Alltools WA Pty Ltd

Alltools WA Pty Ltd Welcome Australia! The Biggest Choice! The Best Range! On-Line Tool Store In Australia. All the tools

Because some of you said you couldnt make it in to the shop Monday or Tuesday🚨 **SALE EXTENDED — 1 MORE DAY** 🚨We’re ext...
25/08/2026

Because some of you said you couldnt make it in to the shop Monday or Tuesday

🚨 **SALE EXTENDED — 1 MORE DAY** 🚨

We’re extending our **40% OFF** everything on the showroom floor for an extra 24 hours.

You have until **5:00 PM Wednesday, 26 August** to grab what’s left at 40% off.

**The Details:**

* **In-Store Only:** Perth Showroom display stock
* **In-Stock Only:** Applies strictly to floor stock (no backorders)
* **Payment:** Cash or Card only
* **Hard Cut-Off:** Ends 5:00 PM, Wednesday 26 August

Once 5 PM hits tomorrow, the sale is officially wrapped up.

📍 **Alltools WA** | 204 Collier Road
📞 08 9272 7611
🌐 alltools.com.au

FINAL DAY: 40% OFF EVERYTHING IN THE SHOWROOM – ENDS 5 PM TODAYToday is the final day of our showroom floor clearance. D...
25/08/2026

FINAL DAY: 40% OFF EVERYTHING IN THE SHOWROOM – ENDS 5 PM TODAY

Today is the final day of our showroom floor clearance. Doors are open, and everything must go by 5:00 PM.

This is not an "up to" discount—every single item of stock currently on the showroom floor is 40% off.

Clearance Details:

Discount: Flat 40% off marked prices across all floor stock

Location: Alltools WA Showroom – 204 Collier Road, Bayswater

Hours: Today only – Doors close strictly at 5:00 PM

Sale Terms:

In-store purchases only (no phone, email, or online orders)

In-stock showroom items only (strictly while stock lasts—no rainchecks, holds, or backorders)

Payment: Cash or card only (strictly no on-account purchases)

First-in, first-served

If you need gear for the ute, workshop, or job site, get into the showroom before 5:00 PM today.

📍 204 Collier Road, Bayswater

📞 (08) 9272 7611

🌐 alltools.com.au

40% OFF EVERYTHING ON THE FLOOR – 2 DAYS ONLYWe’re clearing out showroom stock to make room for incoming inventory. For ...
21/08/2026

40% OFF EVERYTHING ON THE FLOOR – 2 DAYS ONLY

We’re clearing out showroom stock to make room for incoming inventory. For two days only, take 40% off across all floor stock in-store.

When:

Monday 24 & Tuesday 25 August

Where:

Alltools Showroom

204 Collier Road

What’s Included:

Everything on the floor—hand tools, power tools, air tools, storage, and workshop equipment.

Important Details:

• In-store / showroom floor stock only

• Strictly while floor stock lasts—no rainchecks or holds

• First in, first served

If you need to kit out the ute, workshop, or job site, drop in Monday or Tuesday before it's gone.

For directions or showroom details, visit alltools.com.au or call the team on (08) 9272 7611.

10/08/2026

Everyone says you should be "using AI." Nobody shows you how.You've heard AI will save you hours a week. You opened it, typed something, got a mediocre answer, and quietly closed the tab. You're not behind — you were just never shown how it actually works.This guide fixes that in an afternoon.Gett...

09/07/2026

Meeting Indigenous procurement objectives shouldn't mean compromising on technical capability or creating unnecessary supply chain complexity.

Our latest blog explores how procurement teams across mining, infrastructure, construction and defence can simplify industrial tooling procurement while supporting Indigenous procurement objectives through a Supply Nation verified supplier.

If you're involved in procurement, project delivery or commercial management, it's a practical look at balancing compliance requirements with operational performance.

Read the full article on our website at https://www.alltools.com.au/157559-2/ and discover how a consolidated procurement approach can help streamline your next project.

How many times have you pushed your safety glasses up onto your forehead because they kept fogging up, or just left them...
10/06/2026

How many times have you pushed your safety glasses up onto your forehead because they kept fogging up, or just left them in the ute because it was "just a quick cut"?

Safe Work Australia data shows that roughly 8% of all workplace injuries across the country are eye injuries. That’s around 50,000 every single year. The kicker? Up to 90% of them are entirely preventable.

If you’re relying on cheap servo sunnies or uncertified clear specs while grinding, drilling, or handling chemicals, you’re rolling the dice on your eyesight.

Our latest blog breaks down exactly what you need to look for under AS/NZS 1337 standards, why "medium impact" ratings matter, and how modern anti-fog and positive-seal specs actually solve the reasons guys ditch their eye protection on site.

