MRW Fabrication

MRW Fabrication Tippers, Tags, trays, tilt slides, drop decks and other custom trailers

KEEP IT AUSTRALIAN MADE 🇦🇺 $2000 discount applies to all trailers tandem and higher All prices are excluding GST and Onr...
11/05/2026

KEEP IT AUSTRALIAN MADE 🇦🇺
$2000 discount applies to all trailers tandem and higher

All prices are excluding GST and Onroad rego
Tandem tags $47k down to $45k
Tri axle tags $57k down to $55k
48 foot car carriers $70k down to $68k
Quad axle low loaders $205 down to $198k
This also extends to all tandem and tri axle semi trailer’s

For all quotes and enquires call Nick on 0456756487 or Gerald on 0447342070

Australian made 🇦🇺 Ready for your next set up? We Have extended our sale by 7 more days! -Tandem axle tag trailers $45k ...
22/04/2026

Australian made 🇦🇺
Ready for your next set up?

We Have extended our sale by 7 more days!

-Tandem axle tag trailers $45k excl
- Tri axle tag trailers $55k excl
- 48 foot car carriers $68k excl
- quad axle low loaders $198k excl
This also extends to any trailers tandem axle or more

Please note these are all starting prices and may vary depending if you go outside what is already included in this price

Extended until 15th of May 2026

Call Nick on 0456756487 or Gerald on 0447342070

14/03/2026

Kynan From KS Civil trusted the Team at MRW to build him a strong and premium quality Tag trailer , and we absolutely cooked on this one for him 🤌🏻

MRW Tri-Axle Tag
- 1.5m Draw bar, 7m deck, 1.5m Beaver tail with ramps 2.5m long
- Pintle eye
- 2 Dual acting Hydraulic legs mounted off the front
- Storage in the drawbar for chains
- 2.9m Hammer/bucket well
- 2 Large tool boxes
- KS CIVIL & DRAINAGE laser cut in the headboard and beaver tail with Green LEDs behind the logo
- KS CIVIL & DRAINAGE laser cut in every stainless combing protector
- FUWA KHITCH Tri axle spring suspension
- Polished alloy rims
- Spare alloy rim
- Chain down points in the deck suited to machines
- Ratchet dogs for locking the ramps in at 90 degrees to the deck
- Premium marine quality power pack to power the hydraulics
- Dual acting BOSS Hydraulic rams on the ramps
- Our new style heavy duty ramps with flag holders in the sides, Over size signs and LED Tail lights
- Premium Quality PPG Paint finish Mack white/ METAFLAKE Green
- Forrest green swirl decals down the side

This was an incredible job to have the opportunity to deliver and dealing with Kynan throughout the process was nothing short of a pleasure to ensure that he was satisfied and we met all the targets he set in delivering his dream trailer, this was a good chance to show our capabilities and versatility when it comes to making a custom trailer and we are keen to do more!

For all quotes and enquires :
Nick - 0456756487
Gerald - 0447342070
[email protected]

Kynan From KS Civil trusted the Team at MRW to build him a strong and premium quality Tag trailer , and we absolutely co...
14/03/2026

Kynan From KS Civil trusted the Team at MRW to build him a strong and premium quality Tag trailer , and we absolutely cooked on this one for him 🤌🏻

MRW Tri-Axle Tag
- 1.5m Draw bar, 7m deck, 1.5m Beaver tail with ramps 2.5m long
- Pintle eye
- 2 Dual acting Hydraulic legs mounted off the front
- Storage in the drawbar for chains
- 2.9m Hammer/bucket well
- 2 Large tool boxes
- KS CIVIL & DRAINAGE laser cut in the headboard and beaver tail with Green LEDs behind the logo
- KS CIVIL & DRAINAGE laser cut in every stainless combing protector
- FUWA KHITCH Tri axle spring suspension
- Polished alloy rims
- Spare alloy rim
- Chain down points in the deck suited to machines
- Ratchet dogs for locking the ramps in at 90 degrees to the deck
- Premium marine quality power pack to power the hydraulics
- Dual acting BOSS Hydraulic rams on the ramps
- Our new style heavy duty ramps with flag holders in the sides, Over size signs and LED Tail lights
- Premium Quality PPG Paint finish Mack white/ METAFLAKE Green
- Forrest green swirl decals down the side

This was an incredible job to have the opportunity to deliver and dealing with Kynan throughout the process was nothing short of a pleasure to ensure that he was satisfied and we met all the targets he set in delivering his dream trailer, this was a good chance to show our capabilities and versatility when it comes to making a custom trailer and we are keen to do more!

For all quotes and enquires :
Nick - 0456756487
Gerald - 0447342070
[email protected]

Suns out with a shiny Silver ☀️ 💎 With more weld and less silicon than these companies building tippers that claim “prec...
05/03/2026

Suns out with a shiny Silver ☀️ 💎
With more weld and less silicon than these companies building tippers that claim “precision engineering”
Ours are actually build to last you’re just trying to maximise profits and rip your customers off by supplying an inferior finish

This is a Prime Mover to Rigid conversion we did for Carey Civil who were extremely pleased with the final result !

