Turbo SA

Turbo SA All things turbo we specialise in from supplying new and repairing OEM right through to performance, custom one off builds and anything in between.

Toyota GR Yaris turbo setup for rally spec. Fitted Garrett G25-500 core to keep in with the specs. Must use original com...
12/03/2022

Toyota GR Yaris turbo setup for rally spec. Fitted Garrett G25-500 core to keep in with the specs. Must use original compressor cover and turbine housing. .

Old school T04 from a draw through 202 setup to finish the year off. Rebuilt with new turbine housing supplied with matc...
26/12/2021

Old school T04 from a draw through 202 setup to finish the year off. Rebuilt with new turbine housing supplied with matching vband to replace the 4 bolt dump pipe.

Pair of 2JZ turbos in shop this week for a upgrades now running 16G billet compressor wheels, cropped steel exhaust whee...
24/12/2021

Pair of 2JZ turbos in shop this week for a upgrades now running 16G billet compressor wheels, cropped steel exhaust wheels to replace the factory ceramic ones.

Pair of TD05s from a RB build, T51r mod done to covers and custom billet adaptors to take Wiggins clamps on the intakes....
21/12/2021

Pair of TD05s from a RB build, T51r mod done to covers and custom billet adaptors to take Wiggins clamps on the intakes.

Big Borgy upgraded with a larger billet compressor wheel which removed the cast surge slots so ended up with a T51r mod ...
07/11/2021

Big Borgy upgraded with a larger billet compressor wheel which removed the cast surge slots so ended up with a T51r mod on the cover. 💪💪

Few Turbo SA boosted rigs out and about over the long weekend. Hope everyone is enjoying their time off.
02/10/2021

Few Turbo SA boosted rigs out and about over the long weekend. Hope everyone is enjoying their time off.

MY20 Isuzu DMAX in for some upgrades. Removed the turbo rebuilt and hiflowed the unit with larger billet compressor whee...
10/09/2021

MY20 Isuzu DMAX in for some upgrades. Removed the turbo rebuilt and hiflowed the unit with larger billet compressor wheel and larger thrust bearing to handle more load. The standard intercooler was replaced with a PDI cooler. Then remapped to suit the upgrades 💪

Pairs of pairs, VDJ and 3.2 Ranger/BT-50 Hiflows. PX1 and PX2, all fitted with larger billet comp wheels with comp cover...
23/08/2021

Pairs of pairs, VDJ and 3.2 Ranger/BT-50 Hiflows. PX1 and PX2, all fitted with larger billet comp wheels with comp covers machined to match and VSR balanced ready to go.

Suburu WRX old school. TD05 for a freshen up rebuilt with a 20g billet comp wheel and heavy duty thrust bearing to handl...
23/08/2021

Suburu WRX old school. TD05 for a freshen up rebuilt with a 20g billet comp wheel and heavy duty thrust bearing to handle the higher thrust loads.

Borgwarner K03 Mini Cooper Hiflow. Larger billet compressor wheel and heavy duty thrust bearing fitted.
23/08/2021

Borgwarner K03 Mini Cooper Hiflow. Larger billet compressor wheel and heavy duty thrust bearing fitted.

1hdfte Hiflow for a engine conversion going into a 75 series cruiser. We fitted a 1hdt compressor cover to make it easie...
04/08/2021

1hdfte Hiflow for a engine conversion going into a 75 series cruiser. We fitted a 1hdt compressor cover to make it easier to run the pipe work with the conversion.

1JZ single turbo from a Toyota Chaser went through the workshop today, replacing the ceramic turbine with a steel wheel ...
04/08/2021

1JZ single turbo from a Toyota Chaser went through the workshop today, replacing the ceramic turbine with a steel wheel and a larger billet compressor wheel. Ported watergate to control boost better. All these upgrades done and still a complete bolt on using all factory oil and water lines, from the outside looks like a stock turbo.

Address


Website

Alerts

Be the first to know and let us send you an email when Turbo SA posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Turbo SA:

Shortcuts

  • Want your business to be the top-listed Equipment Service?

Share