Performance Exhaust Nationwide

Home
Australia
Knoxfield, VIC
Performance Exhaust Nationwide

We are the home of the best brands and can help you select the right exhaust system for your vehicle
(1)

With almost 100 years of automotive experience we are able to provide you the best advice so that you can get your desired result. We can professionally install at our Knoxfield location or ship direct to you to have some fun at home. Check out www.performanceexhaust.com.au, or get in touch if you're looking for some expert advice on your exhaust system.

09/09/2026

Thinking about a VAREX system but unsure what each button does? 🔊

Here’s a quick run-through of how to use your XForce VAREX remote and switch between exhaust modes.

Whether you want to keep things quiet or open it up when the time is right, the remote gives you control at the press of a button 🔥

Save this one for later or send it to someone running a VAREX setup.

08/09/2026

One of the most popular turbo choices for serious street and performance builds - the Turbosmart TS-1 6870 delivers the response, flow and power potential enthusiasts are chasing. 🔥

Rated for 875–1035HP, the TS-1 6870 combines Turbosmart’s ultra-low rotating mass, dual ceramic bearing system and aggressive compressor aerodynamics to deliver exceptional transient response without sacrificing top-end power.

✅ 68mm compressor inducer
✅ 70mm turbine exducer
✅ T4 0.96 A/R
✅ Externally wastegated
✅ Dual ceramic bearing system
✅ Oil cooled
✅ Up to 1035HP

Smaller. Lighter. Faster.

If you're building a tough street car, drag setup or high-horsepower performance package, the TS-1 6870 is a serious piece of gear.

Available now from Performance Exhaust.

03/09/2026

The Next Gen Ranger/Everest already looks tough from factory - but the right front bar completely changes the way the whole ute sits.

The PIAK Genesis Non-Loop Bar gives you a cleaner, more aggressive front end without the bulky look of a traditional loop bar.

Built from high-strength steel with strong side protection, integrated underbody protection and 8,000kg-rated recovery points, it’s made to look sharp while still being properly functional off-road.

✅ Slim-fitting design
✅ Winch compatible up to 10,000lb
✅ 8,000kg-rated recovery points
✅ ADR compliant & airbag compatible
✅ Multiple colour combinations available

Suits Ford Ranger/Next Gen PY Next Gen from March 2022 onward.

From $3,175.00

02/09/2026

Wake up your AU V8. 🔥

The MANTA 1 3/4" Tuned Extractors are built for 1998–2002 Ford Falcon AU V8 Sedan & Ute models, helping improve exhaust flow, performance and sound.

✅ 1 3/4" Primaries
✅ 4-Into-1 Tuned Design
✅ 3" Outlet
✅ Mandrel Bent
✅ Direct bolt-on with MANTA High Flow Cats

FX-201 | $1,582.00
Available now from Performance Exhaust.

01/09/2026

Hilux owners! This one’s worth keeping an eye on. 👀

Manta Performance is getting ready to release its new 4” Toyota Hilux exhaust range, and we’ll have them available through Performance Exhaust as soon as they land.

There’ll be a number of different setups available, from simple DPF-back systems right through to complete turbo-back options with mufflers, WOM and hi-flow cats.

Built here in Australia, the new systems have been designed around the things that matter on a Hilux - good ground clearance, proper fitment, durability, flow and that unmistakable Manta sound.

If you’ve been waiting for a proper 4” exhaust option for your Hilux, you won’t have much longer to wait.

Want us to message you as soon as they become available?

Send us a DM and we’ll keep you in the loop. 🔥

31/08/2026

The FG GT already has one of the best ingredients Ford ever gave us.... a supercharged V8 that sounds seriously good straight from the factory.

The problem is, like so many performance cars, the factory exhaust keeps a lot of that character bottled up.

That’s where a proper exhaust changes the whole personality of the car.

This FG GT is now running a Manta Twin 3” Cat Back, letting that V8 breathe and bringing out the deeper, harder-edged note that was always hiding underneath.

No need to overcomplicate it.

Just a great Australian performance car, a supercharged V8, and an exhaust that finally lets you hear it properly. 🔊🔥

Turn the volume up and have a listen.

28/08/2026

Building a custom 2.5" exhaust?

This new XFORCE Megaflow muffler gives you a compact 10" x 4" oval body, 14" overall length and Offset/Centre layout - all wrapped in brushed 304 stainless steel.

Simple, quality hardware for custom fabrication without overcomplicating the job.

VX05-1463
$150.00 | In Stock now!

27/08/2026

There’s always that one section of an exhaust build where a normal bend just doesn’t quite give you enough room to make it work properly.

That’s exactly where a donut comes into its own.

Our new 5" (127mm) x 360° Mandrel Bend Donut gives fabricators the freedom to cut exactly the section they need, create tighter routing and build around spaces where off-the-shelf bends just won’t cooperate.

Made from 304 stainless steel with a 1.6mm wall thickness, it’s a serious bit of material for serious fabrication work.

If you’re building a custom 5" system and want more freedom with your routing, this is the sort of piece you’ll want sitting on the shelf.

Item: D500-304

In stock now at Performance Exhaust.

25/08/2026

When you’re heading off with a trailer, caravan or recovery setup behind you, the towbar is one of those things you want to be able to forget about.

Because the last thing you want to be thinking about halfway down the highway is whether the bar underneath your vehicle is up to the job.

That’s where Hayman Reese X-BAR comes in.

The X-BAR range is engineered and tested right here in Melbourne at a NATA-accredited facility, with testing carried out to meet Australian towing and safety requirements including AS 4177 and ADR 62/02.

It’s not just about how much weight a towbar can pull. These standards cover the strength of the bar, how it mounts to the vehicle and how the complete setup performs when it matters.

At Performance Exhaust, we have access to the full Hayman Reese X-BAR range, with options available for everything from passenger vehicles through to 4WDs and utes.

So whether you’re setting up the family car for a caravan, getting the 4WD ready for the tracks or adding a proper recovery point to your ute, we can help match the right X-BAR to your vehicle.

Built for the job. Tested for Australian conditions. Ready for wherever you’re heading next.

24/08/2026

🚨 CLEARANCE DEAL – WHILE STOCKS LAST! 🚨

We’ve got a Holden Commodore VE Ute Heavy Duty Towbar Kit sitting in clearance stock, and rather than have it sitting on the shelf, we’d rather see it bolted onto the back of someone’s ute.

Built for VE Utes from 10/2007–04/2013, this Class 4 kit has a 1600kg towing capacity and comes with the full fitting kit, wiring loom and ECU if required.

The original price?

$1,213.

The clearance price?

🔥 $798. Thats a huge 34% off!

There’s nothing wrong with it. It’s simply clearance stock, and once the stock we have is gone, this deal is gone with it.

If you’ve been meaning to put a towbar on your VE Ute, this is probably the time to do it.

⏰ Sale ends 31 August 2026 or while stocks last.

SKU : 02892RWK

👉 Available now from Performance Exhaust Nationwide.

Address

Factory 20/10 Henderson Road
Knoxfield, VIC
3180

Website

http://www.performanceexhaust.com.au/

Alerts

Be the first to know and let us send you an email when Performance Exhaust Nationwide posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Want your business to be the top-listed Equipment Service in Knoxfield?