Modified & Driven Fabrication

Call Directions

Modified & Driven Fabrication qualified automotive body builder
offering custom fabrication and repair work onsite available
(1)

This crack in the stainless cyclone vacume tank was severely damping this vac trucks efficiency so we cam out out side o...
20/09/2026

This crack in the stainless cyclone vacume tank was severely damping this vac trucks efficiency so we cam out out side of normal hours and got it tig welded back up
keeping the truck out on site making money

🔧 FROM OFF-THE-SHELF TO SOMETHING DIFFERENT 🔥After fitting an off-the-shelf exhaust system, this customer decided they w...
17/09/2026

🔧 FROM OFF-THE-SHELF TO SOMETHING DIFFERENT 🔥

After fitting an off-the-shelf exhaust system, this customer decided they wanted something a little different for the rear — so that’s where we came in.

We modified the existing system to a twin rear setup, exiting out both sides of the vehicle. This required modifying and cutting the rear bar to suit the new exhaust layout.

We fitted a pair of Growl mufflers, then finished it off with a set of custom-made exhaust tips, fabricated specifically to suit the new bumper cut-outs perfectly.

To top it all off, the tips were passivated after welding to remove the oxide layer, leaving them with a clean, polished finish that ties the whole setup together. 👌

Another example of why sometimes an off-the-shelf system is just the starting point

🔥custom fabrication is what makes it yours🔥

🔒 A simple upgrade to make a bloody big differenceThis truck had already had the factory whale-tail lock busted open, so...
09/09/2026

🔒 A simple upgrade to make a bloody big difference

This truck had already had the factory whale-tail lock busted open, so the job was to come up with a stronger and more practical way of securing each compartment.

We fabricated and fitted custom padlock tabs to every door, giving each compartment its own solid locking point and making it a hell of a lot harder to simply force the doors open.

Sometimes the best solution isn't complicated🔧

Got a truck, trailer or piece of equipment that needs a stronger, smarter or custom solution?
Give us a call. We’ll build it to suit.

2" bonnet-exit screamer pipe on this Toyota Mark II 🔥Custom fabricated with a stainless steel dress ring on both the ins...
08/09/2026

2" bonnet-exit screamer pipe on this Toyota Mark II 🔥

Custom fabricated with a stainless steel dress ring on both the inside and outside of the bonnet, finished off with a custom heat shield to help protect the surrounding components from the heat.

Clean, functional and built specifically to suit the car — not just a hole cut in the bonnet. 👌

Got a custom idea for your build? Give us a call.

30/08/2026

A.E.S valves for when you feel like someones watching you 🤫🫣🤫

Gate upgrade without replacing the existing posts 🔧Fabricated and welded custom mounting plates to suit the electronic w...
21/08/2026

Gate upgrade without replacing the existing posts 🔧

Fabricated and welded custom mounting plates to suit the electronic worm-drive gates openers increasing the post width to 100mm without having to replace the existing posts.

We then hung and installed the gates, ready for actuators instal

Another custom solution to get the job done without ripping everything out and starting again. 💪

15/08/2026

Big or small, we do it all. 🔧

From the smallest repairs and modifications to full custom fabrication projects — if it needs making, modifying or welding, give us a call.

📲 Contact us for your next job — big or small.

14/08/2026

Out with the fixed seats and in with a custom folding setup! 🎣

Fabricated and fitted on site to make the most of every bit of available space, giving this boat a heap more room to move when it’s time to chase a few fish.

Custom built to suit the boat and the way it actually gets used. 👌

Need something similar? Give us a call and we’ll build it to suit. 🔧

09/08/2026

When Sky from Empire Auto Garage QLD - LS Specialist says she wants her car to sound absolutely OFF ITS HEAD…

There’s only one answer.

F**K YEAH, LET’S DO IT. 🔥🔧

Time to make some noise. 😈

Custom exhaust work, built to suit the car and the sound you’re chasing.

Is your turbo oil drain tucked into a bloody tight spot and surrounded by heat? 🥵🔥Sometimes the best option isn’t an off...
09/08/2026

Is your turbo oil drain tucked into a bloody tight spot and surrounded by heat? 🥵🔥

Sometimes the best option isn’t an off-the-shelf part.

For this setup, we custom made a 304 stainless oil drain with an AN-10 fitting on the end, allowing the AN hose to be relocated away from the heat and into a much better position.

When the off the shelf gear just doesn’t cut it, we’ll make it fit. 🔧

Need something custom for your build? Give us a shout.

Address

Caboolture, QLD
4510

Telephone

+61421231835

Website

Alerts

Be the first to know and let us send you an email when Modified & Driven Fabrication posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category