KBE Race Fab & Performance

KBE Race Fab & Performance Street and Race Fabrications
Performance engine building and upgrades
LS Cam & Engine packages

Headers & Exhaust finished up on Dan's VS Ute, one step closer.4-1 headers, 1 7/8 stepped to 2" with a 2.9" Choke sectio...
12/12/2025

Headers & Exhaust finished up on Dan's VS Ute, one step closer.

4-1 headers, 1 7/8 stepped to 2" with a 2.9" Choke section.
3.5" 304SS Purged system to the back, Should look trick with the beaver infill fitted up.

Powered by one of my 402ci N/a Builds with some RPM, keen to see it stomping around next year hopefully 🤙




XD I've been hooking into as of late - 4 Link rear clip CAD designed in house! As a kit it will require sheet metal work...
18/11/2025

XD I've been hooking into as of late -

4 Link rear clip CAD designed in house!
As a kit it will require sheet metal work like my HQ Kit, otherwise will slip straight into an XD Sedan, unlikely to fit XE/XF with Factory 4 link due to the rails I believe.

6pt weld in, tubs and rails done, onto boot floor/tank etc next.

I realise I haven't posted much of anything in a good while 🤣Spam incoming.






Some random photos of REVIN’s antics leading up to Allstars.Hilux diff out - 9 inch in, SFI case swap for safety 434ci s...
27/07/2025

Some random photos of REVIN’s antics leading up to Allstars.

Hilux diff out - 9 inch in, SFI case swap for safety
434ci shortblock with the old topend off the 411ci engine.

Should probably post some of the actual work i’ve done this year 🤣

Revin ran its first 8! What a unreal event Allstar’s drag and drive was.New 434ci Hydraulic roller engine went in the ca...
14/07/2025

Revin ran its first 8! What a unreal event Allstar’s drag and drive was.
New 434ci Hydraulic roller engine went in the car, managed a PB of 8.95 @ 149.5mph which I believe makes it the fastest N/A 235 Drag n drive car in the country currently??

Started off a bit not so good, once it put down a pass it was smooth sailing.
Winner in 235 N/A, got the win and took home $1500 in the Growl racing shootout after we decided on a split.
Took home Fastest N/A V8 and a bunch of other goodies.

Mitch’s Sp1c3y VN KBE rear end working a bit too well on his first hit, some tuning got it putting on an impressive show the rest of the weekend

Hats off to Dan, Dully and the rest of the team that made it all happen, you should all be proud what you’ve accomplished, Can’t wait for the next one hopefully with a few more KBE tuffies out there.

Big thanks to my crew Peter Cathcart, couldn’t have done it without you.






- Parallel 4-Link finished up on Pat’s HQ -800hp N/A Big block is all it took to put cracks and popped spotwelds everywh...
25/03/2025

- Parallel 4-Link finished up on Pat’s HQ -

800hp N/A Big block is all it took to put cracks and popped spotwelds everywhere in the original body mounts and floor pan đź‘€
All fits below the floor pan bar a small recess for the shocks and takes a 6” travel AFCO Shock.

These 4-links could be supplied in kit form in the future for DIY’ers or workshops if there was enough interest

3” tube Sheetmetal housing, 35 spline floaters with VT-VZ brakes
Anti-roll bar mounts straight to the 4-link brackets
Also whipped up a 3.5” 304 Stainless purged exhaust







Moving forward into 2025 and now stocking Aeroflow & Raceworks!Range of AN fittings, adapters, hose, Fuel pumps & regula...
06/01/2025

Moving forward into 2025 and now stocking Aeroflow & Raceworks!

Range of AN fittings, adapters, hose, Fuel pumps & regulators on the shelf!
Setting this up has helped greatly in the workshop and no doubt will continue to grow from here 🫡

Also stocking a bunch of Crow Cam’s LS Parts and a range of Genuine GM LS Parts.

Business hours are;
Monday-Friday: 8am-5pm
Saturdays 8am-1pm.

Located 👇
3/42 Aerodrome Rd Caboolture 4510
(Left at tarmac takeaway)




- VK Group 3 - Done and dusted, last one for the year đź‘ŠThe good bits - 6 Point moly cage with removeable door barsRadius...
24/12/2024

- VK Group 3 -

Done and dusted, last one for the year đź‘Š

The good bits -

6 Point moly cage with removeable door bars
Radius tubs
housing & Floaters with Wilwoods
ARB
KBE 4 Link kit
Sheeted boot with Infill panels to hide the battery etc

Off to get some paint laid down & I’m sure it turn out killer!!








VN SSBit of a thrash to get it out the door for the road trip event coming up in a couple weeks!The fruity bits;6 point ...
02/11/2024

VN SS

Bit of a thrash to get it out the door for the road trip event coming up in a couple weeks!

The fruity bits;

6 point moly cage with welded door bars
Radius’d tubs suit 325/50/15 on 12” rim
housing & floaters with VT-VZ brakes
ARB
KBE 4 link kit
KBE adjustable front coilovers with 14” long springs
Sheeted boot & 85L Fuel cell with a pump hanger

Ready for a gut full of nitrous 🤙






Troys VL finished up a while back ~Weld in 6 point moly cage through the dash with removable door bars.Chute mount & rej...
08/10/2024

Troys VL finished up a while back ~
Weld in 6 point moly cage through the dash with removable door bars.
Chute mount & rejig track locator 🤙




Address

Unit 3/42 Aerodrome Road
Caboolture, QLD
4510

Opening Hours

Monday 8am - 5pm
Tuesday 8am - 5pm
Wednesday 8am - 5pm
Thursday 8am - 5pm
Friday 8am - 5pm

Website

Alerts

Be the first to know and let us send you an email when KBE Race Fab & Performance posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to KBE Race Fab & Performance:

Shortcuts

Share