Auto Sport Imports

Auto Sport Imports Auto Sport Imports is a aftermarket and OEM parts importer dedicated for high performance car enthusiast.

We are Located in Ingleburn NSW, Please contact us to visit by appointments only.

04/06/2026

TOMEI Ti Racing Titanium Exhaust – R32 GTR.

If you’re chasing a lightweight exhaust that'll annoy your neighbours, this Titanium Exhaust from TOMEI is what you’re after.

Made from 3.5 inch titanium, you’ll get a great improvement in exhaust flow and that aggressive raspy titanium sound.

✔️ Full titanium construction
✔️ Lightweight just 7.90kg
✔️ 3.5 inch diameter
✔️ Dual muffler + optional silencer
✔️ Available for R32, R33 and R34 GTR

We also stock a large range of Tomei exhaust systems for a wide range of vehicles.

Order now through our website via the link in bio.

Gotta say, haven't seen OG honda Packaging for quite sometime!!This is Brand New IAB assembly for the Honda NSX, Common ...
02/06/2026

Gotta say, haven't seen OG honda Packaging for quite sometime!!

This is Brand New IAB assembly for the Honda NSX, Common issue on the NSX with the butterfly screws comming lose overtime which can cause catastrophic engine fauliure, Normally we will replace it with SOS Delete kit, but this time it will be a OEM replacement.

Nismo RB26 Intake ManifoldDesigned to improve airflow distribution and mid-range response without losing the character o...
31/05/2026

Nismo RB26 Intake Manifold

Designed to improve airflow distribution and mid-range response without losing the character of the RB26.

Compared to the factory manifold, the revised plenum design helps balance airflow more evenly across all cylinders, while improving response and drivability.

It also helps clean the engine bay and ads that OEM+ Nismo feel.

✔️ Improved airflow distribution
✔️ Increased mid-range response
✔️ Suits R32, R33, R34 GTR and 260RS Stagea

Performance upgrade that still looks right in the bay.

Order now at autosportimports.com.au - link in bio

25/05/2026

Manual or DCT?

Everyone’s got an opinion, but Roy’s going DCT.
Faster shifts, better times, and a lot easier to live with in traffic.

What are you picking?

20/05/2026

Project R34: PART 3

We’re getting closer to getting everything back into the car.

The rear diff and GETRAG transmission have both been fully gone through and restored. Starting with the diff:

✔️ Housing stripped and powder coated black
✔️ Flanges refinished
✔️ Hardware zinc coated
✔️ Rear cover vapour blasted
✔️ All bearings and seals replaced

The transmission and transfer case have also been gone through thoroughly:

✔️ Vapour blasted casing
✔️ Bearings and seals replaced
✔️ Synchros and sleeves inspected
✔️ Hardware zinc coated
✔️ New hoses installed

As with the rest of the build, everything has been cleaned, checked and rebuilt before going back in.

Nismo 40th Anniversary Titanium Strut Bar – R32 GTR.Reduces front end flex, improves handling and steering reponse.Finis...
17/05/2026

Nismo 40th Anniversary Titanium Strut Bar – R32 GTR.

Reduces front end flex, improves handling and steering reponse.

Finished in titanium with the 40th Anniversary detailing, it’s also light weight and looks great in the engine bay.

✔️ Lightweight titanium construction
✔️ Improves front-end rigidity
✔️ 40th Anniversary Nismo finish
✔️ Suits R32 GTR

Standard NISMO titanium strut bars for R32–R34 are also available.

Order now at autosportimports.com.au (link in bio)

Here is a first look at the Dry Carbon Z Tune Type Fenders for the R34 GTRMade with 5mm Honeycomb Pre-preg Dry Carbon Sh...
15/05/2026

Here is a first look at the Dry Carbon Z Tune Type Fenders for the R34 GTR

Made with 5mm Honeycomb Pre-preg Dry Carbon Sheet, it offers perfect structural integrity with extensive amount of weight saving.

Each Fender Weight just 1.25kg with the mesh.

Will be proceeding with installation to confirm the quality of fitment in the comming days. 😁😁

The True weight of Real Dry Carbon Parts, The complete Bumper with Mesh comes in at 2.85kg! The Packaging that it comes ...
14/05/2026

The True weight of Real Dry Carbon Parts, The complete Bumper with Mesh comes in at 2.85kg! The Packaging that it comes in is 4 times heavier.

This Bumper bar is engineeried with precision ultising highest quality of 5mm honeycomb Pre-preg Dry Carbon Sheets resulting in extreme weight saving and structural integrity.

Wait untill you see the weight of the Fender and Bonnet 😁

Made In Japan By Benetec

14/05/2026

Next shipment from Japan.

This shipment we’ve got a bit of a mix of hard-to-find gear and some of the usual favourites.

✔️ Nismo 400R FRP R33 GTR Front Bumper
✔️ Advan GT Beyond 19 x 10.5 +15 5x114.3
✔️ Nismo 40th Anniversary Steering wheels
✔️ HKS Exhausts - Large range, Stainless and Titanium options
✔️ Ohlins Road & Track coilovers

Order now at autosportimports.com.au (link in bio)

Looking for something specific? Get in touch and we’ll see what we can do.

Sneak peak of benetec dry carbon bumper bar for r34 gtrFull specs and close details will be shared shortly 😊
13/05/2026

Sneak peak of benetec dry carbon bumper bar for r34 gtr

Full specs and close details will be shared shortly 😊

Address

3/18 York Road
Ingleburn, NSW
2565

Website

Alerts

Be the first to know and let us send you an email when Auto Sport Imports posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Auto Sport Imports:

Shortcuts

Share

Category