Precision Fabrication Mackay

Precision Fabrication Mackay In house or on site welding and fabrication, Mackay and surrounding
(1)

21/02/2024

Due to unforeseen personal family reasons I have unfortunately had to close shop in Mackay and move back to Western Australia.

Thanks to those who supported us while we were in Mackay.

If the right time ever comes up again we will definitely return to Mackay, till then we may re name the page/business and trade in WA part time.

Thanks again Mackay
Mick

We are now taking on work for 2024.If you have any welding or fabrication or machinery repair jobs you would like to run...
03/01/2024

We are now taking on work for 2024.

If you have any welding or fabrication or machinery repair jobs you would like to run by us feel free to get in contact with us either via phone or message the page.

Mick 0428 826 174

Here is a custom bar we completed a little while ago. 2100mmx2700mm it’s not shy on him to fit plenty of lads or ladies ...
15/12/2023

Here is a custom bar we completed a little while ago.

2100mmx2700mm it’s not shy on him to fit plenty of lads or ladies around it.

The top we did with Mackay cedar and sheeted it with some recycled iron.

For any welding/fabrication or repairs feel free to PM the page or call Mick 0428 826 173

A recently completed project. This pump trailer started as an unfinished project purchased off Facebook, it was just the...
15/12/2023

A recently completed project.

This pump trailer started as an unfinished project purchased off Facebook, it was just the rolling trailer with the engine and pump mounted.

We started by modifying the hitch to suit a 50mm ball, fitting a jockey wheel and moving the suspension hangers so the rocker suspension worked.
We then made a 75x75 frame to support the roof and 380ltr fuel tank that hangs under the roof, made up a frame and mounted the Murphy control panel, made up new exhaust pipe work to suit a new location, made a rock guard for the radiator, fitted taillights and lastly finished it with some chunky 3mm guards.

For any welding/fabrication and repairs fell free to message the page or call Mick 0428 826 173

We have been busy lately with a lot of contract labor hire and working on a couple large projects in the workshop so jus...
13/11/2023

We have been busy lately with a lot of contract labor hire and working on a couple large projects in the workshop so just haven’t had the time to post on socials, sorry those that follow the page about the lack of content.

Here is a set of ripper boots I just finished hard facing for longevity in our hash environment.

There will be another post update on what we have been up to in the coming days but till then as usual feel free to get in touch for any welding and fabrication jobs you need done.

📞 Mick 0428 826 173
Or PM the page

A customer came to us with a trailer they wanted modified. We started by removing the shs tie down rails and added some ...
03/05/2023

A customer came to us with a trailer they wanted modified.

We started by removing the shs tie down rails and added some new 15nb tube rails, removed the old hinges for the sides he no longer has. Welded in 8 flush mount tie down points and made a 250mm headboard so he can load his buggy without the fear of going to far.

Feel free to get in touch for any trailer modifications or repairs you may have in mind.

It’s been a while since the last update on the land plane so I thought I’d let everyone in on where it’s at. A few weeks...
23/04/2023

It’s been a while since the last update on the land plane so I thought I’d let everyone in on where it’s at.

A few weeks ago I rebuilt the scoop, removing the old worn cutting edge that was welded on and had started rusting out. Cutting the mould board back to where I could then add in new material I drilled out to take the new cutting edge. Cut and replaced the side wings to suit the new depth of the scoop.

And last week I finally got the rest of the parts to fit a new centre pivot and ram assembly, which is going to allow the operator a lot more versatility with this land plane than just levelling flat areas.

If you have any machinery or welding/fabrication jobs you would like us to have a look at feel free to message the page of call Mick 0428826173.

Hi Mackay boaters,Precision Fabrication Mackay is here to offer our services for all your aluminium and stainless boat r...
25/03/2023

Hi Mackay boaters,

Precision Fabrication Mackay is here to offer our services for all your aluminium and stainless boat repairs/modifications and trailer repairs or rebuilds.

If it’s bringing your leaking boat back up to sea worthy condition or finally do that modification you’ve been wanting to do getting in touch with us at Precision Fabrication Mackay.

We have been working in WA previously with years of experience in the industry, ranging from repairing and modifying fishing vessels, to transfer vessel mobs and deck modifications, and ship building for Austal Ships Henderson.
We pride ourselves on giving our customers the quality so feel free to get in touch to discuss your next project.

Thanks for your time and look forward to working with and supporting the local Mackay Boating community.

Well the little UNI MIG 185 has been doing me proud lately, it’s been used as a MIG and STICK welder the last week and a...
10/03/2023

Well the little UNI MIG 185 has been doing me proud lately, it’s been used as a MIG and STICK welder the last week and any fabricator will tell you their most hated material to weld is Galvanised steel.

These Rotary Rake deflectors I made up today as a replacement for a customer than bent the originals up on the weekend came up a treat.

Yesterday afternoon we got a call from one of our regular customers with a breakdown they wanted done today. The job sta...
05/03/2023

Yesterday afternoon we got a call from one of our regular customers with a breakdown they wanted done today.

The job started with cutting apart an old hitch, then fabricating a new hitch to mate a smaller scoop to the tractor.

Keeping our repeat customers happy ✅ 

Return customer has decided to start on some modifications to his small land plain, stage one was to change the hitch to...
17/02/2023

Return customer has decided to start on some modifications to his small land plain, stage one was to change the hitch to a 70mm ball matching the height requirements on his little John Deere tractor and add a wind up leg.

Lots more to come in the coming weeks for this project so watch this space.

WE ARE OPEN!!First job since landing in town was to replace the old rusted out pipe work on an irrigation plant trailer....
28/01/2023

WE ARE OPEN!!

First job since landing in town was to replace the old rusted out pipe work on an irrigation plant trailer. We decided to use heavy wall pipe for longevity instead of galvanised pipe for this job and now they are off to be galvanised.

Address

Mackay, QLD

Opening Hours

Monday 6am - 6pm
Tuesday 6am - 6pm
Wednesday 6am - 6pm
Thursday 6am - 6pm
Friday 6am - 6pm
Saturday 6am - 3pm

Website

Alerts

Be the first to know and let us send you an email when Precision Fabrication Mackay posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Share