GO Industrial

GO Industrial GO Industrial is an industrial equipment supplier. INDUSTRIAL EQUIPMENT FOR YOUR PROFESSION

GO Industrial is an online industrial equipment supplier.
(2)

We have embraced technology to bring you a professional, fast and cost effective way to source what you need for your workshop, warehouse, farm or production line. Gone are the days where phone orders and in-store purchasing are the only way to get your hands on what you need. GO Industrial caters for the needs of the weekend DIY warrior, the time poor Tradie, right through to large scale industri

al operations. Keeping our fixed costs trim, taught and terrific, we can in turn keep our prices competitive, maximise convenience for you and get you your equipment faster than the rest. We have more than 20 years experience in all things industrial including Spray Painting Equipment, Valves, Fittings, Hand Tools, Workshop Equipment, Generators, Compressors, yep you name it and we have it. You can view our full range here. With a vast array of quality brands and a wide variety of product types we are here to get you what you need, when you need it.

10/09/2026

Tape's the one thing that shouldn't be missing from your kit - DIY or trade 🫑

Envo Tape gives razor-sharp lines, no bleed, and clean release with no residue - engineered for actual Australian conditions, not just indoor use. Rated 30+ days UV resistant and waterproof, so it holds up even if the job runs longer than planned.

One thing worth knowing: pull the tape off while the paint's still tacky, not once it's fully dried. Paint that dries over the tape edge tears the line when you remove it - the exact opposite of the clean finish you just spent hours taping up for.

Running a bigger job? Kraft paper's the better call over plastic film in high-heat spray work - it won't melt under spray heat and actually absorbs paint better, where plastic just beads it.

None of this is complicated. It's just the stuff that separates a clean job from a redo.

Grabbing a sprayer? Add this to the cart while you're at it - one less thing to remember later.

Full range at goind.com.au.

08/09/2026

Windy spring days call for this one trick πŸ’¨

You never know when it'll come in handy next time you're masking before a project.

(That 36mm tape sure came in handy for this one πŸ‘€)

Grab the gear at goind.com.au

06/09/2026

Deciding on what size Envo tape? Solid points from
on why 36mm edges out when it comes to masking and taping. 🀝
More tack where it counts, less chance it lifts (a win!!)

Grab the gear at goind.com.au πŸ›’

03/09/2026

Whether you're a DIY-er or paint by trade - a masking film & paper dispenser isn't just a nice-to-have, it's a need for a proper spray finish πŸ™‚β€β†•οΈ

Full rundown in the clip: loading a fresh roll, and Josh's technique for running it without the guide tab for less tension. If you're serious about spraying , this is the accessory that actually earns its keep in your toolbox. 🀝

Grab it at goind.com.au πŸ‘€

29/08/2026

Wish it was that easy.. (spoiler: it actually is, once you know where to look) πŸ‘€

This is the bit that trips people up - disconnecting the fluid section, pulling the grounding wire, and the old pump comes straight out. New one goes back in exactly the same way it came out.

Full step-by-step on our YouTube channel - every part of the swap, start to finish.

Grab the parts and the range at goind.com.au πŸ›’

29/08/2026

Wish it was that easy (spoiler: it actually is, once you know where to look) πŸ‘€

The pump's the part that does all the actual work in your QuickShot, and when something goes wrong, it's usually one of a handful of things.

Catch the full QuickShot troubleshooting video on our YouTube channel or grabe the full parts and range at goind.com.au. πŸ›’

26/08/2026

Here's a little tip for ya. 🀝

QuickShot handpiece playing up? Here's the fix, and it's a lot less scary than it looks.
A lot of people hesitate to open these up because it's electric, DeWalt-powered, all that - but it's genuinely one of the simpler repairs we do here. Only two things ever really fail on a QuickShot, and this is one of them.

Now you know how to fix it yourself.
Catch more troubleshooting on our YouTube channel.
Full parts and range at goind.com.au. 🫑

16/08/2026

Graco calls the pump "the heart of an airless sprayer" - and it's not just a figure of speech. It's the part doing the actual work - pulling paint from the source, then pushing it out under pressure.

It's also the part most people never think about - until it fails mid-job.

Here's how it breaks down across the range:

Ultra 390, 395, 450 run the Endurance Vortex pump - solid, reliable, built for occasional through to a few days a week.

Ultra XT (490 to 795) steps up further - Standard Series ships the Endurance Chromex hardened-steel pump rod, built for moderate daily runs.

ProContractor Series swaps in the MaxLife Vortex pump system - rated at 6x the packing life of a standard piston pump, with pre-oiled cartridges that swap in the field, no service centre required.

If you're spraying a few times a month, don't overthink it. If you're on the tools five days a week, the pump tech is the bit that saves you real money.

Full range at goind.com.au - talk to us about what actually suits your work.

12/08/2026

We don't talk about pressure enough. Here's why it actually matters. 🀝

Airless spraying requires nothing but pressure to atomise the paint. Your finish quality is entirely dependent on your working pressure. If your pressure drops significantly every time you pull the trigger, pulses during your spray fan, or can't keep up with the thickness of your paint, you're doomed.
The colder the weather, and the longer the hose you run, the more significant your pressure drop is going to be. You want to hold and maintain the pressure you've dialled in as closely as possible. Make sure you're sticking to a sprayer that's capable of handling your paint thickness, with a high enough flow to push the paint far (and vertically, if you're roofing).
Your pressure is going to change daily. Get used to spraying to the wet film application and spray fan produced, not to the exact number. Your pressure is affected drastically by temperature, humidity, the age of your paint, diameter of your hose, tip size, filters being used - the list goes on. Don't stick to the reading on your gauge like gospel - adapt the pressure for your conditions and nail that beautiful gradient of a spray fan. If you're tailing, you're failing.
Not all airless sprayers are made equal. Once you understand the many variables of spraying, you'll understand you get what you pay for. Motor output, pump size, component materials and engineering all matter. Take the Ultra XT range - Graco removed the gearbox entirely and fitted a high torque, newly engineered motor. Designed by a multi-billion-dollar manufacturer with one goal: hold and build pressure as reliably as possible.

At the end of the day, technique only gets you so far. The right gear for the job matters just as much as knowing how to use it.

Full range at goind.com.au - come talk to us about what actually suits your work.

08/08/2026

Same core tech as the Ultra 390 - the real upgrade is SmartControl. 🀝

It's not just the digital display. SmartControl is Graco's system reading your tip and adjusting the motor to keep pressure rock solid, so your fan doesn't spurt or pulse mid-spray.
That matters most on the jobs where every pass counts - high-end interior finishing, new builds, repaints where a pulsing fan shows up on every door.

Same pump, same gearing as the 390, just with the control to match a more demanding job.
Check out the full range at goind.com.au.

Address

Unit 2, 11-15 Baylink Avenue
Deception Bay, QLD
4508

Opening Hours

Monday 8am - 5pm
Tuesday 8am - 5pm
Wednesday 8am - 5pm
Thursday 8am - 5pm
Friday 8am - 5pm

Telephone

+61428893473

Alerts

Be the first to know and let us send you an email when GO Industrial posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to GO Industrial:

Shortcuts

Share