For all quotes and enquires on bodies that are actually built to last call Gerald on 0447342070 or Nick on 0456756487

BUILT TO LAST 💪🏻 In light of the saturation of the tipper manufacturing market we would like to point out that unlike yo...
07/02/2026

BUILT TO LAST 💪🏻

In light of the saturation of the tipper manufacturing market we would like to point out that unlike your well known OEM’s we fully weld the external of our bins aswell as the internal

The whole “try your best silicon the rest” is a method we don’t believe in especially when it comes to dropping in 10 Cubic metres of material into your body, it allows the bin to flex and twist and within a few months the silicon starts to peel out (seen this first hand)

So whilst they might charge you a little bit less, you’ll be due for repairs and maintenance just after your warranty is up this is a small trick they use to get you coming back, because they know it will do this (smart right?)

So if you are after a body that’s built to keep on the road and require less time off the road aside from Servicing just like the team at Broda did

Contact
Gerald - 0447342070
Nick - 0456756487
For a free quote, better service and all round better quality job compared to these “mass producers”
Keep on truckin’ 🛻

🌾🌾🌾 GRAIN BINS 🌾🌾🌾Here is a Hardox Grain bin we just did for another good client of ours! This Job included : Sandblast ...
13/01/2026

🌾🌾🌾 GRAIN BINS 🌾🌾🌾
Here is a Hardox Grain bin we just did for another good client of ours!
This Job included :
Sandblast and respray the chassis
5.3m Long by 2.0m High bin
1 way tailgate
Grain door (with removable grain shoot)
Grain locks
Roll Over tarp supplied and fitted by Tipper Tarps
Abrasive blasted and painted blue!
Our custom Alloy quarter guards and LED jumbo tail lights

For all quotes and Enquires call Gerald on 0447342070 or Nick on 0456756487

STANDARD RIDGID HARDOX TIPPER SET UP 🛻 Here is our latest truck to go out the door right in time for Christmas for the t...
23/12/2025

STANDARD RIDGID HARDOX TIPPER SET UP 🛻
Here is our latest truck to go out the door right in time for Christmas for the team at 🎄

These start at $34,000 +GST (not including the tarp)
For all quotes and enquires call Gerald on 0447342070 or Nick on 0456756487

We would like to thank all of our amazing clients old and new who have just come accross to us for the on going support ...
18/12/2025

We would like to thank all of our amazing clients old and new who have just come accross to us for the on going support this year, we hope everyone has a safe holiday period and that they enjoy their time with their family
Kind regards from the Team at MRWFAB

NEW RAMP DESIGN ! Hey everyone here is a feature showing our new style of ramps which we will be using from here on out,...
12/12/2025

NEW RAMP DESIGN !

Hey everyone here is a feature showing our new style of ramps which we will be using from here on out,
This is a job we completed for the EarthShaker team, with our new MRW ramps, and also a draw bar replacement, please note we do take on any job no matter how big or how small aslong as it’s with in your budget and our specialties
For all quotes and enquires call Nick on 0456756487 or Gerald on 0447342070

What a scorcher of a day it is here in Victoria and for that reason we have a scorcher of a trailer to show you guys 🔥 B...
12/12/2025

What a scorcher of a day it is here in Victoria and for that reason we have a scorcher of a trailer to show you guys 🔥

Brand new 2025 MRW SINGLE AXLE TAG TRAILER
1.5m draw bar,
6.0m deck,
1.5m Beavertail
Starting from the front back
Pintle set up
Chain lid in the draw bar
Hydraulic front leg
Laser cut sides with stainless combing guards with Forrest green swirl decals
Custom Auger rack
Hammer/ Bucket well
2x 1200mm toolboxes
440L Diesel tank
600mm toolbox to store pump
Hose reel
Water tank
Spare wheel
Polished alloys on spring suspension
Custom made dual acting Hydraulic ramps with the tail lights fitted to the ramps
Tie down points are also in the deck

These customers really took advantage of some of our extras that we do have to offer it was good seeing how much we could squeeze into this single it will definitely help with completing jobs more efficiently!

As the year comes to an end we have had people already lining up jobs to start in the new year with most of January booked out already!
For all quotes and enquires call Nick on 0456756487 or Gerald on 0447342070

Address

31 Gillespies Lane
Ballan, VIC

Opening Hours

Monday 7am - 5pm
Tuesday 7am - 5pm
Wednesday 7am - 5pm
Thursday 7am - 5pm
Friday 7am - 5pm
Saturday 7am - 1pm

Telephone

+61447342070

Website

Alerts

Be the first to know and let us send you an email when MRW Fabrication posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to MRW Fabrication:

Shortcuts

Share

Category