Campbell's Fitting & Engineering

27/01/2026

CFE installing 2x ZF 2050V gearboxes and 2x MTU V10 1625HP main engines for M.Y. Karinita.
Installing and aligning this engine/gearbox combo was a fun job and was smooth sailing straight from the pen.

23/01/2026

CFE removing 2 X V12 MTU marine engines from M.V. Karinita.

11/04/2025

These two, 22.5KVA generators are the first to be removed from the engine room to gain enough space to remove the V12 MTU main engines. CFE is currently underway on a repower project at the boat works.

01/12/2024

13/11/2024

Another set of V10 MTU 1625hp engines successfully installed and commissioned by CFE.

12/11/2024

Do you need an engine lifted or replaced? With CFE we will custom make all your lifting needs to suit your vessel and desired projects.

12/11/2024

CFE successfully replaced this vessel's faulty hot water system.

12/11/2024

Progress shots of a new structural support base for the Genico X-19 gyroscope.
CFE was tasked with custom welding a lifting frame to suit the vessel and lift and move the gyroscope out of the way to glass in a 20mm thick base plate and flatten off before re-installing the gyroscope.