Micro Auto Engineering

  • Home
  • Micro Auto Engineering

Micro Auto Engineering Micro Auto Service Center and Engineering – Putting you and your car first with reliable repairs and top-notch service. Your journey, our priority.

29/05/2026

Precision matters long before the engine starts for the first time.

Here, Oom Oskar is line drilling an engine block after repair work was completed.

The purpose of the process is to make sure the crankshaft bearing tunnels are perfectly aligned and machined to specification again.

Without this step, the engine could suffer from premature bearing failure and internal damage.

It’s one of those critical behind-the-scenes processes that most people never get to see.

Sometimes the best tool in the workshop is teamwork.Around this Mercedes-Benz is a team sharing knowledge, solving probl...
27/05/2026

Sometimes the best tool in the workshop is teamwork.

Around this Mercedes-Benz is a team sharing knowledge, solving problems and making sure every detail is checked before the vehicle leaves our floor.

Because quality repairs don’t happen in isolation.

They happen when people work together.

You can’t “tighten until it feels right” on an engine build.Cylinder head bolts need to be tightened in a precise order ...
25/05/2026

You can’t “tighten until it feels right” on an engine build.

Cylinder head bolts need to be tightened in a precise order and to exact torque settings to ensure proper sealing and even pressure across the head gasket.

This process helps prevent future engine problems and keeps everything operating as designed.

Damian making sure this engine is assembled the correct way.

Still looking for a workshop you can trust with your Opel?Whether it’s servicing, diagnostics, or major repairs, we work...
22/05/2026

Still looking for a workshop you can trust with your Opel?

Whether it’s servicing, diagnostics, or major repairs, we work on Opel and General Motors vehicles regularly.

This Opel Mokka in our bay for attention from a team focused on doing repairs correctly the first time.

Professional workmanship starts here.

Behind every successful repair is a team working together.Reassembly is where patience and communication matter most. Ev...
20/05/2026

Behind every successful repair is a team working together.

Reassembly is where patience and communication matter most. Every plug, pipe and connection needs to go back exactly where it belongs.

Rhudi and Mandla finishing up this Nissan NP200 together, one step at a time.

Because reliability comes from the work people don’t usually see.

18/05/2026

There’s a right way to build an engine. This is it.

From bearings to timing, every step has to be exact. No rushing, no guessing.

Damian working through this V6 rebuild with the attention it demands.

What you’re looking at is the end result of hours of careful work.This V8 rebuild didn’t just happen overnight. Every pa...
15/05/2026

What you’re looking at is the end result of hours of careful work.

This V8 rebuild didn’t just happen overnight. Every part that went into this engine was cleaned, inspected, measured and reassembled with purpose.

Gaskets replaced, tolerances checked, fasteners torqued correctly. No guesswork, no shortcuts.

Because reliability starts long before the engine is turned on.

Precision doesn’t start at the engine. It starts here.This diesel injection pump controls how fuel is delivered to the e...
13/05/2026

Precision doesn’t start at the engine. It starts here.

This diesel injection pump controls how fuel is delivered to the engine.

During rebuilding, every nut, bolt and screw is accounted for, inspected and correctly installed.

Because reliability is built in the details you don’t see.

Never mind the Crocs… it was closing time.When parts are scarce, you don’t always get the luxury of replacing everything...
11/05/2026

Never mind the Crocs… it was closing time.

When parts are scarce, you don’t always get the luxury of replacing everything new.

In this case, one Renault engine was used to rebuild another.
Measured, checked and reassembled to keep the client on the road.

Sometimes the job isn’t straightforward.
That’s where thinking on your feet makes the difference.

This didn’t happen in one drive.Piston damage like this is the result of heat, poor lubrication, or incorrect combustion...
08/05/2026

This didn’t happen in one drive.

Piston damage like this is the result of heat, poor lubrication, or incorrect combustion building up over time.

By the time the driver notices a problem… the internal damage is already severe.

Warning signs usually show early:

• Loss of power
• Knocking under load
• Excessive smoke

Ignore them, and it ends here.

Address

59 Anderson Street

1200

Opening Hours

Monday 19:30 - 05:00
Tuesday 19:30 - 05:00
Wednesday 19:30 - 05:00
Thursday 19:30 - 05:00
Friday 19:30 - 04:00

Telephone

+27137533764

Website

Alerts

Be the first to know and let us send you an email when Micro Auto Engineering posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Micro Auto Engineering:

Shortcuts

  • Want your business to be the top-listed Equipment Service?

Share