JMC Engine Machining

JMC Engine Machining JMC Engine Machining provides services and repairs to rebuild petrol,diesel and performance engines

This thing is next level🥵. BMW S58 with a stroker kit and LA sleeves. What we did?✅ Align hone with ARP main studs✅ Mac...
24/03/2026

This thing is next level🥵. BMW S58 with a stroker kit and LA sleeves.

What we did?
✅ Align hone with ARP main studs
✅ Machined the block to fit the LA flanged style sleeves
✅The Torque plate was cut out thanks to . And then finished machined
✅The stroker crank and rotating assembly was balanced
✅The torque plate was installed with the 625+ ARP head studs for the final hone
✅Then the block was decked

Very keen to see what can do with this one💪🏽

Gav’s very tidy little 347 Windsor going in his XM coupe. Getting all sorts of goodies.✅Started off boring the block 030...
07/03/2026

Gav’s very tidy little 347 Windsor going in his XM coupe. Getting all sorts of goodies.

✅Started off boring the block 030 O/S. Followed by a torque plate hone.
✅The S**t Stroker kit was balanced by Pete 👌🏽
✅Block was then align honed with a steel girdle and ARP main studs
✅The stoker kit was dummied up in the block to determine the deck heights
✅The deck was then machined and corrected to a Zero deck
✅Cam bearings installed
✅Bearing clearances were set
✅Edelbrock Performer heads seats were recut and port matched to intake manifold
✅Heads were faced to bump up the comp to 10.6:1
✅Onto final assembly
✅Degreeing in the Crow hydraulic roller Cam with a set of gaterman lifters
✅Meilings oil pump with ARP drive
✅Cometic MLS head gaskets held in with ARP head bolts
✅Comp roller rockers
✅Then the outside with TruTracs Billetspecialties serpentine belt set ✨
✅Milodon sump
✅Edelbrock throttle body
✅And of course will be wired up with a Holley EFI Terminator X ECU and Dizzy

Should make for a pretty killa cruiser👌🏽

06/03/2026

The VDJ is alive 💪🏽

2 sets of steel 4 bolt main caps installed in a row. On a couple 308 holden👌🏽✅
26/02/2026

2 sets of steel 4 bolt main caps installed in a row. On a couple 308 holden👌🏽✅

Extended keyways on a couple L8T cranks👌🏽
12/02/2026

Extended keyways on a couple L8T cranks👌🏽

Andrew’s 1vd out of his 200 series👌🏽Bore/hone✅Deck✅Head service✅Acid bath✅Crank grind✅Little end bushes✅All genuine pist...
09/02/2026

Andrew’s 1vd out of his 200 series👌🏽

Bore/hone✅
Deck✅
Head service✅
Acid bath✅
Crank grind✅
Little end bushes✅
All genuine pistons and gaskets✅
Denso injectors✅

Cheers to 3V Performance for helping us get our newest team member over to Australia. Pretty keen to get it powered up
07/02/2026

Cheers to 3V Performance for helping us get our newest team member over to Australia. Pretty keen to get it powered up

Last one for the year🎉 Matt’s FTE getting a full make over with ARP head studs, new +30 injectors and all genuine piston...
24/12/2025

Last one for the year🎉 Matt’s FTE getting a full make over with ARP head studs, new +30 injectors and all genuine pistons and gaskets throughout.

Thanks everyone for a great year and hope everyone has a bloody good Christmas and we’ll see you in the new year👍🏽🍻🍻

First time seeing/working on one of Darts 2JZ blocks. What a beefy block of case iron, will be keen to see plenty more. ...
09/12/2025

First time seeing/working on one of Darts 2JZ blocks. What a beefy block of case iron, will be keen to see plenty more.
Getting some Fire rings to go with it 🔥🔥

And another 💪🏽
05/12/2025

And another 💪🏽

The last bit of the K-series puzzles (for me😂). This 4 Piston head getting dry decked, drilled for 1/2 head studs, exhau...
23/10/2025

The last bit of the K-series puzzles (for me😂). This 4 Piston head getting dry decked, drilled for 1/2 head studs, exhaust valves upgraded to a 6.5mm stem from a 5.5mm stem and valves seats cut.

All cleaned up ready to bolt on that billet bullets block👌🏽

Address

9/6 Hayley Street
Maddington, WA
6109

Opening Hours

Monday 8am - 5pm
Tuesday 8am - 5pm
Wednesday 8am - 5pm
Thursday 8am - 5pm
Friday 8am - 5pm

Telephone

+61462055716

Website

Alerts

Be the first to know and let us send you an email when JMC Engine Machining posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to JMC Engine Machining:

Shortcuts

Share

Category