the heater and burn the oil.

Good luck to Danny and his team this week. ๐Ÿ

If you have any questions regarding custom controller units or water/oil heating products. Send us a message, so we can discuss your needs.



๐Ÿ—ฃ๏ธ๐Ÿ—ฃ๏ธ๐Ÿ—ฃ๏ธ๐Ÿ—ฃ๏ธAttention Western Australia Customers:I will be in Perth the 26th/27th of November servicing and upgrading heate...
11/11/2025

๐Ÿ—ฃ๏ธ๐Ÿ—ฃ๏ธ๐Ÿ—ฃ๏ธ๐Ÿ—ฃ๏ธ
Attention Western Australia Customers:

I will be in Perth the 26th/27th of November servicing and upgrading heaters at a local workshop 20 minutes from the airport.

If you have a Diesel or Electric water heater you would like serviced, changed or any other heater work. Please send thru a message or give blockhead a call so we can arrange to get your heater looked at.

TIA Adam @ Blockhead

Congrats to Jackson Delamont Motorsport and his team on the WIN last Saturday at Canberras ACT Speedway.Jackson and his ...
10/11/2025

Congrats to Jackson Delamont Motorsport and his team on the WIN last Saturday at Canberras ACT Speedway.

Jackson and his team are long time customers of Blockhead Engine Heaters. In the photos you can see they are now using the recently upgraded design of Blockhead Diesel Engine Heater box in the Mad Harryโ€™s Iconic red.

The newly designed box is more compact, side mount hose holder and right hand side crash bar mount. The heater still retains the cover over the controls to assist with keeping dust out. Hose holder easily removed if cupboard space is short. (Note: previous design on wheel still available)

One of the bigger changes is that the heater has had a temperature upgrade. The new units have an approx. heating temperature of 195F - 200F. This upgrade is also available to all unit purchased start of 2020 onwards.

If you have any questions regarding any of Blockhead products, donโ€™t hesitate to give us a call, email or send us a message.



Cam from Reliable Race Solutions designing an awesome additional heating tank package, to mount on one our Electric Engi...
08/11/2025

Cam from Reliable Race Solutions designing an awesome additional heating tank package, to mount on one our Electric Engine heaters.

This nice set up is going to work well in Warspeed Industries engine room.

The team at  got in contact recently regarding their Transaxle heating program.Several emails backwards and forwards has...
12/09/2025

The team at got in contact recently regarding their Transaxle heating program.
Several emails backwards and forwards has lead to the team using one of Blockheads Oil heaters to increase heating temps prior to on track action this weekend at for the Airtouch500.

If you would like to get behind a great team and the fastest late model on the east coast. Get in contact with Daniel Ca...
09/07/2025

If you would like to get behind a great team and the fastest late model on the east coast. Get in contact with Daniel Cassidy Racing.

Daniel has proven to be a great ambassador for Blockhead Engine Heaters ๐Ÿ‘

EXPRESSIONS OF INTEREST - Daniel Cassidy: Coming off a successful 2024-25 season campaign in Late Models, Daniel Cassidy and his team are currently in the process of securing their 2025-26 season sponsors.

This is the perfect opportunity to join your business with NSW's leading Late Model team and their talented driver Daniel Cassidy.

For more information about sponsoring Daniel and the team, please contact Daniel Cassidy on 0423 413 355 (mobile) or [email protected] (email).

08/07/2025
26/06/2025

Starter motor or No Starter Motor, pre heating your engine allows you to get on the gas sooner. ๐ŸŽ๏ธ๐ŸŽ๏ธ๐Ÿ’จ๐Ÿ’จ

What a season by Daniel Cassidy Racing!!Congrats to Daniel and his entire team on the great results and amazing season. ...
23/06/2025

What a season by Daniel Cassidy Racing!!

Congrats to Daniel and his entire team on the great results and amazing season. ๐Ÿ๐Ÿ

Address

Maitland, NSW
2320

Telephone

+61421740524

Website

Alerts

Be the first to know and let us send you an email when Blockhead Engine Heaters posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Blockhead Engine Heaters:

Share