MFT Mechanical & Fabrication

15/07/2025

29/03/2025

Water tanker fill point in conjunction with MFT Mechanical & Fabrication!

10/01/2025

1st week back at it for the new year has been nice and busy, full of breakdowns, repairs and servicing.

11/11/2024

After someones previous repair didn't last long we decided to remove and plate the drum of this mulcher with 5mm hardox plate.

Had a piece cut a rolled/pressed to the correct radius. Bit of trimming and welding got it sitting in there as it should be. Now to reassemble and back to work for this implement.

27/08/2024

Turned this 20ft container into a storage solution for some IBC containers.

Doing this also provided the materials needed for the next job. Now we can patch some wood storage bays

22/08/2024

Call out today for a quick repair job.. looks like it's going to be a bit more work than expected..

Mud has made it past the filter system into the screw compressor.

22/07/2024

Foggy start to the morning heading to Parawa.

Disassembled the harvester head and replaced a worn measuring wheel, a few bushes and pins. Repaired some damage wiring and welded a fit g back on. Greased up and back into service.

19/04/2024

** HARDFACING **

Straighten, patched, repaired cracks and hardfaced the bottom wear plate

If you have an attachment that needs some love, get in contact.

03/04/2024

Love getting down this way!! The scenery is on point!!

18/03/2024

Trying to be sun smart!!

07/02/2024

Bit of variety today!!

Started out with some repairs on a tractor, hydraulic hose, starter motor repair, belts and levers.

Service on a cx-5 plus a set of rear brakes

Finished off with front pads and rotors on Colorado at

Best bit of the day... Catching up with mates