Psidup Fabrications

Psidup Fabrications Street and race car fabrication
(1)

Vl turbo sent in his Vl for a cage getting ready for drag challenge ✖️6 point moly cage with bolt in intrusions
29/05/2026

Vl turbo

sent in his Vl for a cage getting ready for drag challenge

✖️6 point moly cage with bolt in intrusions

Supra ✖️6 point moly cage through the dash with extra bars and cut trims to suit
26/05/2026

Supra

✖️6 point moly cage through the dash with extra bars and cut trims to suit

harropperformance blown xp delivery vanJoel brought his xp for an intake pipe from converting from a pro charger to a ha...
21/05/2026

harropperformance blown xp delivery van

Joel brought his xp for an intake pipe from converting from a pro charger to a harrop 2650.

✖️we did a 5” bell mouth in the headlight All the way to the throttle body
✖️extra piece to convert back to air cleaner under guard for street driving

Vl wagonDarcy wagon come in before the STREET MACHINE drag challenge rush 👑6 point moly weld in cage ✖️parchute tow bar ...
19/05/2026

Vl wagon

Darcy wagon come in before the STREET MACHINE drag challenge rush

👑6 point moly weld in cage
✖️parchute tow bar set up
✖️supplied parchute and cable kit
✖️supplied 3.45 gears 31 spline spool and axles

Vl turbo Saad vl will be one cool sleeper when it’s finished factory turbo manual he had strict instructions the boot...
13/05/2026

Vl turbo

Saad vl will be one cool sleeper when it’s finished factory turbo manual he had strict instructions the boot has to look full standard and has to run the big Hsv brakes and had to run factory fuel tank

✖️split tubs to the rail
✖️raised boot floor hump with factory swages
✖️Fitted full new boot floor
✖️ housing
✖️35 spline billet axles
✖️nodular Centre
✖️radial brackets on housing and body
✖️ moly arms
✖️supplied and fitted Mood Motorsports arb
✖️panard bar mount and mod panard bar
✖️set up coil overs with billet brackets
✖️supplied coil overs
✖️chassis connectors
✖️parchute set up behind fuel tank
✖️6 point moly bolt in cage
✖️fitted front coil overs and Hsv GTS brakes

Vk commodore Glen’s vk come in to fit his deep dish Simmons and some split tubs ✖️spilt tubs to the rail✖️9” housing wit...
12/05/2026

Vk commodore

Glen’s vk come in to fit his deep dish Simmons and some split tubs

✖️spilt tubs to the rail
✖️9” housing with 35 spline billet axles
✖️willwood brakes
✖️moly arms to suit factory spring
✖️adjustable brackets on diff
✖️panard bar mount and adj panard bar
✖️spare wheel delete

Vh wagon send in rookie wagon to get ready for drag challenge 👑✖️ 6 point moly weld in cage ✖️tow bar parachute ...
09/05/2026

Vh wagon

send in rookie wagon to get ready for drag challenge 👑

✖️ 6 point moly weld in cage
✖️tow bar parachute set up

The Castlemaine Rod Shop 7 sec Vl After running a 7 sec pass first time out with a single turbo, the boys down at the r...
07/05/2026

The Castlemaine Rod Shop 7 sec Vl

After running a 7 sec pass first time out with a single turbo, the boys down at the rod shop gave us the job of doing a set of twins

✖️stainless turbo manifolds
✖️mounted turbo’s under front bar with mavern mounts
✖️mounted gates
✖️exhauste out the front bar
✖️intake pipes and mounted blow off valves
✖️new radiator

Xy Gt replica with a blown Godzilla xy come to for a 325 on a 10” weld under it and it’s leaving with a blown dandy ...
05/05/2026

Xy Gt replica with a blown Godzilla

xy come to for a 325 on a 10” weld under it and it’s leaving with a blown dandy engines Godzilla

✖️split tubs
✖️new boot floor tin work
✖️ housing with floater kit
✖️moved leafs in board
✖️full suspension
✖️new engine bay inner guards and removed towers
✖️fitted new front end and power steering rack
✖️new engine mounts to suit Godzilla and turbo 400
✖️mounted fuel cell
✖️mounted willwood master and new brake lines
✖️made catch can and water box under the front guard
✖️mounted astra power steering pump and intake under other guard
✖️mounted radiator and heat exchanger
✖️mounted coils and pdm under the dash

The list on this car goes on and on
But now engine is at and to work there magic then cars off to get painted then to race wires to wire up

Vl Bt1 sent in Vl to fit some 22x11 simmons 295 Tyre ✖️split tub to the rail ✖️9” 35 spline axles ✖️adj diff brackets...
04/05/2026

Vl Bt1

sent in Vl to fit some 22x11 simmons 295 Tyre

✖️split tub to the rail
✖️9” 35 spline axles
✖️adj diff brackets
✖️moly arms to suit standard spring in factory position
✖️modify panard bar and mount
✖️all powder coated and assembled

Address

44 Tatterson Road
Dandenong South, VIC
3175

Opening Hours

Monday 8am - 4:30pm
Tuesday 8am - 4:30pm
Wednesday 8am - 4:30pm
Thursday 8am - 4:30pm
Friday 8am - 4:30pm

Telephone

+61439632636

Website

Alerts

Be the first to know and let us send you an email when Psidup Fabrications posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category