Rossco Engineering and Sales Pty Ltd

Rossco Engineering and Sales Pty Ltd Quality Engineering Solutions: Custom Fabrication design, machining, hydraulics, welding, sandblasting, powder coating. Steel sales, engineering supplies

Built tough. Runs on coffee. Knows a bloke. And comes standard with a lifetime supply of advice. 😄Here’s to all the dads...
05/09/2026

Built tough. Runs on coffee. Knows a bloke. And comes standard with a lifetime supply of advice. 😄

Here’s to all the dads who can fix just about anything, turn a five-minute job into a full weekend project, and somehow always have the right tool for the job.

Happy Father’s Day from the team at Rossco Engineering & Sales! 👨‍🔧☕🛠️

25/08/2026

This is what corten steel is supposed to do.

When these laser-cut panels were installed at the Woodlea housing estate, the steel had only just begun its transformation.

Now the protective rust patina has developed — deepening the colour, defining the Billy Button pattern and giving the bridge rail the finish it was designed to achieve.

Harley was passing through the area and stopped to see how the job was progressing. Just 4 months of weather have made quite a difference.

Thanks again to Ballarat Pressings for their fine laser-cutting work.

For custom fabrication that considers how a project will perform — and look — well beyond installation, give Mick a call on (03) 5367 1141 or visit www.rosscoengineering.com.au

17/08/2026

A quick sketch. A couple of racks. One less storage headache.

Our local mates at Metalcore Roofing needed a better way to store long roof flashings without them getting damaged, mixed up or left in the way.

The brief arrived much like plenty of good fabrication jobs do — a few measurements, a hand-drawn sketch and a clear idea of what needed to work.

The Rosscos team turned it into these purpose-built steel racks, ready to keep the flashings supported, organised and easy to access.

Nothing overcomplicated. Just a practical solution, built to suit the job.

Need something made to solve a storage or workshop problem? Give Mick a call on (03) 5367 1141 or visit www.rosscoengineering.com.au

09/08/2026

7.5 metres tall. Two metres square. One very careful lift.

The Rosscos team fabricated and primed this structural steel lift shaft for the Bacchus Marsh Grammar site at Woodlea, before heading out to install it in one piece.

At this size, fabrication is only half the job. The frame also has to arrive on site, clear the surrounding structures and land exactly where it belongs.

Thanks to Statewide Cranes for getting it there and Gary from Attain Cranes for helping the team guide it safely into position.

Built in the workshop. Lifted into place on site. Ready for the next stage of construction.

Need structural steelwork fabricated and installed to suit the job? Give Mick a call on (03) 5367 1141 or visit www.rosscoengineering.com.au

02/08/2026

50 rag bolts. One bridge rail. Zero room for error.

Before a single post goes up on our next bridge rail project, the boys are fitting these into the formwork — so when the concrete sets, every post drops straight on, plumb and square, first time.

It's the unglamorous stuff that makes the glamorous stuff work.

Stay tuned — the rail itself is coming.

Need structural steelwork or infrastructure fabrication done properly from the ground up? Give Mick a call on (03) 5367 1141 or visit www.rosscoengineering.com.au

26/07/2026

Fifteen years. Same client. Same exacting spec.

These frames are built by Rosscos for SeaGIS – an Australian company supplying underwater stereo camera systems to marine researchers around the world. The frames go into the ocean. Some have ended up as far away as Ireland.

They don't need to look impressive. They need to be dimensionally consistent, galvanise cleanly, and hold up in salt water indefinitely. That's the brief, batch after batch, year after year.

Galvanising coming up in the next few weeks – then these are on their way.

www.seagis.com.au

19/07/2026

Capability Spotlight

Built locally. Delivered globally.

From Bacchus Marsh to Singapore airports, Mount Isa mines and beyond – this is a look back at what Rosscos baggage conveyor work actually looks like in the field.

Fabricated and assembled here at Rosscos, then finished and shipped to some of Australia's most demanding environments.

Custom fabrication, built to suit the job – wherever it needs to go.

12/07/2026

Measure twice, cut once? Sometimes you just fabricate on-site.

For this handrail at a Ballan Builders project, the Rosscos team headed out, fabricated the rail on location to get the fit exactly right, then brought it back to the workshop for powder coating — before returning to site for final installation and sign-off.

A bit more work. A perfect result.

From one-off handrails to full balustrade runs, if it needs to be built to suit, give Mick a call on (03) 5367 1141 or head to www.rosscoengineering.com.au

05/07/2026

200 metres. Two days. Four of the boys on site.

A look back at this shared path railing project in Tarneit, with the balustrade fabricated in-house at Rosscos, galvanised by Geelong Galvanizing and installed with the assistance of Statewide Cranes.

From workshop fabrication through to site installation, this one shows the kind of practical, made-to-spec work Rosscos can deliver for public spaces, estates and infrastructure projects.

Built tough. Built to spec. Built by Rosscos.

29/06/2026

A very special custom project recently completed by Rosscos Engineering in collaboration with Wide Open Co – a variant of our usual conflict-focussed “Seats of Remembrance”.

Created in honour of close friend Greg Parry, the memorial seat was designed, fabricated and generously gifted by Rosscos to Greg’s family as a lasting tribute to his life and memory.

From initial design concepts through to fabrication, the project was carefully developed to reflect Greg’s personality, passions and the impact he had on those around him.

Greg’s seat now stands at Ballarat Cemetery as a lasting tribute, with Emma attending the memorial alongside Greg’s sister, Kira.

Some projects are more than just fabrication.

www.rosscoengineering.com.au

Address

13 Reddrop Street
Bacchus Marsh, VIC
3340

Opening Hours

Monday 8am - 5pm
Tuesday 8am - 5pm
Wednesday 8am - 5pm
Thursday 8am - 5pm
Friday 8am - 5pm
Saturday 8am - 12pm

Website

Alerts

Be the first to know and let us send you an email when Rossco Engineering and Sales Pty Ltd posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category