JTA mobile welding & fabrication

JTA mobile welding & fabrication JTA mobile welding & fabrication is a newly established business servicing the mid north coast of NSW

Westerman haulage and earthmoving of kempsey asked us to modify there side tipper trailer to make the centre tarp suppor...
09/02/2026

Westerman haulage and earthmoving of kempsey asked us to modify there side tipper trailer to make the centre tarp support wall removable when switching between doing oversized rock and gravel products after seeing one we’d previously completed

Using heavy duty steel sections that will withstand the hard environment these trucks work in daily

We also added a hoop at the front of the trailer so that the hydraulic hoses can be secured up of the chassis to avoid anything being caught and damaged when the prime mover and trailer articulate

Thankyou Chris Westerman of Westerman haulage and earthmoving for asking us to undertake this project for you , glad we could help mate

For any of your welding and fabrication requirements call 0424722411 or alternatively get in touch with us via the messanger app

Some work over the long weekend repairing and rectifying cracks on a tipping body chassis of this big green tractor 💪🏻 C...
07/10/2025

Some work over the long weekend repairing and rectifying cracks on a tipping body chassis of this big green tractor 💪🏻
Cutting out the crack and rewelding and also adding some 10mm plates to strengthen the area more right were it’s crucial in the pivot point , not the comfiest of spots to get into and work but we got it done

Thankyou to the driver Jaxon and AMD earthmoving for reaching out and asking us to take on the job
We appreciate the support

For any of your welding an fabrication needs call 0424722412 or alternatively message us via the messenger app

A local quarry haulage contractor , Panther haulage recently asked us to under take some rectification work on their sid...
06/10/2025

A local quarry haulage contractor , Panther haulage recently asked us to under take some rectification work on their side tipper trailer

A new roll over tarp had been fitted however was missing the front and rear walls , so using 200mmx6mm flat bar we filled the gap adding strength using gussets to prevent any damage by machinery when loading the trailer

We were also asked to remove the fixed permanent centre tarp support wall and replace it with a removable option to ease of loading with an excavator when carting over sized rocks
Using 12mm plate and 6mm RHS we fabricated a 2 piece centre bar and when not in use fabricated a blanking plate with a locking pin for the floor to stop any small material falling out onto the road

Thankyou panther haulage for the work
We appreciate the support

Contact us today for any of your welding and fabrication requirements on 0424722411 or alternatively via the messanger app

We were recently asked to design, fabricate & install a set of low mount guard brackets on this freightliner that’s rece...
04/10/2025

We were recently asked to design, fabricate & install a set of low mount guard brackets on this freightliner that’s receiving a make over

All laser cut 12mm plate brackets that bolt up to suspension bolts notched around the springs
Made new brackets for a tail light bar incorporating the rear guards mount to the tail light bar

The aim was to hide the mounts as much as possible to give a sleek clean look all while keeping functionality, whilst there isn’t any air built in the suspension the guards still clear the tyres

Customer will paint the brackets and once reinstalled a piece of mirror finished stainless will be folded up and placed between the 2 guards to finish it all off nicely and hide the centre mount some more

She sure will be a head turner once the truck is all completed

Contact us for any of your welding & fabrication requirements

A recent quick little job on a herd bullbars bumper bar Customer wanted 25mm strips welded to the top of the bar underne...
03/10/2025

A recent quick little job on a herd bullbars bumper bar
Customer wanted 25mm strips welded to the top of the bar underneath the headlights to fill the gap a little more & a 50mm strip at the bottom to give more depth to the bar add mudflap and swing plate mounts
And a good sand and polish to top it all off and make it all pop

Contact us via phone or alternatively drop us a message for any of your welding and fabrication needs

Address

169B Ocean Drive
Kew, NSW
2439

Telephone

+61424722411

Website

Alerts

Be the first to know and let us send you an email when JTA mobile welding & fabrication posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to JTA mobile welding & fabrication:

Share