DGS Motor Sports

DGS Motor Sports Metal fabrication, wiring/tuning, engine packages, complete builds. HYPERTUNE-TURBOSMART dealer.

Tx3 turbo for Birrong Automotive definitely one of the tricker jobs I have done super tight clearance’s• custom 347ss tu...
20/05/2025

Tx3 turbo for Birrong Automotive definitely one of the tricker jobs I have done super tight clearance’s
• custom 347ss turbo manifold
• custom cooler pipes
• custom 3 inch stainless steel dump pipe
• AES Racing Mufflers dump valve fitted
•custom raditor using PWR Advanced Cooling Technology core and spal fans
• dbw conversion and foot pedal bracket
•custom air-box
• plumb back waste gate
• all Hypertune clamps and bends only the best.

Vinny’s rx8 with a proper 13b swapped in and a whole range of dgs custom parts to compliment this beautiful build, custo...
20/05/2025

Vinny’s rx8 with a proper 13b swapped in and a whole range of dgs custom parts to compliment this beautiful build, custom 347ss turbo manifold full 3inch stainless steel system with a center screamer pipe and SPmufflers to keep it quite mounted radiator with custom shroud and rubber sealed air ducting custom 100mm Hypertune cored intercooler to keep things cool, cooler pipes fitted with Hypertune hyper clamps and a air intake fitted into the factory fuse box for a oem+ look

Full custom harness for zacks rb swapped s15 featuring haltech s2 ecu, can keypad, Fuel/oil pressure and temp, neutral p...
20/05/2025

Full custom harness for zacks rb swapped s15 featuring haltech s2 ecu, can keypad,
Fuel/oil pressure and temp, neutral position, driven wheel speed, electric power steering and a whole lot more all wrapped in a neat mesh with heat shrink terminations.

A couple of upgrades to long time customer Adel with his 3sgte powered rav4 He went to a g30-770 which needed a 4 inch i...
26/12/2024

A couple of upgrades to long time customer Adel with his 3sgte powered rav4
He went to a g30-770 which needed a 4 inch intake upgrade using Hypertune clamps
A oil cooler mounted and plumbed up and some flanges changed off to the dyno to see some results.

Recent install and wire in of a Haltech 10 inch display and elite 2500 ecu.
26/12/2024

Recent install and wire in of a Haltech 10 inch display and elite 2500 ecu.

Tough little mx5 open time attack car completed for Waseem Sahib A long list of custom work was done • custom radiator a...
26/12/2024

Tough little mx5 open time attack car completed for Waseem Sahib
A long list of custom work was done
• custom radiator and intercooler mounting tubular bar work
• 3 inch full stainless dump pipe and exhaust system with rear quarter exit
• egt bungs fitted
• orb to rocker cover
• custom catch can baffled
• 2 inch hot side cooler piping in Hypertune clamps
• 2.5 inch cold side with hyper clamps
• 4 inch turbo inlet pipe
• custom header tank and overflow built into each other
• custom battery bracket
• custom ecu and pdm cover
• twin spal fan shroud with rubber trap doors
• custom radiator hard pipes
• external gate mounted to rear housing and stainless screamer pipe

This car got the dgs treatment 80mm custom intercooler Hypertune core clamps and 347ss bends custom turbo manifold 3.5 i...
06/09/2024

This car got the dgs treatment 80mm custom intercooler Hypertune core clamps and 347ss bends custom turbo manifold 3.5 inch dump pipe and full system to 2.5 inch twins, Turbosmart 6262 turbo plumbing wiring the lot will be interesting to see its numbers in the coming week.

Larger turbo setup ready to go
14/07/2024

Larger turbo setup ready to go

Tuff hilux finished up pie cut stainless cooler pipes Hypertune clamps in blue pie cut 3 inch stainless dump pipe and 3 ...
02/06/2024

Tuff hilux finished up pie cut stainless cooler pipes Hypertune clamps in blue pie cut 3 inch stainless dump pipe and 3 inch straight threw system couple odd bits oil pressure sensor mounted egt probe mounted custom catch can all plumbed up and assembled.

Neat fab job on this Landcruiser ready for some big boost triple compound setup Intercooler piping all vanjen and Hypert...
23/05/2024

Neat fab job on this Landcruiser ready for some big boost triple compound setup
Intercooler piping all vanjen and Hypertune clamps twin 3 inch stainless steel dump into 3.5 inch straight through.

Triple compound setup coming together.
18/05/2024

Triple compound setup coming together.

Neat fab job on a customers
29/04/2024

Neat fab job on a customers

Address

Lancaster Street
Ingleburn, NSW
2565

Opening Hours

Monday 10am - 4:30pm
Tuesday 10am - 4:30pm
Wednesday 10am - 4:30pm
Thursday 10am - 4:30pm
Friday 10am - 4:30pm

Website

Alerts

Be the first to know and let us send you an email when DGS Motor Sports posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to DGS Motor Sports:

Shortcuts

Share

Category