Read the full guide on the website now to make sure your crew is properly protected.

https://www.alltools.com.au/workplace-eye-protection-safety-glasses-guide/

📍 204 Collier Road, Bayswater
📞 08 9272 7611

Winter is officially rolling in, and a standard hoodie isn't going to save your gear when a WA downpour hits the site. 🌧...
29/05/2026

Winter is officially rolling in, and a standard hoodie isn't going to save your gear when a WA downpour hits the site. 🌧️⚡

Water and high-end power tools don't mix. A waterlogged cordless kit or a shorted out lead doesn’t just stall the job—it burns a massive hole in your pocket and puts your safety at risk.

Before the next big front hits the Perth metro or your regional job site, make sure your setup is completely weatherproof. We’ve put together a no-nonsense winter checklist covering:

IP Ratings: What numbers you actually need to look for on your tools to survive driving rain.

Storage Upgrades: Why it’s time to ditch the damp canvas bags for sealed modular hard cases.

Site Safety: Managing RCDs, extension leads, and standing water safely in the mud.

End-of-Shift Maintenance: The 5-minute routine that stops rust before it starts.

Don’t let the winter wet catch you out or cause costly downtime.

👉 Read the full blog breakdown here: https://www.alltools.com.au/winter-is-coming-the-wet-weather-tool-gear-checklist-every-wa-tradie-needs/

Need to upgrade your weather-sealed storage or trade gear before the storms ground you? Come down and see the team.

📍 Alltools WA | 204 Collier Road, Bayswater
📞 Call us: (08) 9272 7611

🔨 TAX TIME MADNESS IS HERE! 🔨EOFY is just around the corner, and we’re dropping prices across the board to help you gear...
20/05/2026

🔨 TAX TIME MADNESS IS HERE! 🔨

EOFY is just around the corner, and we’re dropping prices across the board to help you gear up for the new financial year! From now until June 30th, Alltools WA is running our massive Tax Time Madness sale.

Whether you’re looking to upgrade your kit, replace an old reliable, or finally buy that big-ticket tool you've had your eye on—now is the time to strike.

What you need to know:

🔴 100s of products heavily discounted.

🔴 Look for the RED TAGS to score the biggest savings.

🔴 Instant asset write-off? Perfect time to maximize your tax deductions!

How to shop:
🌐 Online: Head to our website www.alltools.com.au and look for the red tags!
📍 In-Store: Drop by and see the team at 204 Collier Road, Bayswater.

Don't wait until June 30th and miss out. The madness is live right now while stocks last! 🏃‍♂️💨

Forget the flowers that fade in a week—give Mum something that lasts a lifetime! 🛠️✨Whether she’s a DIY queen, a gardeni...
04/05/2026

Forget the flowers that fade in a week—give Mum something that lasts a lifetime! 🛠️✨

Whether she’s a DIY queen, a gardening enthusiast, or the family’s resident "handy-mum," we have the gear to help her tackle any project with ease. From premium hand tools to high-performance rigging and safety gear, our shelves are stocked with professional-grade gifts she’ll actually use.

With over 20,000 products online and thousands more available in-store, you’re sure to find the perfect fit for her workshop.

📍 Visit us in-store at 204 Collier Road, Bayswater WA
or shop the range online.
🔗 www.alltools.com.au

Can’t find it on the site? We’ve likely got it in the warehouse.Our website currently hosts over 20,000 products, but th...
30/04/2026

Can’t find it on the site? We’ve likely got it in the warehouse.

Our website currently hosts over 20,000 products, but that is only a fraction of what we actually supply. We have direct access to hundreds of thousands of additional items through our supplier network, ranging from specialized industrial machinery to everyday workshop essentials.

We are updating the site with new listings almost daily, but the digital catalog is still catching up to our physical inventory.

The Rule of Thumb: If your search on the Alltools WA website comes up empty, don’t assume we don’t have it.

Before you look elsewhere, give the team a call or send us a message. There is a very high chance we have exactly what you need readily available for quick dispatch.

Contact us today:
📞 08 9272 7611
✉️ [email protected]
📍 204 Collier Road, Bayswater PERTH.

Address

204 Collier Road
Bayswater, WA
6053

Opening Hours

Monday 8:30am - 5pm
Tuesday 8:30am - 5pm
Wednesday 8:30am - 5pm
Thursday 8:30am - 5pm
Friday 8:30am - 4:30pm

Telephone

+61892727611

Website

Alerts

Be the first to know and let us send you an email when Alltools WA Pty Ltd posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Alltools WA Pty Ltd:

Shortcuts

Share

Category