Nizpro Turbocharging

17/05/2023

𝗖𝗹𝗲𝗮𝗿𝗮𝗻𝗰𝗲 𝗦𝗮𝗹𝗲 -
These are the last remaining parts of Nizpro’ s HP21 transmission development program, and still the best upgrade parts available for the ZF HP21 6 SPEED!
The kit below will make a complete upgrade HP21 BMW 135/335 TRANSMISSION.
𝑨𝒔𝒔𝒆𝒎𝒃𝒍𝒚 𝒊𝒔 𝒏𝒐𝒕 𝒃𝒆𝒊𝒏𝒈 𝒐𝒇𝒇𝒆𝒓𝒆𝒅.

𝐍𝐢𝐳𝐩𝐫𝐨 𝐔𝐩𝐠𝐫𝐚𝐝𝐞 𝐭𝐫𝐚𝐧𝐬𝐦𝐢𝐬𝐬𝐢𝐨𝐧 𝐊𝐢𝐭 𝐢𝐧𝐜𝐥𝐮𝐝𝐞𝐬 𝐭𝐡𝐞 𝐟𝐨𝐥𝐥𝐨𝐰𝐢𝐧𝐠 -
• Complete HP21 donor transmission, with torque converter. Standard used complete
• Nizpro billet input shaft and E clutch basket set up with 7 pack Exedy frictions and steels.
• Nizpro billet intermediate shaft with billet basket to suit 7 pack Exedy clutch set up.
• Nizpro Billet C clutch drive basket suit 6 pack Exedy friction pack with B drum assembly
• Hi energy D clutch 5 friction set and steel Raybestos plates.
• Exedy C clutch 6 friction set with matching steel clutch pack.
• Exedy B clutch 9 friction set with matching steel clutch pack.
• Exedy A clutch 6 friction set with matching steel clutch pack.
• Bushes to suit.
• Seal to suit.
• New pan, filter, and gasket.
• Setup recommendations data sheet included.

$6,000.00 AUD.

___________________________________________________________________

𝐀𝐥𝐬𝐨 𝐚𝐯𝐚𝐢𝐥𝐚𝐛𝐥𝐞 𝐚𝐧𝐝 𝐜𝐚𝐧 𝐛𝐞 𝐬𝐨𝐥𝐝 𝐬𝐞𝐩𝐚𝐫𝐚𝐭𝐞𝐥𝐲:
𝐂𝐨𝐧𝐭𝐚𝐜𝐭 𝐟𝐨𝐫 𝐩𝐫𝐢𝐜𝐢𝐧𝐠.
• Nizpro billet input shaft and E clutch basket set up with 7 pack Exedy friction and steels.
• Nizpro billet intermediate shaft with billet basket to suit 7 pack Exedy clutch set up.
• 1x Nizpro billet input shaft and E clutch basket
• 1 x Nizpro Billet C clutch drive basket suit 6 pack Exedy friction pack
• 1 x Exedy C clutch 6 pack Exedy friction pack
• 1x Exedy B clutch 9 friction and steel clutch pack.
• 1x Exedy A clutch 6 friction and steel clutch pack
• Used Hp21 valve body and mechatronic.
• Miscellaneous Hp21 A, C and D drum, intermediate basket, fiction, and steel plates
______________________________________________________________________

𝗔𝗹𝗹 𝗲𝗻𝗾𝘂𝗶𝗿𝗲𝘀 - 𝘀𝗮𝗹𝗲𝘀@𝗻𝗶𝘇𝗽𝗿𝗼.𝗰𝗼𝗺.𝗮𝘂 𝗼𝗿 𝗰𝗮𝗹𝗹 - +613 9738 2134
(Due to the high volume of interest expected, please do not message if interested).

23/02/2022

FOR SALE-
MoTeC M800 ECU with the following advanced upgrades, as below.

Enable M800
1. Cam Control
2. Drive by Wire
3. Gear Ignition Cut
4. Hi/Low Injection
5. Lambda Single
6. Logging 1M
7. Pro Analysis
8. Over Boost
9. Traction Control

$4,200 ONO

Call 9738 2134 or email - [email protected]

20/07/2020

We bought a new truck, so the Rangers gotta go!

Give us a bell if you are in the market - 03 9738 2134

PX MkII XLT Utility Double Cab 4dr Spts Auto 6sp 4x4 3.2DT (Jul) [Jul]

03/06/2020

SOLD
Up for sale is Dave’s 370z, 2010 Auto, Genuine Nismo body kit, Nismo/rays forged wheels, Nismo exhaust, Shockworks suspension, AAM cold air intake. This is an amazing car and has been Dave’s daily drive since 2011.
120000km
$24000
Contact us and ask for Dave if you would like further information.

03 9738 2134
[email protected]

06/05/2020

A clear reason why regular services are so important, carbon build up causes blockages and pre mature engine and turbocharger failures.

Contact us now to book in for your next service
0397382134

05/05/2020

This weapon in for an E85 conversion
We capped the power at a safe 340rwkw
Previously we had fitted
Gen 2 gtx 3576
Custom dump pipe into custom exhaust
Custom fuel system
Fmic custom boost pipes
Z32 maf
Apexi power fc
@ Nizpro Turbocharging

25/04/2020

We are all about performance - on land and on water!

23/04/2020

If you in South Australia check out E85 tuned Barra. GTX2 fitted and bolt ons. Fuel system all ready with valve springs done it was time for a tune. These engines love a drink of E85 and produce amazing numbers and great torque. Keeping boost at acceptable levels for the stock engine this Barra still punched out close to 500kw. Good luck with traction Tony.

22/04/2020

Get yourself one of our high volume Zf transmission pans to keep your trans cool under even the harshest conditions

21/04/2020

Another ZF 6hp26 hits the bench for a Nizpro stage 2 build plus one of our billet intermediate shafts.

Contact us now for all your ZF and 6R80 upgrades
03 97382134

17/04/2020

Barra tear down for a big power build coming up.
It looks like this engine has had a hard life! With cylinder 6 have some serious head gasket leakage.