Burnett Consulting

Name: Burnett Consulting
Address: Devonport, TAS, 7310, AU
Telephone: +61361089048

Home
Australia
Devonport, TAS
Burnett Consulting

Tertiary qualified Engineers with a focus on Heavy Industry and Equipment. AVCAIS certified.

04/06/2026

Feel free to share 👇🏼

21/12/2025

Burnett Consulting Christmas Closure

As we wrap up another big year, we want to extend a heartfelt thank you to all of our clients and customers for your trust and support over the past 12 months. It’s been a privilege working with you.

Our office will be closed from Tuesday 24 December and will reopen on Monday 5 January.

Wishing you and your loved ones a very Merry Christmas and a Happy New Year! We look forward to working with you again in 2026. 🎉

29/10/2025

GVM Upgrade & Testing — Toyota LandCruiser 79 Series

This LandCruiser 79 Series recently underwent a comprehensive upgrade including:

🔹 3" suspension lift
🔹 Wheel & tyre install
🔹 Rear axle track correction
🔹 Child restraint installation
🔹 GVM increase from 3300kg → 3780kg

Because the vehicle was lifted more than 50 mm, it underwent full VSB14 LT2 testing — including lane-change manoeuvre, brake, and handling assessments — completed under controlled conditions at Symmons Plains Raceway.

Visit our website to complete our easy online form to lodge your vehicle modification query and we'll be in touch! https://www.burnettconsulting.com.au/modification-quote

12/10/2025

🔼 How high can I lift my vehicle? 🔼

If you’re planning a lift, it’s important to know the rules. According to VSB14 Section LS guidelines:

Maximum total lift for a light vehicle: 150mm
Suspension lift: up to 75mm (3")
Body lift: up to 50mm (2")
Larger tyres: up to 50mm (2")
Total combined lift must not exceed 150mm to stay road legal and safe.

At Burnett Consulting, we make sure your modifications meet compliance standards while keeping your vehicle performing at its best.

Planning a lift? Contact us for expert advice and safe, compliant solutions.

Phone us on (03) 6108 9048 or send an email [email protected]

05/10/2025

Whether it’s for the daily commute or the toughest off-road adventure, Tasmanian drivers count on us to make sure their vehicles are safe, compliant, and ready for the road ahead.

Our Vehicle Modification Department — contracted by the Department of State Growth — provides certification services that give on-road and off-road drivers the confidence their vehicles meet the highest standards.

We’re proud to work with partners like Fatbuilds 4x4 in Shearwater, who specialise in American trucks and four-wheel drives built with care and quality.

Here’s what they had to say about working with us:
"Our business works closely with Burnett Consulting to ensure our customers receive a thorough and professional service when it comes to certification on their vehicle. Aaron and Josh are a dedicated and hardworking team that always accommodate to our needs, their knowledge is second to none. If you are after professional and reliable engineering services you can't go past Burnett Consulting. Highly recommend!"

Big thanks to the Fatbuilds 4x4 team — and to the Tasmanian drivers who trust us to keep their vehicles safe, compliant, and adventure-ready.

22/09/2025

3 Tips for Understanding Vehicle Weight

Ratings Understanding your vehicle’s weight ratings is essential for safety, compliance, and protecting your vehicle.

Here are three key areas to keep in mind:

1. Tow Capacity vs GCM
Tow capacity is the maximum weight your vehicle can legally tow. GCM (Gross Combination Mass) is the total allowable weight of your fully loaded vehicle plus the trailer. Staying within these limits ensures safe handling and avoids penalties under Tasmanian transport laws.

2. Axle Ratings and GVM
Each axle has a weight limit known as its axle rating, while GVM (Gross Vehicle Mass) is the total allowed weight of the vehicle when loaded. Exceeding either can compromise braking, suspension, and handling, and is a legal compliance issue.

3. Load Levelling
Load-levelling systems help distribute weight more evenly, but they’re not a substitute for the right springs. Don’t rely on pumping 90 psi into your airbags to level your rig — fit the correct base components first, then use load-levelling to fine-tune.

Conclusion
Knowing and respecting your vehicle’s weight ratings ensures safety, compliance with Tasmanian regulations, and a better driving experience, whether loaded or unloaded.

Partner with Burnett Consulting for solutions delivered right the first time.

burnettconsulting.com.au

07/09/2025

Got a project on your mind? Not sure what's next or where to get started? Big or small – we make it simple to get started.

On our website, you’ll find quick links like Vehicle Modifications and Engineering Services – tap the bottom and send us your query or request a quote for your current or next project.

Whether it’s compliance, design, or custom solutions, Burnett Consulting is here to bring your ideas to life. 👉

Check it out on mobile today and let’s get your project moving.

Burnettconsulting.com.au

03/09/2025

Whether it’s new product development or optimising existing mining equipment, our team’s engineering expertise helps you move forward with confidence.

Based in Tasmania, we bring hands-on industry knowledge and advanced technical skills to every project:

✅ Heavy Machinery Design & Manufacturing – custom modifications and mobile hydraulic systems designed for real-world use.
✅ Mining Sector Innovation – from converting vertical drill rigs into horizontal de-watering units to optimising structures for safety and stability.
✅ Advanced Engineering Services – 3D CAD (Creo, Inventor), FEA (Ansys), hydraulic circuit design, and systems integration.
✅ Risk Mitigation – early engagement reduces costly errors, improves performance, and extends machinery lifespan.

With a foundation built on Sustainability, Integrity, and Competency, Burnett Consulting delivers smart, safe, and sustainable solutions for the manufacturing and mining sectors.

👉 Ready to elevate your next project? Contact us today and unlock the full potential of your engineering challenges—from concept to commissioning.

31/08/2025

Compliance Checkpoint: Engine Installations & Emission Standards

Thinking about swapping out your engine? Here are a couple of key points to keep you on track:
✅ Match the engine year to your vehicle (or newer) – this ensures emissions meet the same or higher standards.
✅ Keep it standard – once modifications start, you’ll need to prove the engine still complies with emissions requirements.

Planning an engine upgrade? Chat with us first – we’ll guide you through the compliance process so it’s smooth sailing from start to finish.

29/08/2025

We don’t just do private modifications..

Tasmania-based Burnett Consulting partners with local and interstate mining, transport, engineering and manufacturing companies, delivering practical and economical engineering solutions.

Our Tertiary Qualified Engineers specialise in:
🔹 3D Product Design
🔹 Engineering Print Drafting
🔹 Geometric Tolerancing & Dimensioning

With experience across:
✅ Heavy Machinery Design
✅ Automotive Compliance & Modification
✅ Mobile Hydraulic Systems
✅ Technical Project Management

—we combine real-world industry knowledge with precision design to support projects of any scale.

📩 Contact Burnett Consulting today to discuss how we can help bring your ideas to life.

Address

Devonport, TAS
7310

Telephone

+61361089048

Website

http://www.burnettconsulting.com.au/

Alerts

Be the first to know and let us send you an email when Burnett Consulting posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Burnett Consulting:

Shortcuts

Want your business to be the top-listed Equipment Service in Devonport?